Pole Mount Adaptor
TANNOY Pole Mount Adaptors facilitate the installation
and mounting of speaker s onto beams, poles and posts,
providing robust support in both indoor and outdo or
applications. Pole Mount Adaptors can be used with
standard TANNOY yoke brackets or K-Ball brackets.
Pole Mount Adaptors are available in black and w hite or they
can be painted to matc h the surrounding space. The adapter
will x to poles ranging from 77 to 228 mm diameter.
Installation Using Yoke Brackets
• • Use the xings supplied with your speaker to x the
empty yoke bracket to the un-mounted pole brac ket
adaptor. (Di erent speaker models require di erent
numbers of xing screws. Refer to your speakers’
documentation for details.)
• • Fix the pole mount bracket adaptor to the pole using
the strapping provided. The bracket can be mounted
in portrait or landscape orientations.
• • See the main product QSG for f urther speci c
information ab out proper connection and xings for
your speaker.
Installation Using K-Ball
Brackets
• • Pass the speaker wire through the un- xed pole
mount adaptor plate.
• • Connect the speaker wires to the connector block
in the rear of the K-Ball bracket. (See the K-Ball
documentation for speci c connection instruc tions.)
• • O er the K-Ball bracket up to the adaptor plate
(if outdoors, with the foam gasket squeezed in
between, if outdoors).
•
• Fix the K-Ball
•
•
•
(use the xings supplied with the K-Ball bracket).
• Fix the pole mount bracket adaptor to the pole using
the provided s trapping. The bracket can be mounted
in portrait or landscape orientations.
• See the main product QSG for f urther speci c
information ab out proper connection and xings for
your speaker.
• Please refer to the main product QSG for further
information about speci c speaker models.
bracket to the pole mount adaptor
MUSIC Group accepts no lia bility for any loss which may be
su er ed by any person who relies eith er wholly or in part upon
any descripti on, photograph, or statement cont ained herein.
Technical speci cations, appearances and other i nformation
are subject to c hange without notice. All trademar ks are the
proper ty of their respecti ve owners. MIDA S, KLARK TEKNIK ,
LAB GRUPPEN, L AKE, TANNOY, TURBOSOUND, TC ELE CTRONIC,
TC HEL ICON, BEH RINGER , BUGERA and DDA are trademarks or
registere d trademarks of MUSIC Group IP Ltd. © MUSIC G roup IP
Ltd. 2016 All rights reser ved.
For the applicab le warranty terms and conditions an d additional
information r egarding MUSIC Group’s Limited Warranty, please
see complete details online at music-group.com/warranty.
Loading...