Tannoy SFX 5.1 User Manual
The setup guide
Introduction
Thank you for purchasing this high performance 5.1
home theatre system. The SFX5.1 has been built
and tested with care and precision, to provide first
class performance and reliable operation. To ensure
maximum benefit from ownership and for reasons of
safety, please read the following information before
using for the first time. Please complete and return
the enclosed warranty registration document- this
does not limit your legal rights.
Warnings and precautions
Power Requirements
Check that the voltage rating displayed on the rear
panel is correct for your area before connecting. If it
is incorrect, please refer to your local dealer or
authorised service agent, as no user adjustment
is provided.
Fuse Protection
A mains fuse is provided on the back of the subwoofer,
which can be removed with a screwdriver. Ensure the
power cable is unplugged from the outlet before doing
so, to avoid the risk of electric shock. The correct type
is shown in the specification and on the rear panel.
Important safety instructions
Read these instructions.
1.
Keep these instructions.
2.
Heed all warnings.
3.
Follow all instructions.
4.
Do not use this apparatus near water.
5.
Clean only with a dry cloth.
6.
Do not block any ventilation openings. Install in
7.
accordance with manufacturerʼs instructions.
This apparatus is not suitable for in wall mounting.
Do not install near any sources of heat such as
8.
radiators, heat registers, stoves or other apparatus
(including amplifiers) that produce heat.
The power cable is provided with a moulded
9.
plug appropriate to the country of use. If it is
unsuitable for your power outlet, consult your
local dealer of authorised service agent.
Protect the power cable from being walked on
10.
or pinched, particularly at the plug or where it
exits the apparatus.
Only use attachments/ accessories specified
11.
by the manufacturer.
Unplug this apparatus during lightning storms
12.
or when unused for long periods of time.
Refer all servicing to qualified personnel.
13.
Servicing is required when the apparatus has
been damaged in any way, such as the power
cable or plug are damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally or has
been dropped.
Warning: To reduce the risk of fire or electric
.14.
shock, this apparatus should not be exposed to
rain or moisture and objects filled with liquids,
such as vases, should not be placed on
the apparatus.
To completely isolate this apparatus from the
15.
mains, disconnect the power supply plug from
the receptacle.
The mains plug of the power supply cable shall
16.
remain readily operable.
Store complete packaging in case it is needed
17.
for re-use.
Due to the powerful drive unit magnet, do not
18.
place within 1m (3 feet) of a television or
computer monitor.
If at any time during this warranty period the
equipment proves to be defective for any reason
other than accident, misuse, neglect, unauthorised
modification or fair wear and tear, we will repair
any such manufacturing defect or, at our option,
replace it without charge for labour, parts or
return carriage.
If you suspect a problem with a Tannoy product
then, in the first instance, discuss it with your
Tannoy dealer. If you require further assistance
then we ask that you deal directly with your local
Tannoy distributor. If you cannot locate your
distributor please contact Customer Services,
Tannoy Ltd at the address given below.
Customer Services, Tannoy Ltd., Rosehall
Industrial Estate, Coatbridge, Strathclyde
ML5 4TF, Scotland
Tel: 01236 420199 (National)
+44 1236 420199 (International)
Fax: 01236 428230 (National)
+44 1236 428230 (International)
E-mail: enquiries@tannoy.com
Warranty
All of our products have been produced and tested
with care and precision to give first-class service.
All passive components are guaranteed for a
period of five years from the date of purchase from
an authorised Tannoy dealer subject to the
absence or evidence of misuse, overload, or
accidental damage.
All active and electronic components are
guaranteed for a period of one year from the date
of purchase from an authorised Tannoy dealer
subject to the absence of, or evidence of, misuse,
overload or accidental damage.
Do not ship any product to Tannoy without
previous authorisation.
Our policy commits us to incorporating
improvements to our products through continuous
research and development. Please confirm current
specifications for critical applications with
your supplier.
Loading...