Tannoy PCI 8DC, QCI 8DC Quick Start Guide

Quick Start Guide

QCI 3

High-Performance 3" Full-Range In-Ceiling Loudspeaker for
Installation Applications

QCI 8DC

High-Performance 8" Dual Concentric In-Ceiling Loudspeaker for
Installation Applications

PCI 8DC

Premium 8" Dual Concentric In-Ceiling Loudspeaker for
Installation Applications

2 QCI 3/QCI 8DC/ PCI 8DC

3Quick Start Guide

Important Safety
Instructions

Terminals marked with this
symbol carr y electrical

current of su cient
magnitude to consti tute risk of electric
shock. Use only high- quality professional
speaker cables wi th ¼" TS or twist­locking plugs pr e-installed. Allother
installation or modi cation should be
perfor med only by quali e dpersonnel.

This symbol, wherever it

appears, aler ts you to the

presence of uninsulated
dangerous voltage i nside the enclosure ­voltage that may be su cient to
constitute a risk o fshock.

This symbol, wherever it

appears, alerts you to

important operating and
maintenance instructions in the
accompanying literature. Please read
themanual.

Caution

To reduce the risk of elec tric

shock, do not re move the
top cover (or the rear sec tion). No user
serviceable pa rts inside. Refer servic ing to
quali edpersonnel.

Caution

To reduce the risk of  re or

electric shock, do not expose
this appliance to rain and moist ure.
Theapparatus shall not be e xposed to
dripping or splashing liquid s and no
objects  lled with liquids, such a s vases,
shall be placed on the appar atus.

Caution

These service instructions

are for use by quali ed
service p ersonnel only. Toreduce the
risk of elec tric shock do not perfor m any
servicing ot her than that contained in the
operation ins tructions. Repair shave to be
perfor med by quali ed se rvicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. He ed all warnings.

4. Follow all instru ctions.

5. Do not use this apparatus near water.

6. Clean only wit h dry cloth.

7. Do not bl ock any ventilation

openings. Install in accordance wit h the
manufacturer’s instructions.

8. Do not ins tall near any heat sources
such as radiators, heat r egisters, stoves,
or other apparat us (including ampli ers)
that produce heat.

9. Do not defeat the safe ty purpose
of the polarized o r grounding-type plug .
A polarized plug ha s two blades with
one wider than th e other. A grounding­type plug ha s two blades and a third
grounding p rong. The wide blade or the

third prong are p rovided for your safet y.
Ifthe provide d plug does not  t into
your outlet, consult an el ectrician for
replacement of the obs olete outlet.

10. Protec t the power cord from being
walked on or pinched p articularly at
plugs, convenience receptacle s, and the
point where t hey exit from the appar atus.

11. Use only attach ments/accessories
speci ed by themanufacturer.

12. Use only with
the cart, s tand,
tripod, br acket, or
table speci ed by the
manufac turer, orsold

with the apparatus.
When a car t is used, use caution whe n
moving the cart/apparatus combination
to avoid injury f rom tip-over.

13. Unplug this apparatus during
lightning stor ms or when unused for long
periods of time.

14. Refer all servicing to quali ed
service p ersonnel. Servic ing is required
when the apparatus has b een damaged
in any way, such as power supply cord or
plug is damaged, liquid has been spilled
or object s have fallen into the apparatus,
the apparatus ha s been exposed to rain or
moisture, does n ot operate normally, or
has beendropp ed.

15. The apparatus shall be connected to
a MAINS socket out let with a protective
earthing connection.

16. Where t he MAINS plug or an
appliance coupler is used as th e

disconnect device, the disconnect device
shall remain readily operable.

17. Correct dispo sal of
this product: This symbol
indicates that this product
must not be dispos ed of

with household waste,
according to the WEEE Dire ctive
(2012/19/EU) and your national law.
This produc t should be taken to a
collection center license d for the recycling
of waste elec trical and electronic
equipment (EEE). The mishandling of th is
type of wa ste could have a possible
negative impac t on the environment and
human health due to potentially
hazardous subs tances that are generally
associated w ith EEE. At the same time,
your cooperation in th e correct disposal of
this produc t will contribute to the
e c ient use of natural resources. Fo r
more inform ation about where you can
take your waste e quipment for recycli ng,
please contact yo ur local city o ce, or
your household waste collection service.

18. Do not ins tall in a con ned space,
such as a book case or si milar unit.

19. Do not p lace naked  ame sources,
such as lighted candles, o n the apparatus.

20. Please keep th e environmental
aspect s of battery disposal in min d.
Batterie s must be disposed-of at a
batter y collection point.

21. Use this appara tus in tropical and/or
moderate climates.

LEGAL DISCLAIMER

Music Tribe accepts no liabilit y for any loss
which may be su ered by any person wh o
relies either w holly or in part upon any
description, photograph, or statement
contained herein. Technical speci  cations,
appearances and other inform ation
are subject to chan ge without notice.
All trademar ks are the propert y of their
respect ive owners. Midas, Klark Teknik,
Lab Grupp en, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behr inger,
Bugera and Coolaudio are t rademarks
or register ed trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Glob al
Brands Ltd. 2019 All rights reser ved.

LIMITED WARRANTY

For the applicable warr anty terms and
conditions and additional infor mation
regarding Music Tribe’s Limited Warranty,
please see complete de tails online at
musictribe.com/warranty.

Zhongshan Eurotec
Electronics Limited

No. 10 Wanmei Road, South Ch ina
Modern Chinese Medicine Park,
Nanlang Town, 528451, Zhongshan City,
Guangdong Province, China

Instrucciones de seguridad

Las terminales marcadas con
este símbolo transpor tan

corriente eléctrica de
magnitud su ciente como para constituir
un riesgo de descarga eléctrica.
Utilicesolo cab les de altavoz
profesionales y de alta c alidad con
conector es TS de 6,3 mm o de bayoneta
pre jados. Cualquier otra instalación o
modi c ación debe ser realizada
únicamente por un técnicoc uali cado.

Este símbolo, siempre que

aparece, leadvier te de la

presencia de voltaje
peligroso sin aislar dentr o de la caja;
estevoltaje pu ede ser su cie nte para
constituir un ri esgo dedescarga.

Este símbolo, siempre que

aparece, leadvier te sobre

instruccio nes operativas y de
mantenimiento que aparecen en la
documentac ión adjunta. Por favor,
leaelmanual.

Atención

Para reducir el r iesgo de

descarga eléctrica, no quite
la tapa (olaparte pos terior). Nohay
piezas en el in terior del equipo que

4 QCI 3/QCI 8DC/ PCI 8DC

5Quick Start Guide

puedan ser repar adas por el usuario.
Sies necesario, pó ngase en contacto con
personal cuali cado.

Atención

Para reducir el r iesgo

de incendio o descar ga
eléctric a, no exponga este aparato a la
lluvia, humedad o alguna otra f uente que
pueda salpicar o der ramar algún líquido
sobre el aparato. Nocolo que ningún
tipo de recipiente para líquidos sobre
elaparato.

Atención

Las instru cciones de servicio

deben llevarlas a cab o
exclusivamente personal cuali c ado.
Paraevitar el rie sgo de una descarga
eléctric a, no realice reparaciones que no
se encuentren descritas en el manual
de operaciones . Lasreparaciones deben
ser realizadas exclusi vamente por
personalcuali cado.

1. Lea las instrucci ones.

2. Conserve e stas instruccione s.

3. Pre ste atención a todas

las advertencias.

4. Siga todas las inst rucciones.

5. No u se este aparato cerca del agua.

6. Limpie es te aparato con un

paño seco.

7. No blo quee las aberturas de
ventilación. Instale el equip o de acuerdo
con las instrucc iones del fabricante.

8. No instale es te equipo cerca de
fuentes de calor t ales como radiadores,

acumuladores de c alor, estufas u ot ros
aparatos (incluyendo ampli c adores)
que puedan produc ir calor.

9. No elimine o deshabilite nunca la
conexión a tier ra del aparato o del cable
de alimentación de corr iente. Unenchufe
polarizado tie ne dos polos, uno de los
cuales tiene un contac to más ancho que
el otro. Una clavija con p uesta a tierra
dispone de tres cont actos: dos polos y
la puesta a tier ra. El contacto ancho y el
tercer contacto, respec tivamente, son los
que garantizan una mayor segur idad.
Si el enchufe suminist rado con el equipo
no concuerda con la toma de cor riente,
consulte con un electricista para cambiar
la toma de corriente obs oleta.

10. Coloque el cab le de suministro de
energía de mane ra que no pueda ser
pisado y que es té protegido de objetos
a lados. Asegúrese de que el cable de
suministro de energía es té protegido,
especialmente e n la zona de la clavija y en
el punto donde s ale del aparato.

11. Use únicamente los disp ositivos o
accesorios espe ci cados p or el fabricante.

12. Use únicamente

la carretilla,
plataforma, trípode,
sopor te o mesa
especi cados por el

fabricante o
suministrados ju nto con el equipo.
Altranspor tar el equipo, tenga cuidado
para evitar daños y c aídas al tropezar con
algún obstáculo.

13. Desenchufe el equipo durante
tormentas o si no va a u tilizarlo durante
un periodo largo.

14. Confíe las reparaciones únic amente
a servicio s técnicos cuali ca dos.
La unidad requiere mantenimiento
siempre que haya sufrid o algún daño,
si el cable de suminist ro de energía o el
enchufe prese ntaran daños, sehubiera
derramado un líquido o hubie ran caído
objetos dentro del e quipo, si el aparato
hubiera esta do expuesto a la humedad
o la lluvia, si ha dejado de funcio nar de
manera normal o si ha sufr ido algún
golpe o caída.

15. Al conectar la unidad a la toma de
corriente eléc trica asegúrese de q ue la
conexión dispo nga de una unión atierra.

16. Si el enchu fe o conector de red
sirve como único medio de desconexión,
éste debe ser accesi blefácilmente.

17. Cómo debe
deshacerse de este
aparato: Este símbolo
indica que este ap arato no

debe ser tratado co mo
basura orgánica, se gún lo indicado en la
Direct iva WEEE (2012/19/EU) y a las
normativas aplicab les en su país. En lugar
de ello deberá llevarlo al punto lim pio
más cercano para el rec iclaje de sus
elementos eléc tricos/ electrónicos (EEE).
Al hacer esto esta rá ayudando a prevenir
las posibles consec uencias negativas para
el medio ambiente y la s alud que podrían
ser provocada s por una gestión

inadecuada de es te tipo de aparatos.
Además, el reciclaje d e materiales
ayudará a conser var los recursos
naturales. Para más inform ación acerca
del reciclaje de e ste aparato, póngase en
contacto con el Ayuntamiento de su
ciudad o con el punto limpio lo cal.

18. No instale esta unidad en un espacio
muy reducid o, tal como encas trada en
una librería o similar.

19. No coloque o bjetos con llama, como
una vela encendida, sob re este aparato.

20. Tenga presentes todas las
advertenc ias relativas al reciclaje y
correct a eliminación de las pilas. Las pilas
deben ser siemp re eliminadas en un
punto limpio y nunca con e l resto de la
basura orgánica.

21. Use este apar ato en rangos de
temperatura moderad os y/o tropicales.

NEGACIÓN LEGAL

Music Tribe no admite ningún tipo
de responsabilidad por c ualquier
daño o pérdida que pudie ra sufrir
cualquier persona p or con ar total
o parcialmente en la descr ipciones,
fotografías o a rmaciones contenidas
en este documento. Las especi caciones
técnicas, imágenes y ot ras informaciones
contenidas en este doc umento están
sujetas a modi caciones sin prev io
aviso. Todas las marcas comerciales
que aparecen a quí son propiedad
de sus respect ivos dueños. Midas,
Klark Teknik, La b Gruppen, Lake, Tannoy,

Turbosound, TC Electron ic, TC Helicon,
Behringer, Bugera y Coo laudio son marcas
comerciales o marcas regis tradas de
Music Tribe Global Brands Ltd. © Music
Tribe Global Brands Ltd. 2019 Reservado s
todos los derech os.

GARANTÍA LIMITADA

Si quiere conocer los det alles y
condiciones aplicable s de la garantía
así como informació n adicional sobre la
Garantía limitada de Music Tribe, consulte
online toda la infor mación en la web
musictribe.com/warranty.

Consignes de sécurité

Les points rep érés par ce
symbole po rtent une tension

électrique su sante pour
constituer un risque d’électrocution.
Utilisez uniquement des câbles
d’enceintes professionnels de haute
qualité avec  ches Jack mono 6,35 mm ou
 ches à verrouillages déjà installé es.
Touteautre installation ou mo di cation
doit être e ect uée uniquement par un
personnel quali é.

Ce symbole aver tit de la
présence d’une tension

dangereuse et non is olée à
l’intérieur de l ’appareil - elle peut
provoquer des chocs électriques.

Attention

Ce symbol signale les

consignes d’utilisation
et d’entre ! Tienimpor tantes dans
la documentat ion fournie. Lisez les
consignes de séc urité du manuel
d’utilisation del’appareil.

Attention

Pour éviter tou t risque de

choc électrique, ne pas
ouvrir le capot de l’appareil ni démonter
le panneau arrière. L’intérieur de
l’appareil ne possèd e aucun élément
réparable par l’utilisateu r. Laissertoute
réparation à un p rofessionnelquali é.

Attention

Pour réduir e les risques de

feu et de choc électrique,
n’exposez pas cet app areil à la pluie,
à la moisissure, auxgout tes ou aux
éclaboussure s. Ne posez pas de récipient
contenant un liquide sur l’appareil
(unvase par exemple).

Attention

Ces consignes de s écurité et

d’entretien sont destinées
à un personn el quali é. Pour év iter tout
risque de choc électrique, n’e ec tuez
aucune réparation sur l ’appareil qui ne
soit décrite p ar le manuel d’utilisation.

6 QCI 3/QCI 8DC/ PCI 8DC

É

7Quick Start Guide

Les éventuelles r éparations doivent
être e ectuée s uniquement par un
technicienspécialisé.

1. Lisez ces consignes.

2. Conservez ce s consignes.

3. Resp ectez tous les avertissement s.

4. Respec tez toutes les

consignes d’utilisation.

5. N’utilisez jamais l’appareil à
proximité d’un liquide.

6. Net toyez l’appareil avec un
chi on sec.

7. Veillez à ne pa s empêcher la bonne
ventilation de l’appareil v ia ses ouïes
de ventilation. Respecte zles consignes
du fabricant concernant l’ins tallation
del’appareil.

8. Ne placez pas l’appareil à pr oximité
d’une source de chaleur telle qu’un
chau age, une cuisinière ou tout appareil
dégageant de la chaleur (y compr is un
ampli depuissance).

9. Ne supprimez jamais la sécurité
des prises bipolaires ou des prises terre.
Les prises bip olaires possèdent deux
contacts de lar geur di érente. Leplu s
large est le contac t de sécurité. Les prises
terre possèd ent deux contacts plus une
mise à la terre ser vant de sécurité. Si la
prise du bloc d’alimentation o u du cordon
d’ali-mentation fourni n e correspond pas
à celles de votre installation électrique,
faites app el à un électricien po ur
e ectuer le changem ent de prise.

10. Installez le cordon d’alimentation

de telle façon que pers onne ne puisse
marcher dessus et qu’il s oit protégé
d’arêtes coupantes. Assurez-vous
que le cordon d’alimentation es t
suffisamment pr otégé, notamment
au niveau de sa prise él ectrique et de
l’endroit où il est reli é à l’appareil; cela est
également valable pour un e éventuelle
rallonge électrique.

11. Utilisez exclusivement
des accessoires e t des appareils
supplémentaires recommandés par
lefabric ant.

12. Utilisez
exclusivement des
chariots, des d iables,
desprésen toirs,
despieds et des

surfaces de travail
recommandés par le fa bricant ou livrés
avec le produit.
Déplacezprécaut ionneusement tout
chariot ou dia ble chargé pour éviter
d’éventuelles blessur es en cas dechute.

13. Débranchez l’appareil de la tension
secteur en c as d’orage ou si l’appareil
reste inutilisé pe ndant une longue
période de temps.

14. Les travaux d’entretien de l’appareil
doivent être e  ect ués uniquement par
du personn el qualifié. Aucunentretien
n’est nécessaire sauf si l’appareil est
endommagé de que lque façon que ce soit
(dommagessur le cordon d’alimentation
ou la prise par e xemple), siun liquide
ou un objet a péné tré à l’intérieur du

châssis, si l’appareil a été e xposé à la pluie
ou à l’humidité, s’il ne f onctionne pas
correc tement ou à la suite d’une chute.

15. L’appareil doit êtr e connecté à une
prise sec teur dotée d’une protection pa r
mise à la terre.

16. La pr ise électrique ou la p rise
IEC de tout appareil dénué d e bouton
marche/arrêt doit rester accessible
enpermane nce.

17. Mise au rebut

appropriée de ce produit:
Ce symbole in dique qu’en
accord avec la directive

DEEE (2012/19/EU) et les
lois en vigueur dans votre p ays, ce produit
ne doit pas êt re jeté avec les déchets
ménagers. Ce pr oduit doit être déposé
dans un point de collec te agréé pour le
recyclag e des déchets d’équipeme nts
électriques et électroniques (EEE).
Une mauvaise manipulation de ce t ype de
déchet s pourrait avoir un impac t négatif
sur l’environnement et la san té à cause
des substances potentiellement
dangereuses généralement associées à
ces équipement s. En même temps,
votre coopération dans la mis e au rebut
de ce produit contribu era à l’utilisation
e c ace des ressources naturelles.
Pour plus d’inf ormations sur l’endroit où
vous pouvez dép oser vos déchets
d’équipements pour le recyclage,
veuillez contacter vot re mairie ou votre
centre local de collec te des déchets.

N’installez pas l ’appareil dans un

18.

espace con né tel qu’une bibliothèque ou
meuble similaire.

19. Ne placez jamais d’objets
en ammés, tels que des bougies
allumées, sur l’appareil.

20. Garde z à l’esprit l’im pact
environnemental lorsque vous mettez
des piles au reb us. Les piles usées
doivent être dé posées dans un point de
collecte adapté.

21. Utilisez l’appareil dans un climat
tropical et/ou modéré.

DÉNI LÉGAL

Music Tribe ne peut être tenu pou r
responsable p our toute perte pouvant
être subie par tou te personne se  ant en
partie ou e n totalité à toute description,
photographie ou a rmation contenue
dans ce document. Les cara ctéristiques,
l’apparence et d’autres informations
peuvent fair e l’objet de modi cations
sans noti cation. Toutes le s marques
appart iennent à leurs proprié taires
respect ifs. Midas, Klark Teknik,
Lab Grupp en, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behr inger,
Bugera et Coolau dio sont des marques ou
marques déposée s de Music Tribe Global
Brands Ltd. © Music Tribe Global Bran ds
Ltd. 2019 Tous droits réservés.

GARANTIE LIMIT

E

Pour connaître les ter mes et conditions
de garantie applicables, ainsi que
les informations supplément aires et
détaillées sur la Garant ie Limitée de
Music Tribe, consultez le site Internet
musictribe.com/warranty.

Wichtige
Sicherheitshinweise

Vorsicht

Die mit dem Symbo l

markierten Anschlüsse
führen so viel Spannun g, dassdie
Gefahr eines Str omschlags besteht.
Verwenden Sie nur hoc hwertige,
professionelle Lautsprecherkabel
mit vorinstalli erten 6,35 mm MONO­Klinkensteckern oder Lautsprecherstecker
mit Drehverriegelung. Alle anderen
Installationen oder Modi kationen
sollten nur von quali ziertem
Fach perso nal au sgefü hrt we rden.

Achtung

Um eine Gefährdung durch

Stromschlag auszuschließen,
darf die Geräteab deckung bzw.
Geräterück wandnicht abgenommen

werden. ImInnern de s Geräts be nden
sich keine vom Benut zer reparierbaren
Teile. Reparaturarbeiten dürfen
nur von quali ziertem Personal
ausgeführtwer den.

Achtung

Um eine Gefährdung durch

Feuer bzw. Stromsch lag
auszuschließen, darf dieses Gerät weder
Regen oder Feuc htigkeit ausgesetz t
werden noch soll ten Spritzwasser od er
tropfende Flüssigkei ten in das Gerät
gelangen können. Ste llen Sie keine mit
Flüssigkeit gefüll ten Gegenstände, wie z.
B. Vasen, aufdasGerät.

Achtung

Die Service -Hinweise sind

nur durch quali ziertes
Personal zu b efolgen. Umeine
Gefährd ung durch Stromschlag zu
vermeiden, f ühren Sie bitte keinerle i
Reparature n an dem Gerät durch,
dienicht in der B edienungsanleitung
beschrieben sind. Reparaturen
sind nur von quali ziertem
Fachpersonaldurchzuführen.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beac hten Sie alle Warnhinweise.

4. Befolge n Sie alle

Bedienungshinweise.

5. B etreiben Sie das Gerät nicht in der
Nähe vonWasser.

6. Reinigen Sie das Ge rät mit einem
trockenen Tuch.

8 QCI 3/QCI 8DC/ PCI 8DC

9Quick Start Guide

7. Bloc kieren Sie nicht die
Belüftungsschlitze. Beachten
Sie beim Einbau des Ger ätes die
Herstellerhinweise.

8. Stellen Sie das Gerät nicht i n der
Nähe von Wärmequellen auf. Solc he
Wärmequellen sin d z. B. Heizkörper,
Herde oder ander e Wärme erzeugen de
Geräte (auch Verstär ker).

9. Entfernen Sie in kein em Fall die
Sicherheitsvorrichtung von Zweipol- oder
geerdeten Stec kern. Ein Zweipolstecker
hat zwei unterschiedlich breite
Steckkontak te. Ein geerdeter Stecker
hat zwei Steckkontak te und einen
dritten Erdu ngskontakt. Derbreitere
Steckkontakt oder der zusätzliche
Erdungskontakt di ent Ihrer Sicherheit.
Falls das mitgeliefert e Steckerfo rmat
nicht zu Ihrer Stec kdose passt, wenden Sie
sich bitte an einen Elek triker, damit die
Steckdose entsprechend ausgetauscht
wird.

10. Verlegen Sie das Ne tzkabel so,
dass es vor Tritten und sc harfen Kanten
geschütz t ist und nicht beschädigt
werden kann. Ach ten Sie bitte
insbesondere im Bereich der Stecker,
Verlängerungskabel und an der Stelle,
an der das Netzk abel das Gerät verlässt,
aufausreichendenSc hutz.

11. Das Gerät muss jeder zeit mit
intaktem Schut zleiter an das Stromnetz
angeschlossen sein.

12. Sollte der Hauptnetzstecker
oder eine Gerätesteckdose die

Funktionseinheit zum Abschalten sein,
muss diese immer zugänglich sein.

13. Verwenden Sie nur Zusatzger äte/
Zubehörteile, dielaut H ersteller
geeignet sind.

14. Verwenden Sie
nur Wagen,
Standvorrich-tungen,
Stative, Halter oder
Tische, die vom

Hersteller benannt
oder im Lief erumfang des Geräts
enthalten sind. Falls Sie einen Wagen
benutzen, seien Sie vo rsichtig beim
Bewegen der Wagen- Gerätkombination,
umVerletzung en durch Stolpern
zuvermeiden.

15. Ziehen Sie den Netzs tecker bei
Gewitter o der wenn Sie das Gerät längere
Zeit nicht benutzen.

16. Lass en Sie alle Wartungsar beiten
nur von quali ziertem Service -Personal
ausführen. EineWar tung ist notwendig,
wenn das Gerät in irgend einer Weise
beschädigt wurde (z. B. Beschädigung des
Netzkabels oder Steckers), Gegenstände
oder Flüssigkeit in das Geräteinne re
gelangt sind, das Gerät Re gen oder
Feuchtigkeit ausg esetzt wurde, das Gerät
nicht ordnungsgemäß funktioniert oder
auf den Boden gef allen ist.

17. Korrek te Entsorgung

dieses Produkts: Dieses
Symbol weist darauf hin,
das Produkt ent sprechend
der WEEE Direkt ive

(2012/19/EU) und der jeweiligen
nationalen Gesetze nicht z usammen mit
Ihren Haushaltsabf ällen zu entsorgen.
DiesesProduk t sollte bei einer
autorisierten Samme lstelle für Recycling
elektrischer und elektronischer Geräte
(EEE) abgegeben werden.
Wegen bedenklicher Substanzen,
diegenerell mi t elektrischen und
elektronischen Geräten in Verbindung
stehen, könnte eine unsachgemäße
Behandlung dieser A bfallart eine negative
Auswirkung au f Umwelt und Gesundheit
haben. Gleichzeitig gewährleistet Ihr
Beitrag zur richtigen Entsorgung dieses
Produkt s die e ek tive Nutzung
natürlicher Resso urcen. Fürweitere
Informationen zur Ents orgung Ihrer
Geräte bei einer Re cycling-Stelle nehmen
Sie bitte Kon takt zum zuständig en
städtisc hen Büro, Entsorgungsamt oder zu
Ihrem Haushaltsabfallent sorgerauf.

18. Installier en Sie das Gerät nicht in
einer beengten Um gebung, zum Beispiel
Bücherregal oder ähnliches.

19. Stellen Si e keine Gegenstände mit
o enen Flammen, etwa brennende
Kerzen, auf das Ger ät.

20. Beachten Sie b ei der Entsorgung
von Batteri en den Umweltschutz-Aspek t.
Batteri en müssen bei einer Bat terie­Sammelstelle entsorgt werden.

21. Verwenden Sie da s Gerät in
tropischen und/oder gemäßigten
Klimazonen.

HAFTUNGSAUSSCHLUSS

Music Tribe übernimmt keine Haf tung
für Verluste, die Pe rsonen entstand en
sind, die sich ganz oder teilweise auf
hier enthaltene Beschreibungen,
Fotos oder Aussage n verlassen haben.
Technische Daten, Erscheinungsbild
und andere Inform ationen können
ohne vorherige Ankündigung geändert
werden. Alle Warenzeichen sind
Eigentum der jeweiligen Inhaber. Midas,
Klark Teknik, La b Gruppen, Lake, Tannoy,
Turbosound, TC Electron ic, TC Helicon,
Behringer, Bugera und Coo laudio sind
Warenzeichen oder eingetragene
Warenzeichen der Music Tribe Global
Brands Ltd. © Music Tribe Global Bran ds
Ltd. 2019 Alle Rechte vorbehalten.

BESCHRÄNKTE GARANTIE

Die geltenden Garantiebedingungen und
zusätzliche Informationen bezüglich der
von Music Tribe gewährten bes chränkten
Garantie  nden Sie online unter
musictribe.com/warranty.

Instruções de
Segurança Importantes

Aviso!

Ter mina is m arca dos

com o símbolo carre gam
corrente elétr ica de magnitude
su ciente para constituir um risco de
choque elét rico. Use apenas cabos de
alto-falantes de alta qualidade com
plugues TS de ¼" ou plugue s com trava
de torção pré-in stalados. Todas as outras
instalações e mo di cações devem s er
efetuadas por pe ssoasquali cadas.

Este símbolo, onde quer que

o encontre, alerta- o para a

leitura das instruçõ es de
manuseamento que acompanham o
equipamento. Por f avor leia o manual
deinstruções.

Atenção

De forma a dim inuir o

risco de choque eléctrico,
nãoremover a cober tura (ouasecção de
trás). Não existem peças subst ituíveis
por parte d o utilizador no seu interio r.
Para esse efeito r ecorrer a um
técnicoquali cado.

Atenção

Para reduzir o ri sco de

incêndios ou cho ques

eléctricos o aparelho não deve ser exposto
à chuva nem à humidade. Alémdiss o, não
deve ser sujeito a salp icos, nem devem ser
colocados em cima do ap arelho objectos
contendo líquidos, taiscomojar ras.

Atenção

Estas instr uções de operação

devem ser utili zadas,
emexclusivo, por téc nicos de assistência
quali c ados. Para evitar choques
eléctrico s não proceda a reparações
ou intervenções, que não as indic adas
nas instruções de op eração, salvo se
possuir as quali - cações necessárias.
Para evitar choque s eléctricos não
proceda a reparações ou inter venções,
que não as indicadas nas instr uções de
operação. Só o de verá fazer se possuir as
quali caçõesnecessárias.

1. Leia estas instruções.

2. Guarde estas instruções.

3. Pre ste atenção a todos os avisos.

4. Siga todas as instr uções.

5. Não u tilize este dispositivo perto

de água.

6. Limpe ape nas com um pano seco.

7. Não obs trua as entradas de

ventilação. Instale de acordo com as
instruções do fabr icante.

8. Não instale per to de quaisquer
fontes de calor tais como radiadores,
bocas de ar quen te, fogões de s ala
ou outros aparelhos (incluindo
ampli cadores) que produzam calor.

9. Não anule o objectivo de segu rança

10 QCI 3/QCI 8DC/ PCI 8DC

11Qui ck Start Guide

das  chas polarizadas ou do tipo de
ligação à terra. Uma  cha polarizada
dispõe de duas palhet as sendo uma
mais larga do que a outra. Uma  cha
do tipo ligação à ter ra dispõe de duas
palhetas e um terceiro dente d e ligação
à terra. A palheta lar ga ou o terceiro
dente são forne cidos para sua segurança.
Se a  cha fornecida não encaixar na sua
tomada, consulte um electricista para a
substituição da tomada obsoleta.

10. Proteja o cabo de alime ntação de
pisadelas ou aper tos, especialmente
nas  chas, extensões, e no loca l de
saída da unidad e. Certi q ue-se de
que o cabo eléc trico está protegido.
Veri que particularmente nas  chas,
nos receptácu los e no ponto em que o
cabo sai doap arelho.

11. O aparelho tem de est ar sempre
conectad o à rede eléctrica com o
condutor de protecção intacto.

12. Se utilizar uma  cha de
rede princip al ou uma tomada de
aparelhos para desligar a unidade
de funcionamento, esta deve estar
sempre acessível.

13. Utilize apenas ligações/acessórios
especi cados pelofabricante.

14. Utilize apenas

com o carrinho,
estrutura, tripé,
suporte, ou mesa
especi cados pelo
fabricante ou

vendidos com o dispo sitivo. Quandoutilizar

um carrinh o, tenha cuidado ao mover o
conjunto carrinho/dispositivo para evitar
danos provocados pela ter pidação.

15. Desligue este dispositivo durante
as trovoadas ou quando não for ut ilizado
durante longos p eríodos detempo.

16. Qualque r tipo de reparação deve
ser sempre e fectuado por pess oal
quali cado. É necessária uma reparaç ão
sempre que a uni dade tiver sido de
alguma forma dani cada, como por
exemplo: no caso do c abo de alimentação
ou  cha se encontrarem dani c ados;
naeventualidade de líquido ter sido
derramado ou objec tos terem caído
para dentro do d ispositivo; no caso da
unidade ter est ado exposta à chuva
ou à humidade; seesta não fu ncionar
normalmente, ou se t iver caído.

17. Correc ta eliminação

deste produto: es te símbolo
indica que o prod uto não
deve ser eliminado

juntamente com os resíduos
domésticos, s egundo a Directiva R EEE
(2012/19/EU) e a legislação nacional. Este
produto dever á ser levado para um centro
de recolha licenciado para a rec iclagem de
resíduos de equipamento s eléctricos e
electrónicos (EEE). O tratamento incorre cto
deste tipo de re síduos pode ter um eventual
impacto ne gativo no ambiente e na saúde
humana devido a substâncias
potencialmente perigosa s que estão
geralmente asso ciadas aos EEE. Ao mesmo
tempo, a sua colaboração par a a eliminação
correct a deste produto irá contrib uir para a

utilização e ciente dos recur sos naturais.
Paramais informação acerc a dos locais onde
poderá deixar o s eu equipamento usado
para reciclag em, é favor contactar os
serviços munic ipais locais, a entidade de
gestão de re síduos ou os serviços de r ecolha
de resíduosdomés ticos.

18. Não instale em lugare s con nados,
tais como estantes ou unidades similares.

19. Não coloque f ontes de chama,
tais como velas acesa s, sobre o aparelho.

20. Favor, obedecer os aspectos
ambientais de descarte de bateria.
Baterias devem se r descartadas em um
ponto de coletas de bater ias.

21. Use este apar elho em climas
tropicais e/ou moderados.

LEGAL RENUNCIANTE

O Music Tribe não se responsabili za por
perda alguma que pos sa ser sofrida por
qualquer pessoa que dependa, seja de
maneira completa ou parcial, de qualquer
descrição, fotogra a, ou declaração aqui
contidas. Dados técnicos, aparências
e outras infor mações estão sujeitas
a modi cações sem aviso p révio.
Todas as marcas são proprie dade de seus
respect ivos donos. Midas, Klark Teknik,
Lab Grupp en, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behr inger,
Bugera e Coolaudio s ão marcas ou marcas
registradas d o Music Tribe Global Brands
Ltd. © Music Tribe Global Brands Ltd.
2019 Todos direitos re servados.

GARANTIA LIMITADA

Para obter os termos de garant ia
aplicáveis e condições e info rmações
adicionais a respeito da garantia limit ada
do Music Tribe, favor veri car detalhes na
íntegra através do web site musictribe.
com/warranty.

12 QCI 3/QCI 8DC /PCI 8DC

13Quick Star t Guide

Introduction

Thank you fo r purchasing this Tannoy hi gh-perfor mance ceiling loudsp eaker. This product r ange is suited for hi gh-level music and sp eech
reinfor cement applicati ons requiring exce ptional sonic qual ity with uncomp romised reliabil ity.

Features

PCI 8DC

• Premium, hig h-definit ion loudspeaker for c eiling installati on applications • 8" D ual Concentric drive r featuring Tannoy point-source
symmet rical dispersi on technology • Tulip Wavegu ide enhances the poin t source symmetr ical dispersio n properties, p roviding exceptional high
freque ncy clarity an d articulatio n • Blue Kevlar® cone wi th high-excur sion, rubber surr ound for high power ha ndling • 3-way variabl e HF switch
for cust omised perfo rmance prefere nces

QCI 8DC

• High-pe rformance lou dspeaker for ceiling in stallation appli cations • 8" Dual Concen tric driver featu ring
Tannoy Omnimagn et technology • Pol ypropylene cone w ith rubber surro und for high-exc ursion lineari ty

QCI 3

• High-pe rformance lou dspeaker for in- ceiling installat ion application s • 3" full-range dr iver with high excu rsion rubber sur round • Glass fib re
cone for exc ellent sound qualit y and dynamic full r ange perform ance • Compact, smal l footprint desi gn for smaller spaces

Common Features:

• Extr emely thin bezel fo r discreet inst allation • Includes r ound and square baf fles and gri lles for versatil e applications • Rig id chassis for

improved b ass perform ance and durable app lication • Integra ted construc tion for easy inst allation • Semi mat t white finish f its unobtrusively
in any enviro nment • Powder coated UV r esistant per forated steel me sh grille with dus t protection • Re movable grilles f or custom
painting • S elf-aligning clam p mounting syste m • Optional Tannoy logo gr ille badge include d

Unpacking

Every Tannoy pr oduct and access ory is carefu lly inspected b efore packing. Af ter unpacking , please inspec t your product to ma ke sure no damage
has occur red in transit. In th e unlikely event of any dama ge, would you please no tify your dealer i mmediately and ret ain your shipping c arton,
as your deale r may ask you to return th e faulty unit to th em for inspect ion.

Safety Notices

Some regi onal construc tion codes requi re the use of a second ary method of se curing loudspea kers in ceiling to prov ide securit y of a
backup su pport. A secon dary support l ine should be att ached from the rea r of the product to a s ource point on the cei ling. Please consul t
the releva nt construct ion codes in your reg ion.

When using a p ower driver to insta ll the product it i s essential to use th e correct torqu e level settings t o avoid over tightening an d damage to
the ceiling m aterial or clamps.

Recommen ded torque set ting: 1.5 Nm.
Tannoy will not be he ld responsible f or any damages cause d by the improper ins tallation of thes e loudspeakers.

14 QCI 3/QCI 8DC /PCI 8DC

15Quick Star t Guide

Product Feature Identi cation

QCI3

Removable Covers (X3)
(for access to Clamping
Mechanism)

Speake r Assembl y Speake r Assembl y with Squar e Ba e

Speaker Wiring
Screw Terminals

Secondary
Safety Point

Integral Back Can

Supplied Items

Circular Grille Assembly

Square Grille Assembly Square Ba e for Squar e Grille

Clamps (X3)

16 QCI 3/QCI 8DC /PCI 8DC

17Quick Sta rt Guide

Product Feature Identi cation

QCI 8DC

Dual Concentric Speaker

Screws (X4) for
tightening Clamps

Speaker Assembly Speaker Assembly Rear View

Speaker Wiring Screw Terminals

Mounting
Clamps (X4)

Supplied Accessories

Square Grille

Circular Grille

Square Ba e for Squar e Grille Paint Ma sk for Squar e Ba e

Circular Ba e for Circu lar Grill e Paint Ma sk for Circ ular Ba e

Cutout Installation Template

18 QCI 3/QCI 8DC/PCI 8DC

19Quick Star t Guide

Product Feature Identi cation

PCI 8DC

Dual Concentric Speaker

Locks (X3) for
securing Speaker
into Speaker Frame

HF switch (3-positions)

Speaker Assembly Speaker Frame

Speaker Wiring Screw Terminals

Mounting
Clamps (X4)

Supplied Items

Square Grille

Circular Grille

Square Ba e for Squar e Grille

Circular Ba e for Circu lar Grill e

Paint Ma sk for Squar e Ba e

Paint Ma sk for Circ ular Ba e

Speake r and Frame Ass embly

Cutout Installation Template

Speake r Frame Rear Vi ew

20 QCI 3/QCI 8 DC/PCI 8 DC

Wiring and Setting Up

Terminal Connections

1. WARNI NG: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.

2. Before switching the ampli er ON, double check that all connections are secure and that the polarity is correct.

3. Note: For each speaker in this series, the correct square or circular ba e has to be  tted before connecting the
speaker wiring. (The ba es are  t ted from behind, and so the speaker wires cannot be connected while the ba es
are being installed.)

4. The two screw terminals on the rear of each speaker are labled positive (+) and negative (-). These connect
respectively to the positive (+) and negative (-) output terminals of your audio power ampli er.

5. Strip o approximately 8 mm (¼ ") of the outer protective layer of one conductor and twist its inner cores
together to prevent shorting from stray wires. Inser t the core into the screw terminal while ensuring that correct
polarity is maintained. Repeat this for both speaker wires. Tighten the two screws to make a secure connection.

6. The screw terminals for the QCI3 and QCI 8DC are located on the rear of each speaker. The screw terminals for the
PCI 8DC are located on the speaker frame. The PCI 8DC frame can be preinstalled and wired up, and the speaker
assembly added at a later stage.

QCI3 Terminals QCI 8DC Terminals PCI 8DC Terminals

21Quick Star t Guide

22 QCI 3/QCI 8DC/PCI 8DC

23Quick Start G uide

Installation

QCI3

1. WARNI NG: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.

2. The procedure below describes the installation of the QCI3 speaker into a typical stud ceiling or wall with
drywall/plasterboard.

3. Locate a suitable mounting position for the speaker, using a stud- nder.
WARNI NG: Make sure that there are no power lines, other cables, or plumbing such as water, sewer, gas lines in
the chosen cutout location. Also make sure that the location is far enough from the closest wall stud so that the
clamping mechanism can operate without interference.

4. Carefully mark and cutout a 117 mm (4.6") diameter hole in the drywall/plasterboard, and remove any debris.

5. Run the speaker wire from your ampli er to this location, leaving enough slack to allow for the connection.

6. To use the square speaker grille, push the speaker into the supplied square ba e. The circular grille does not
need a circular ba e, as it  ts directly over the speaker.

Square Ba e

7. Pull out the 3 covers from the front of the speaker which hide the clamping system.

Covers (X3)

Cable-ties (X3)

8. Each clamp can move up and down in its slot by  rst pulling out the “cable-ties” from their tucked (stowed) position,
and releasing the tab. With the tab held, move each clamp backwards down the slot as far as it will go, so the clamps
will be at the rear of the can, and inside the diameter of the cutout hole.

Release Tab Release Tab UP

Cable-tie in tucked position Cable-tie pulled out

9. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the
speaker terminals. Make sure to check that the polarity is correct and that the positive and negative wires are
securely and correctly connected.

10. Press the speaker (or speaker and square ba e assembly) into the cutout hole in the wall, making sure that the
speaker wires are not trapped.

11. Pull the clamp cable-ties forward as far as they will go. This will move the clamps forward and secure the
speaker to the wall.

24 QCI 3/QCI 8DC/PCI 8DC

25Quick Start G uide

12. CAUTION: do not cut o the excess cable-tie length, or the clamps can no longer be reused. Instead, tuck the excess
length back into the slots and then re-install the three covers.

Covers (X3)

Cable-ties (X3)
tucked

13. To remove the speaker at any time, remove the three covers, pull the cable-ties out of their tucked position, and then
press the tabs, and this will allow you to pull the speaker forwards and out of the hole.

14. Install the circular grille by pressing it over the speaker. Small magnets hold it in place.

15. Alternatively, install the square grille by pressing it over the square ba e. Small magnets in the speaker surround
and the square ba e hold it in place.

Note: After installation, if the square ba e does not press  at against the drywall, insert a ½ " long screw in the oval
depression in each corner of the ba e, and hand-tighten until the ba e is  at against the drywall.

Magnets (X8)

Insert extra screw here,
if required (see note)

Magnets (X4)

26 QCI 3/QCI 8DC/P CI 8DC

27Quick Star t Guide

INSTALLATION

QCI 8DC

1. WARNI NG: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.

2. The procedure below describes the installation of the speaker into a typical stud ceiling or wall with
drywall/plasterboard.

3. Locate a suitable mounting position for the speaker, using a stud- nder.
WARNI NG: Make sure that there are no power lines, other cables, or plumbing such as water, sewer, gas lines in
the chosen cutout location. Also make sure that the location is far enough from the closest wall stud so that the
clamping mechanism can operate without interference.

4. Use the supplied cutout template as a guide, and cut out a circular hole in the drywall/plasterboard. Remove any
debris from the hole. Use a suitable adhesive in the local area inside the hole to seal the drywall to the studs and
joists, to prevent ceiling buzzing.

Cutout Installation Template

5. Run the speaker wire from your ampli er to this location, leaving enough slack to allow for the connection.

6. To use the square speaker grille,  rst move the mounting clamps out of the way by undoing the four screws
accessible from the front of the speaker. Remove the backing from the strips of double-sided tape, and push the
speaker into the supplied square ba e.

Clamp Screws (X4)

7. If you want to use the circular speaker grille, install the supplied circular ba e instead.

Circular Ba e Circular Ba e and Speaker

Square Ba e Square Ba e and Speaker

8. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the speaker
terminals. Make sure to check that the polarity is correct and that the positive and negative wires are securely and
correctly connected.

9. Make sure that the clamps are all in their rest position, then press the speaker/ba e assembly into the cutout hole in
the wall, making sure that the speaker wires are not trapped.

28 QCI 3/QCI 8 DC/PCI 8DC

29Quick Start G uide

10. Tighten the four screws accessable from the front of the speaker, until all four clamps are holding the
speaker in place.

As the screws are tightened, the clamps rotate out of their rest postion and clamp to the

drywall/plasterboard.
Note: After installation, if the square ba e does not press  at against the drywall, insert a ½ " long screw in the oval

depression in each corner of the ba e, and hand-tighten until the ba e is  at against the drywall.

Clamp Screws (X4)

Insert extra screw here,
if required (see note)

11. Install the square grille by pressing it into the square ba e. Small magnets hold it in place.

12. Alternatively, Install the circular grille by pressing it into the circular ba e. Small magnets hold it in place.

13. The grilles may be painted to match the decor, before they are  tted onto the speaker ba e.

14. Use the supplied square or circular masks to help protect the speaker cones when painting.

Painting Masks in Place

30 QCI 3/QCI 8DC/PCI 8DC

31Quick Star t Guide

INSTALLATION

PCI 8DC

1. WARNI NG: To avoid potential damage to your loudspeaker, ensure that the ampli er is switched OFF prior to
connecting or disconnecting any cables.

2. The procedure below describes the installation of the speaker into a typical stud ceiling with drywall/
plasterboard.

3. Locate a suitable mounting position for the speaker, using a stud- nder. WARNING: Make sure that there are no
power lines, other cables, or plumbing such as water, sewer, gas lines in the chosen cutout location. Also make sure
that the location is far enough from the closest wall stud so that the clamping mechanism can operate without
interference.

4. Use the supplied cutout template as a guide, and cut out a circular hole in the drywall/plasterboard. Remove any
debris from the hole. Use a suitable adhesive in the local area inside the hole to seal the drywall to the studs and
joists, to prevent ceiling buzzing.

5. Run the speaker wire from your ampli er to this location, leaving enough slack to allow for the connection.

The PCI 8DC speaker frame is installed and wired, then the speaker assembly can be added later.

Cutout Installation Template

6. To use the square speaker grille,  rst move the mounting clamps out of the way as described in step 9 below.
Remove the backing from the strips of double-sided tape, and push the speaker frame into the
supplied square ba e.

Speake r Frame Squar e Ba e Speake r Frame with S quare Ba e

7. To use the circular speaker grille, push the speaker frame into the supplied circular ba e instead.

Speake r Frame Circu lar Ba e Spe aker Frame wi th Circul ar Ba e

32 QCI 3/QCI 8DC/PCI 8D C32

33Quick Star t Guide

8. Follow the information on the previous pages to connect the speaker wires from your power ampli er to the speaker
terminals on the speaker frame. Make sure to check that the polarity is correct and that the positive and negative
wires are securely and correctly connected. Secure the speaker wiring to the rear ring of the frame with tie-wraps to
prevent movement.

PCI 8DC Terminals

9. Carefully press the speaker frame into the cutout hole, making sure the speaker wires are not pinched. Reach
inside the frame and rotate the clamps outwards and pull the clamps forward on their rails to secure the speaker
frame to the drywall/plasterboard. To remove the speaker frame from the hole, press the release tabs and push
the clamps back.

Clamp

Release

Rail

10. Use the supplied square or circular masks to help protect the speaker cones when painting.

Painting Masks in Place

11. The grilles can be painted separately.

12. To mount the speaker into the mounted speaker frame, align the connecter on the speaker, with the
corresponding connector on the speaker frame.

Clamps (X4)

Alignment guide

34 QCI 3/QCI 8 DC/PCI 8DC

35Quick Start Guide

13. To lock the speaker in place in the frame, press down on the three lock buttons on the front of the speaker.
Note: After installation, if the square ba e does not press  at against the drywall, insert a ½ " screw in the oval

depression in each corner of the ba e, and hand-tighten until the ba e is  at against the drywall.

Insert extra screw here,
if required (see note)

Locks

Press in to Lock

Turn to unlock

14. To unlock the speaker from the speaker frame,  rst support the weight of the speaker, and rotate each lock with
a screwdriver less than half a turn.

15. The HF switch has three positions, with 0 dB being  at. Adjust as necessary to suit the room position
and acoustic conditions.

16. Install the square grille by pressing it into the square ba e. Small magnets hold it in place. Alternatively, install the
circular grille by pressing it into the circular ba e.

HF switch

0 dB +3 dB

+1. 5 dB

HF Switch

36 QCI 3/QCI 8DC/PCI 8DC

QCI 3 Dimensions QCI 8DC Dimensions

103
3,2
[0.1]
1,5
[0.1]

[4.1]

290 [11.4]

111 [4.4]

106 [4.2]

37Quick Star t Guide

Ø249 [9.8]

Ø134
[5.3]

Ø138

[5.5]

5,2
[0.2]
4,2
[0.2]

Ø145

[5.7]

Ø114

146
[5.7]
154

[6.1]

[4.5]

Ø117

[4.6]

130

[5.1]

SQUARE
BAFFLE

290 [11.4]

FRONT WITHOUT GRILLE FRONT WITH GRILLE SIDE BACK

114 [4.5]

Ø289 [11.4]

146

[5.7]

154

[6.1]

3,8
[0.2]
4,9
[0.2]

Dimensions are mm [inch] Dimensions are mm [inch]

CIRCULAR
BAFFLE

106 [4.2]

Ø249 [9.8]

38 QCI 3/QCI 8DC/PCI 8 DC

PCI 8DC Dimensions

39Quick Start G uide

SQUARE
BAFFLE

CIRCULAR
BAFFLE

141 [5.5]

290 [11.4]

290 [11.4]

FRONT WITHOUT GRILLE FRONT WITH GRILLE SIDE BACK

Ø289 [11.4]

135 [5.3]

143 [5.6]

135 [5.3]

Ø249 [9.8]

Ø249 [9.8]

Dimensions are mm [inch]

40 QCI 3/QCI 8DC/PCI 8DC

Speci cations

41Quick Star t Guide

41

QCI 3 QCI 8DC PCI 8DC

Perfo rmance

Frequency response (±3 dB) 110 Hz – 20 kHz 35 Hz – 20 kHz 50 Hz – 20 k Hz
Frequency response (-10 dB) 8 0 Hz – 20 kHz 25 H z – 20 kHz 30 Hz – 20 k Hz
Sensitivity (1 W @ 1m) 84 dB 87 dB
Directivity factor (Q) 6.4 averaged 1 kHz t o 10 kHz 6.8 averaged 1 kHz to 10 kHz 6.6 averaged 1 kHz to 10 kHz
Directivity index (DI) 8 averaged 1 kH z to 10 kHz 8.3 averaged 1 k Hz to 10 kHz 8.2 average d 1 kHz to 10 kHz

Power handl ing (IEC)

Average 40 W 80 W
Programme 80 W 160 W
Peak 160 W 320 W

Recommended
amplifier power

Nominal Impedance (Lo Z) 8 Ω

Rated maximum SPL
(1 m, Lo Z)

Average 100 dB 106 dB
Peak 106 dB 112 dB
Crossover point NA 1.6 kHz

Coverage angles

500 Hz 180° horizonta l, 180° verti cal 180° h orizontal, 145° vertical
1 kHz 180° horizont al, 180° vertical 117° horizontal, 117° vertica l 117° horizontal, 135° vertic al
2 kHz 135° horizont al, 135° vertic al 108° horiz ontal, 108° vertical 85° horizonta l, 99° vertical
4 kHz 66° horizo ntal, 66° vertical 121° horizonta l, 121° vertical 124° horizontal, 141° vertical

120 W @ 8 Ω 240 W @ 8 Ω

103 dB 109 dB

QCI 3 QCI 8DC PCI 8DC

Tran sdu cer s

Low frequency diameter/
material/type

High frequency diameter/
material/type

Physical

Back can —

Baffle Re ex loaded UL9 4 V-0 rated ABS
Grille Steel, with w eather resista nt coating
Clamping design Security toggle clamp
Connectors Phoenix Cont act terminal blo ck

Dimensions (HxWxD)

Bezel dimensions

Mounting depth 100 mm (4.0") 106 mm (4.2") 135 mm (5.3")
Hole cutout dimensions φ117 mm (4.6") φ250 mm (9.8")
Net weight 0.9 kg (1.98 lbs) 3.1 kg (6.8 lbs) 3.9 kg (8.6 lbs)
Packed quantity 21

Included accessories

Optional accessories PMK 3

85 mm (3") 219 mm (8") 210 mm (8")

— 25.4 mm (1")

Option 1 (BACK C AN S):

Steel, with p owder coating

Option 2 (BAC K CAN C1):

High densi ty expandable

polyst yrene (EPS)

154 x 154 x 105 mm

(6.1 x 6.1 x 4.1")

Circula r: φ145 mm (5.7")

Square: 154 x 154 mm (6.1 x 6.1")

Square gr ille, square ba e,

circular g rille, screw

290 x 290 x 114 mm

(11.4 x 11.4 x 4.5")

Circular : φ289 mm (11.4")

Square: 29 0 x 290 mm (11.4 x 11.4")

Square gr ille, square ba e, circular g rille, circular ba  e,

circular p aint mask, square p aint mask, cutout t emplate, screw

Option 1: BACK CAN S

Option 2: BACK C AN C1

Option 3: PMK 8

Option 1 (BACK C AN S):

Steel, with p owder coating

Option 2 (BAC K CAN C2):

High densi ty expandable

polyst yrene (EPS)

290 x 290 x 143 mm

(11.4 x 11.4 x 5.6")

Option 1: BACK CAN S

Option 2: BACK C AN C2

Option 3: PMK 8

42 Q CI 3/QCI 8DC/ PCI 8DC

Other important information

Important information

1. Register online. Pleaseregister

your new Music Tribe equipment
right after you purchase it by visiting
tannoy.com. Registeringyour purchase
using our simple online form helps us to
process your repair claims more quickly
and e ciently. Also, read the terms and
conditions of our warranty, ifapplicable.

2. Malfunction. Should your
Music Tribe Authorized Reseller not be
located in your vicinity, you may contact
the Music Tribe Authorized Ful ller for
your country listed under “Support” at
tannoy.com. Shouldyour country not be
listed, pleasecheck if your problem can be
dealt with by our “OnlineSupport” which
may also be found under “Support” at
tannoy.com. Alternatively, please submit
an online warranty claim at tannoy.com
BEFORE returning theproduct.

43Quick Start Guide