1% Full Power (5.6V)2nd Harmonic3rd Harmonic
40Hz0.19%0.39%
100Hz0.13%0.02%
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Ordering Information
PART NUMBERPACKED QUANTITYCOLOURMODEL NAME
8000 5190Definintion Install DS12i subBlack1
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
The bass loudspeaker shall consist of a 300mm (12.00”) low frequency transducer mounted within a vented direct radiating enclosure.
Performance of the loudspeaker, without any electronic control shall meet or exceed the following criteria: Frequency response measured at 1 metre on axis
with swept sine wave shall be 38Hz. Sensitivity shall be at least 94dB (half space) for 2.83 Volts @ 1 metre and shall be capable of producing a peak output
level of 126dB (half space) on axis at 1 metre.
The system shall have a nominal impedance of 8 Ohms and maximum power handling shall be 800 Watts (programme). The enclosure shall be an optimally
tuned (38 litre) vented enclosure of MDF construction finished in a wear resistant textured black paint.
Input connectors shall be two binding posts and the enclosure shall be fitted with 8 x M10 flying inserts and 4 x rubber feet.
he enclosure shall not exceed the following dimensions:
T
35 x 370 x 355mm or 17.13“x 14.57” x 13.98” (HxWxD)
4
he bass loudspeaker shall be the Tannoy… Definition Install DS12i sub.
T
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change