Tannoy SYSTEM 215 DMT II Specifications

SYSTEM 215 DMT II MAIN MONITOR

The System 215 DMT is the ultimate realisation of the Tannoy Dual Concentric™

principles in a studio monitor.

The 15" Dual Concentric™ driver, with its wide dispersion characteristics, provides

an enlarged 'sweet spot' monitoring position, while the complementary 15" bass

driver reproduces the true impact of low frequencies.

A superb, natural sounding monitoring system for those studios where only the best

is good enough.

MONITORING

THE ULTIMATE

EXPERIENCE

TECHNICAL SPECIFICATIONS

LOUDSPEAKER

Frequency response (1) 35Hz – 25kHz

Recommended amplifier power 150 to 500 w rms into 8 Ω

Power handling Average: (2) 250 wrms Programme: 500 wrms
Nominal Impedance 4 or 8 Ω

Sensitivity (3) 104 dB SPL /2.83V @ 1 m

Distortion < 0.5%

Crossover frequency 250Hz & 1.5 kHz

CABINET

Drive units 15" full range, Point Source, Dual Concentric™

15" bass unit

Low frequency design Optimised bass-reflex loaded, in 300 litres

Cabinet construction MDF (36mm - front and back; 20.6mm - top, bottom and

sides) with energy absorbing bracing matrix and TF-2
acoustic wadding.

Cabinet finish Velti shadow grey soft-texture finish. High pressure twin

laminate in shadow grey with metallic speckled finish on
top, bottom and sides.

Cabinet dimensions (HxWxD) 786 mm x 906 mm x 555 mm

(30.9” x 35.7” x 21.8mm)

Cabinet weight 85kg (187 lbs)

Shipping dimensions (HxWxD) 1020mm x 860mm x 660mm

(40.2” x 33.9” x 26”)

Shipping weight 96kg (221.2 lbs)

Tannoy Ltd., Professional Division, Coatbridge, ML5 4TF, Scotland
Tel: [phone] Fax: [phone]
e-mail: [e-mail] Internet site: http://www.tannoy.com

TGI North America, 300 Gage Avenue, Unit One, Kitchener, Ontario, N2M 2C8, Canada
Tel: [phone] Fax: [phone]

Tannoy Nederland b.v., Anthonetta Kuijlstraat 19, 3066 GS Rotterdam
Tel: [phone] Fax: [phone]

SYSTEM 215 DMT II

The availability of new materials

and manufacturing processes

has allowed Tannoy to design

the System 215 DMT II from first

principles, producing an all new

Dual Concentric™ monitoring

system with all the classic

benefits of single point source

monitoring combined with an

exceptionally detailed but

fatigue-free sound.

APPLICATIONS

Main reference monitoring in

professional facilities, including:

❚ Recording studios
❚ Mobile recording
❚ Broadcast
❚ Post production
❚ Audio visual
❚ Film studios

NOTES:
(1) ±3dB, measured at 1m in anechoic chamber
(2) Long term power handling capacity as defined in EIA
standard RS426A
(3) Averaged over specified bandwidth for half-space
environment. For anechoic conditions the figure is to be
decreased by 3dB

Tannoy operates a policy of continuous research and
development. The introduction of new materials or
manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to
alter without prior notice. Please verify the latest
specifications when dealing with critical applications

Part No. 6483 0208 Issue 3

DUAL CONCENTRIC
Point Source

A Member of the TGI plc Group of Companies

906.0

786.0

555.0

DUAL CONCENTRIC
Point Source