How it Works
Tannoy
Loading...
POWER V8
Operation Manual
28 pgs2.89 Mb0
Owner's Manual
28 pgs2.92 Mb0
Technical Specifications
10 pgs983.92 Kb0

Tannoy POWERV8 Technical Specifications

Download
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
T
he POWERV8 uses a high power handling 200mm (8.00”) version of Tannoy’s exclusive
p
oint source, constant directivity Dual Concentric™ drive unit technology. The robust
c
hassis construction, an LF cone of reinforced paper terminated with a twin roll cambric surround and a 25mm (1.00”) titanium domed, neodymium magnet equipped HF all contribute high power output with high sensitivity. With the HF mounted in the throat of the LF driver these two sources are coincidentally aligned into a single point source. This is a configuration, exclusive to the Dual, delivers a smooth and uniform frequency response over a wide area. The CAD designed Tulip WaveGuide™ combines 90 degrees conical dispersion for optimum coverage, forward gain and excellent acoustic impedance characteristics.
Delivering impressive levels of accuracy and performance, the POWERV8 is equipped with a highly efficient, flexible and reliable Class D power amplifier incorporating a switching power supply. The amplifier section and power supply were developed simultaneously and therefore optimally matched to minimise noise and enhance stability. The power module combines light, efficient and cool-running amplification, comprehensive driver protection and equalisation into a single compact unit. Clean, undistorted sound is delivered, even when driven at very high power levels. No cooling fans are required so the system runs quietly and is not prone to internal dust contamination.
The POWERV8 capitalises on the integrated design concept as every component part and their interaction is fully optimised. All signal processing functions have been precisely tailored; crossover frequencies and slopes, EQ, phase corrections and limiting. LED’s on the rear panel indicate signal presence, signal activity, and power. Signal input and audio link are via XLR, while the mains connector is a Neutrik locking Powercon type.
A switch on the rear panel of the full range models allows selection between Full Range or High Pass modes, with High Pass allowing a speaker to be mounted in close proximity to a boundary or simply to increase headroom. High pass mode also enables a simple top box and subwoofer combination to be created without the need for an external crossover. Two low pass setting options on the subwoofer amplifiers fully optimise integration with the full range units.
A compact solution for high quality music and speech reproduction in smaller venues, this versatile loudspeaker also has, due to effective acoustic matching to the other POWERV Series models, a wide range of applications in more space-restricted areas within larger installations, including nightclub infill, theme bars, performing arts centres, high quality public address, theme parks, leisure venues, audio visual, houses of worship and ‘dry hire’ rental.
Speaker placement flexibility is enhanced by the dispersion characteristics of the Dual driver; allowing either vertical or horizontal mounting without any compromise to sound quality or acoustic performance. Used as a low profile stage monitor, the conical coverage pattern gives the performer greater freedom of movement off axis than allowed by conventional horn loaded designs.
Available in black or white, the asymmetric cabinet profile is flexible and discreet in either fixed installations or on the road.
Product Description
• 200mm (8.00") Dual Concentric™ full range, point source, constan
•
Controlled conical dispersion for optimum coverage and forward gain
• Compact, versatile enclosures
• Rugged, highly efficient Class D amplification with universal power supply
• Integral carry handle
• Multiple flying points and accessory mounting hardware options
• Nightclub infill
• Theme bars
• Performing arts centres
• High quality public address
• Theme parks
• Leisure venues
• Audio visual
• Houses of worship
• ‘Dry hire’ rental
Features
Applications
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
TECHNICAL SPECIFICATIONS
System POWERV8
Construction
8001 4260 POWERV8 Black 2 8001 4261 POWERV8 White 2
PART NUMBER
PACKED QUANTITYCOLOURMODEL NAME
Ordering Information
S
ystem Type Full Range - Vented
F
requency Response (-3dB)
(
1)
8
0Hz - 30kHz
Full Range Mode
Frequency Range (-10dB)
(1)
67Hz - 40kHz
Full Range Mode
F
requency Response (-3dB)
(1)
1
20Hz - 30kHz
H
igh Pass Mode
Frequency Range (-10dB)
(1)
100Hz - 40kHz
High Pass Mode
Dispersion (-6dB) 90 degrees conical
D
river Complement 1 x 200mm (8.00”)
Dual Concentric™
C
rossover Passive 1.7kHz
Directivity Factor (Q) 6.8 averaged 1kHz to 10kHz
Directivity Index (DI) 7.9 averaged 1kHz to 10kHz
Rated Maximum SPL
(2)
Average 113dB Peak 119dB
Distortion 10% Full Power (8.9V) 2nd Harmonic 3rd Harmonic
250Hz 0.12% 0.15% 1kHz 0.23% 0.84% 10kHz 1.35% 0.16%
1% Full Power (2.8V) 2nd Harmonic 3rd Harmonic 250Hz 0.16% 0.14% 1kHz 0.09% 0.53% 10kHz 0.53% 0.17%
Crossover 1.7kHz Passive
PSU Specifications
Input Connector Locking Neutrik Powercon Voltage Selection Automatic
(115 / 230V, 45 - 65Hz)
Type
High current, high freq. switch-mode Efficiency >90% typical Input voltage
100v / 115v / 230v nominal +/-
10% Mains fuse External Fuse type T10AT Other features Automatic soft start
Enclosure
17 litre vented and internally braced 1
5mm (0.62”) birch plywood enclosure
15mm (0.62”) MDF front baffle
Finish Textured black or white paint with
custom colours on request P
owder coated steel grille with
reticulated foam behind
Connectors 1 x female XLR (input)
1
male XLR (link)
1 x Neutrik Powercon
C
ontrols & Indicators Level control
Power LED (Blue) S
ignal LED (Green) Limit LED (Red) Full range / High pass switch (110Hz) P
ower switch
F
ittings 4 x M10 inserts for flying hardware
2 x M10 yoke bracket inserts 1 x recessed carrying handle Blanking plate for optional VTH pole mount
Dimensions 388 x 280 x 275mm (H x W x D) 15.13 x 10.92 x 10.73”
NET Weight 10.5kg
23.1lbs
Electronics
Maximum signal input for clip Input attenuator at minimum: +18dBu
Input attenuator at maximum: +5dBu
Output noise -105dB unweighted, referenced to
maximum output (22kHz bandwidth)
Efficiency >90% typically
Damping Factor 400 ref 8 Ohms
Distortion <0.05% @ 1kHz -3dB output
(22kHz bandwidth)
Input Impedance 5.6kOhms unbalanced
11.2kOhms balanced
Protection systems Over Current
Excessive over current causes shutdown Temperature Limiters applied Brownout Automatic protection & recovery Mains Inrush current limiting Indicators 1x Limit LED
1x Signal LED
1x Power LED
Number of channels One
System Type Class D
Notes: (1) Average over stated bandwidth. Measured at 1 metre on axis. (2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
PERFORMANCE MEASUREMENTS
-40
-30
-20
-10
0
1
0
10 100 1000 10000 100000
-40
-30
-20
-10
0
10
10 100 1000 10000 100000
Full Range
Hi-Pass Filter
-40
-30
-20
-10
0
10
10 1001000 10000 100000
0 deg
10 deg
20deg
30deg
40deg
A
NECHOIC FREQUENCY RESPONSE
HIGH PASS FILTER ON / OFF
OFF AXIS RESPONSE
1
m on-axis frequency response
frequency (Hz)
frequency (Hz)
frequency (Hz)
Level (dB)
Level (dB)
Level (dB)
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
PERFORMANCE MEASUREMENTS
0
30
60
90
120
1
50
1
80
210
240
270
3
00
3
30
360
100 1000 10000
1
10
1
00
100 1000 10000
Q
BEAMWIDTH
DIRECTIVITY INDEX
B
eamwidth vs Frequency
frequency (Hz)
frequency (Hz)
Q vs Frequency
Q
Degrees
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
-
48
-36
-24
-12
0
0
30
60
90270
300
330
100 Hz 125 Hz 160 Hz 2
00 Hz
-48
-36
-24
-12
0
0
30
60
90270
300
330
250 Hz 315 Hz 400 Hz 500 Hz
-48
-36
-24
-12
0
0
3
0
60
90270
300
3
30
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
630 Hz 800 Hz 1 kHz
1.25 kHz
1.6 kHz 2 kHz
2.5 kHz
3.15 kHz
4 kHz 5 kHz
6.3 kHz 8 kHz
10 kHz
12.5 kHz 16 kHz 20 kHz
1.6 kHz 2 kHz
2.5 kHz
3.15 kHz
630 Hz 800 Hz 1 kHz
1.25 kHz
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
-48
-36
-24
-12
0
0
3
0
6
0
90270
3
00
3
30
-48
-36
-24
-12
0
0
3
0
6
0
90270
3
00
3
30
-48
-36
-24
-12
0
0
3
0
60
90270
300
3
30
-48
-36
-24
-12
0
0
3
0
60
90270
300
3
30
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
4 kHz 5 kHz
6.3 kHz 8 kHz
10 kHz
12.5 kHz 16 kHz 20 kHz
1.6 kHz 2 kHz
2.5 kHz
3.15 kHz
630 Hz 800 Hz 1 kHz
1.25 kHz
100 Hz 125 Hz 160 Hz 200 Hz
250 Hz 315 Hz 400 Hz 5
00 Hz
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
1.6 kHz 2 kHz
2.5 kHz
3.15 kHz
630 Hz 800 Hz 1 kHz
1.25 kHz
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
DIMENSIONAL SKETCHES
A
B
L
INK
LEVEL
5
0-60Hz
1
15-230V
5
00VAMax
MODE B
H
IGH PASS F
ILTER
F
ULL R
ANGE
MODE A
U
SUS
C
C
D
D
TT
S
S
I
I
L
L
E
E
C
MCM
E
E
T
T
K
K
R
R
E
E
T
T
N
N
I
I
F
USE
T
10AL250V
REPLACE ONLYWITH T
ANNOYPART 3461 0913
P
OWER
I
NPUT
1
0
MODE
0
-
SIGNAL
-
POWER
-
LIMIT
O
UVRIR
R
AIN OR MOISTURE
R
ISQUE DECHOC ELECTRIQUE-NEPAS
S
HOCK DO NOT EXPOSE THIS EQUIPMENT TO
T
OREDUCETHE RISK OF FIRE OR ELECTRIC
O
PERATIONSUBJECT TO CONDITIONSSTATED IN THE MANUAL.
C
ANADIAN INTERFERENCE-CAUSINGEQUIPMENT REGULATIONSAND
T
HIS CLASS D DIGITAL DEVICE MEETS ALL REQUIREMENTSOFTHE
C
OMPLIES WITHPART 15 OF THEFCC RULES.
C
AUTION
THIS EQUIPMENT MUST BE EARTHED
A
VIS:
W
ARNING
45°
30°
2
75.0
[10.73"]
145.0 [
5.66"]
280.0
[10.92"]
180.0 [7.02"]
145.0 [5.66"]
180.0 [7.02"]
3
88.0
[15.13"]
?120.0 [?4.68"]
296.0
[11.54"]
1
54.0
[6.01"]
145.0mm (
5.66”)
Ø
120.0mm
(Ø4.68”)
180.0mm (7.02”)
280.0mm
(
10.92”)
275.0mm (10.73”)
388mm (15.13”)
296.0mm (11.54”)
30° 45°
1
80.0mm (7.02”)
145mm
(5.66”)
154.0mm (6.01”)
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWER V8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
OPTIONAL ACCESSORIES & MOUNTING OPTIONS
POWERV8 Cluster x 2
POWERV8 Cluster x 3
VCB 2
VCB 4
V
CS
8001 2700 V8Y Black 1 8001 2710 V8Y White 1 8001 2740 VCB 2 Black 1 8001 2750 VCB 2 White 1 8001 2760 VCB 4 Black 1 8001 2770 VCB 4 White 1 8001 2820 VEB -1 8001 2830 VCS Black 1 8001 2840 VCS White 1 8001 2860 VTH Black 1 8001 2870 VTH White 1 8001 2850 VPC -1
PACKED QUANTITY
PART NUMBER
COLOUR
MODEL NAME
Ordering Information
V8Y
VTH
VEBVPC
POWERV8 and V8Y Bracket
POWERV8 Cluster x 4
POWERV8 Flying X 2
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
T
he loudspeaker shall consist of a 200mm (8.00”) full range, point source Dual Concentric™ transducer. The low and high frequency elements shall be
d
riven by an integrated single channel Class D amplifier through an internal passive crossover network operating at 1.7kHz. Performance of the loudspeaker
s
hall meet or exceed the following criteria: Frequency response measured at 1 metre on axis with swept sine wave shall be 80Hz to 30kHz (-3dB) in full range mode and 120Hz to 30kHz in high pass mode. Rated average SPL shall be 113dB (anechoic) on axis at 1 metre. The dispersion of the loudspeaker shall be 90 degrees conical (-6dB).
The enclosure shall be an optimally tuned 17 litre vented 15mm (0.62”) birch ply cabinet with 15mm (0.62”) MDF front baffle. Connectors shall be 1 x female XLR (input), 1 x male XLR (link) and 1 x Neutrik Powercon. The speaker shall be fitted with the following controls and indicators: level control, blue power LED, green signal LED, red limit LED, full range / high pass switch (110Hz) and a power switch. The enclosure shall be fitted with 4 x integral M10 inserts for flying hardware and 2 x M10 yoke bracket inserts. There shall be one carry recessed handle and a blanking plate for an optional pole mount adaptor.
The enclosure shall not exceed the following dimensions: 388 x 280 x 275mm or 15.13 x 10.92 x 10.72” (H x W x D).
T
he loudspeaker shall be the Tannoy… POWERV8.
Architectural specifications
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
POWERV8
Tannoy adopts a policy of continuous improvement and product specification is subject to change
POWERV8 data file // issue: 1.06 // 15.01.08
NOTES
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use