tannoy Tannoy System 600 System600SpecSheet

TANNOY SYSTEM 600 NEARFIELD MONITOR
RELIABLE
POINT SOURCE
ACCURACY
The System 600 nearfield monitor is part of a growing range
of studio monitors from Tannoy, a company with an
outstanding reputation in the professional audio world.
tweeter positioned immediately behind the centre of the bass
cone. This design produces all frequencies from a single point,
mirroring the way sound is produced in real life. The accurate
phase response achieved delivers a realistic soundstage along
with a smooth and natural sound which is unfatiguing over
long listening periods.
The speaker is capable of high volume levels without
compression and delivers an excellent transient response.
The System 600 is an ideal choice for those who want
consistent performance in a compact enclosure at a very
sensible price.
DUAL CONCENTRIC Point Source
DUAL CONCENTRIC Point Source
Tannoy Ltd., Professional Division, Coatbridge, ML5 4TF, Scotland
Tel: +44 (0)1236 420199 Fax: +44(0)1236 428230 e-mail: prosales@tannoy.com Internet site: http://www.tannoy.com
TGI North America, 300 Gage Avenue, Unit One, Kitchener, Ontario, N2M 2C8, Canada Tel: (519) 745 1158 Fax: (519) 745 2364
Tannoy Nederland b.v., Anthonetta Kuijlstraat 19, 3066 GS Rotterdam Tel: (010) 2860554 Fax: (010) 2860431
TECHNICAL SPECIFICATIONS
Loudspeaker
Frequency response (
1
) 52 Hz – 20 kHz
Recommended amplification power 50 to 150 W rms into 8
Power handling Average (2) 80 W rms Programme 160 W rms Nominal Impedance 8
Sensitivity (3) 90 dB SPL / 1 W @ 1 m
Distortion < 0.8%
Dispersion (@ -6dB) 90 conical
Crossover frequency 1.8 kHZ
Cabinet
Drive unit 165mm (6.5”) Tannoy Dual Concentric™
type 1678
Low frequency design Optimised bass-reflex loaded, in 13 litres
Cabinet construction MDF (36mm) front and back panels, 19mm high
density particle board.
Cabinet finish Spray ‘F’ Vinyl
Cabinet dimentions (HxWxD) 220mm x 360mm x 267mm
(8.6” x 14.1” x 10.5”)
Cabinet weight 7.5 kg (16.5 lbs)
Shipping dimensions (HxWxD) 450mm x 695mm x 300mm
(17.7” x 27.3” x 11.8”)
Shipping weight 17kg (37.4 lbs)
SYSTEM 600
Conventional monitor designs lock you into a tiny ‘sweet spot’
monitoring position. Move to adjust a fader and the sound changes.
Not with the Tannoy System 600 – its Dual Concentric™Point Source
design creates a coherent wavefront that is consistent both on and
off axis. The result is a high per formance reference monitor which you
can trust, providing consistent accurate sound over a wide mix
posistion.
NOTES: (1) ±3dB, measured at 1m in an anechoic chamber
(2) Long term power handling capacity as defined in EIA standard RS426A (3) Averaged over specified bandwith for half-space environment. For anechoic conditions
the figute is to be decreased by 3 dB
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications
A Member of the TGI plc Group of Companies
Part No. 6483 0485 Issue 2
266.0
360.0
35.0
45.0
220.0
APPLICATIONS
Nearfield monitoring in:
Music studiosBroadcastPost-productionAudio-VisualMobile recordingQuality control
Loading...