Tannoy PCI 7DC RB Quick Start Guide

Quick Start Guide

PCI 7DC RB
Premium 7" Dual Concentric In-Ceiling Loudspeaker for Installation Applications

BACK CAN PCI 7DC RB
Back Can Kit for PCI 7DC RB In-Ceiling Loudspeakers

2 PCI 7DC RB Quick Start Guide 3

Instrucciones de
seguridad

NEGACIÓN LEGAL

GARANTÍA LIMITADA

Important Safety
Instructions

LEGAL DISCLAIMER

LIMITED WARRANTY

Terminals marked with this symbol carry
electrical current of sucient magnitude

to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼" TS or twist-locking plugs pre-installed. Allother
installation or modication should be performed only
by qualiedpersonnel.

This symbol, wherever it appears,

alertsyou to the presence of uninsulated

dangerous voltage inside the
enclosure-voltage that may be sucient to constitute a
risk ofshock.

This symbol, wherever it appears,

alertsyou to important operating and

maintenance instructions in the
accompanying literature. Please read the manual.

Caution

To reduce the risk of electric shock, donot

remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
qualied personnel.

Caution

To reduce the risk of re or electric shock,

do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects lled with liquids,
suchas vases, shall be placed on the apparatus.

Caution

These service instructions are for use

by qualied service personnel only.
Toreduce the risk of electric shock do not perform any
servicing other than that contained in the operation
instructions. Repairs have to be performed by qualied
servicepersonnel.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.

11. Use only attachments/accessories specied by
themanufacturer.

12. Use only with the
cart, stand, tripod, bracket,
or table specied by the
manufacturer, orsold with
the apparatus. When a cart
is used, use caution when
moving the cart/apparatus
combination to avoid

injury from tip-over.

13. Unplug this apparatus during lightning storms or
when unused for long periods of time.

14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
beendropped.

15. The apparatus shall be connected to a MAINS socket
outlet with a protective earthing connection.

16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
remain readily operable.

17. Correct disposal of this
product: This symbol indicates that
this product must not be disposed
of with household waste,
according to the WEEE Directive
(2012/19/EU) and your national

law. This product should be taken
to a collection center licensed for the recycling of waste
electrical and electronic equipment (EEE). The
mishandling of this type of waste could have a possible
negative impact on the environment and human health
due to potentially hazardous substances that are generally
associated with EEE. At the same time, your cooperation
in the correct disposal of this product will contribute to
the ecient use of natural resources. For more
information about where you can take your waste
equipment for recycling, please contact your local city
oce, or your household waste collection service.

18. Do not install in a conned space, such as a book
case or similar unit.

19. Do not place naked ame sources, such as lighted
candles, on the apparatus.

20. Please keep the environmental aspects of battery
disposal in mind. Batteries must be disposed-of at a
battery collection point.

21. Use this apparatus in tropical and/or
moderate climates.

Music Tribe accepts no liability for any loss which
may be suered by any person who relies either
wholly or in part upon any description, photograph,
or statement contained herein. Technical specications,
appearances and other information are subject to
change without notice. All trademarks are the property
of their respective owners. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera and Coolaudio are
trademarks or registered trademarks of Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 All rights reserved.

For the applicable warranty terms and conditions
and additional information regarding Music Tribe’s
Limited Warranty, please see complete details online at
musictribe.com/warranty.

Zhongshan Eurotec Electronics Limited

No. 10 Wanmei Road, South China Modern Chinese
Medicine Park, Nanlang Town, 528451, Zhongshan City,
Guangdong Province, China

Las terminales marcadas con este símbolo
transportan corriente eléctrica de

magnitud suciente como para constituir
un riesgo de descarga eléctrica. Utilice solo cables de
altavoz profesionales y de alta calidad con conectores
TS de 6,3 mm o de bayoneta prejados. Cualquier otra
instalación o modicación debe ser realizada únicamente
por un técnico cualicado.

Este símbolo, siempre que aparece,

leadvierte de la presencia de voltaje

peligroso sin aislar dentro de la caja;
estevoltaje puede ser suciente para constituir un riesgo
dedescarga.

Este símbolo, siempre que aparece,

leadvierte sobre instrucciones operativas

y de mantenimiento que aparecen en la
documentación adjunta. Por favor, lea el manual.

Atención

Para reducir el riesgo de descarga

eléctrica, no quite la tapa (o la parte
posterior). No hay piezas en el interior del equipo que
puedan ser reparadas por el usuario. Si es necesario,
póngase en contacto con personal cualicado.

Atención

Para reducir el riesgo de incendio o

descarga eléctrica, no exponga este
aparato a la lluvia, humedad o alguna otra fuente que
pueda salpicar o derramar algún líquido sobre el aparato.
Nocoloque ningún tipo de recipiente para líquidos sobre
el aparato.

Atención

Las instrucciones de servicio deben

llevarlas a cabo exclusivamente personal
cualicado. Para evitar el riesgo de una descarga eléctrica,
no realice reparaciones que no se encuentren descritas
en el manual de operaciones. Lasreparaciones deben ser
realizadas exclusivamente por personalcualicado.

1. Lea las instrucciones.

2. Conserve estas instrucciones.

3. Preste atención a todas las advertencias.

4. Siga todas las instrucciones.

5. No use este aparato cerca del agua.

6. Limpie este aparato con un paño seco.

7. No bloquee las aberturas de ventilación. Instale el

equipo de acuerdo con las instrucciones del fabricante.

8. No instale este equipo cerca de fuentes de calor
tales como radiadores, acumuladores de calor, estufas u
otros aparatos (incluyendo amplicadores) que puedan
producir calor.

9. No elimine o deshabilite nunca la conexión a tierra
del aparato o del cable de alimentación de corriente.
Unenchufe polarizado tiene dos polos, uno de los cuales
tiene un contacto más ancho que el otro. Una clavija con
puesta a tierra dispone de tres contactos: dos polos y la
puesta a tierra. El contacto ancho y el tercer contacto,
respectivamente, son los que garantizan una mayor
seguridad. Si el enchufe suministrado con el equipo no
concuerda con la toma de corriente, consulte con un
electricista para cambiar la toma de corriente obsoleta.

10. Coloque el cable de suministro de energía de manera
que no pueda ser pisado y que esté protegido de objetos
alados. Asegúrese de que el cable de suministro de
energía esté protegido, especialmente en la zona de la
clavija y en el punto donde sale del aparato.

11. Use únicamente los dispositivos o accesorios
especicados por el fabricante.

12. Use únicamente la
carretilla, plataforma,
trípode, soporte o mesa
especicados por el
fabricante o suministrados
junto con el equipo.
Altransportar el equipo,
tenga cuidado para evitar

daños y caídas al tropezar con algún obstáculo.

13. Desenchufe el equipo durante tormentas o si no va a
utilizarlo durante un periodo largo.

14. Confíe las reparaciones únicamente a servicios
técnicos cualicados. La unidad requiere mantenimiento
siempre que haya sufrido algún daño, si el cable de
suministro de energía o el enchufe presentaran daños,
sehubiera derramado un líquido o hubieran caído objetos
dentro del equipo, si el aparato hubiera estado expuesto
a la humedad o la lluvia, si ha dejado de funcionar de
manera normal o si ha sufrido algún golpe o caída.

15. Al conectar la unidad a la toma de corriente eléctrica
asegúrese de que la conexión disponga de una unión
atierra.

16. Si el enchufe o conector de red sirve como único
medio de desconexión, éste debe ser accesiblefácilmente.

17. Cómo debe deshacerse de
este aparato: Este símbolo indica
que este aparato no debe ser
tratado como basura orgánica,
según lo indicado en la Directiva
WEEE (2012/19/EU) y a las

normativas aplicables en su país.
En lugar de ello deberá llevarlo al punto limpio más
cercano para el reciclaje de sus elementos eléctricos/
electrónicos (EEE). Al hacer esto estará ayudando a
prevenir las posibles consecuencias negativas para el
medio ambiente y la salud que podrían ser provocadas por
una gestión inadecuada de este tipo de aparatos. Además,
el reciclaje de materiales ayudará a conservar los recursos
naturales. Para más información acerca del reciclaje de
este aparato, póngase en contacto con el Ayuntamiento
de su ciudad o con el punto limpio local.

18. No instale esta unidad en un espacio muy reducido,
tal como encastrada en una librería o similar.

19. No coloque objetos con llama, como una vela
encendida, sobre este aparato.

20. Tenga presentes todas las advertencias relativas
al reciclaje y correcta eliminación de las pilas. Las pilas
deben ser siempre eliminadas en un punto limpio y nunca
con el resto de la basura orgánica.

21. Use este aparato en rangos de temperatura
moderados y/o tropicales.

Music Tribe no admite ningún tipo de responsabilidad
por cualquier daño o pérdida que pudiera sufrir
cualquier persona por conar total o parcialmente en
la descripciones, fotografías o armaciones contenidas
en este documento. Las especicaciones técnicas,
imágenes y otras informaciones contenidas en este
documento están sujetas a modicaciones sin previo
aviso. Todas las marcas comerciales que aparecen
aquí son propiedad de sus respectivos dueños. Midas,
Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer, Bugera y Coolaudio
son marcas comerciales o marcas registradas de
Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2019 Reservados todos los derechos.

Si quiere conocer los detalles y condiciones aplicables
de la garantía así como información adicional sobre la
Garantía limitada de Music Tribe, consulte online toda la
información en la web musictribe.com/warranty.

4 PCI 7DC RB Quick Start Guide 5

Consignes de sécurité

DÉNI LÉGAL

GARANTIE LIMITÉE

Wichtige
Sicherheitshinweise

HAFTUNGSAUSSCHLUSS

BESCHRÄNKTE GARANTIE

Les points repérés par ce symbole portent
une tension électrique susante pour

constituer un risque d’électrocution.
Utilisez uniquement des câbles d’enceintes professionnels
de haute qualité avec ches Jack mono 6,35 mm ou ches
à verrouillages déjà installées. Touteautre installation ou
modication doit être eectuée uniquement par un
personnel qualié.

Ce symbole avertit de la présence d’une

tension dangereuse et non isolée à

l’intérieur de l’appareil - elle peut
provoquer des chocs électriques.

Attention

Ce symbol signale les consignes

d’utilisation et d’entre ! Tien importantes
dans la documentation fournie. Lisez les consignes de
sécurité du manuel d’utilisation de l’appareil.

Attention

Pour éviter tout risque de choc électrique,

ne pas ouvrir le capot de l’appareil ni
démonter le panneau arrière. L’intérieur de l’appareil
ne possède aucun élément réparable par l’utilisateur.
Laissertoute réparation à un professionnel qualié.

Attention

Pour réduire les risques de feu et de choc

électrique, n’exposez pas cet appareil à la
pluie, à la moisissure, aux gouttes ou aux éclaboussures.
Ne posez pas de récipient contenant un liquide sur
l’appareil (un vase par exemple).

Attention

Ces consignes de sécurité et d’entretien

sont destinées à un personnel qualié.
Pouréviter tout risque de choc électrique, n’eectuez
aucune réparation sur l’appareil qui ne soit décrite par le
manuel d’utilisation. Les éventuelles réparations doivent
être eectuées uniquement par un technicien spécialisé.

1. Lisez ces consignes.

2. Conservez ces consignes.

3. Respectez tous les avertissements.

4. Respectez toutes les consignes d’utilisation.

5. N’utilisez jamais l’appareil à proximité d’un liquide.

6. Nettoyez l’appareil avec un chion sec.

7. Veillez à ne pas empêcher la bonne ventilation de

l’appareil via ses ouïes de ventilation. Respectezles
consignes du fabricant concernant l’installation
del’appareil.

8. Ne placez pas l’appareil à proximité d’une source
de chaleur telle qu’un chauage, une cuisinière ou tout
appareil dégageant de la chaleur (y compris un ampli
depuissance).

9. Ne supprimez jamais la sécurité des prises bipolaires
ou des prises terre. Les prises bipolaires possèdent deux
contacts de largeur diérente. Leplus large est le contact
de sécurité. Les prises terre possèdent deux contacts plus
une mise à la terre servant de sécurité. Si la prise du bloc
d’alimentation ou du cordon d’ali-mentation fourni ne
correspond pas à celles de votre installation électrique,
faites appel à un électricien pour eectuer le changement
de prise.

10. Installez le cordon d’alimentation de telle façon
que personne ne puisse marcher dessus et qu’il soit
protégé d’arêtes coupantes. Assurez-vous que le cordon
d’alimentation est sufsamment protégé, notamment au
niveau de sa prise électrique et de l’endroit où il est relié à
l’appareil; cela est également valable pour une éventuelle
rallonge électrique.

11. Utilisez exclusivement des accessoires et des
appareils supplémentaires recommandés par lefabricant.

12. Utilisez
exclusivement des
chariots, des diables,
desprésentoirs, despieds
et des surfaces de
travail recommandés
par le fabricant ou

livrés avec le produit.
Déplacezprécautionneusement tout chariot ou diable
chargé pour éviter d’éventuelles blessures en cas dechute.

13. Débranchez l’appareil de la tension secteur en cas
d’orage ou si l’appareil reste inutilisé pendant une longue
période de temps.

14. Les travaux d’entretien de l’appareil doivent
être eectués uniquement par du personnel qualié.
Aucunentretien n’est nécessaire sauf si l’appareil est
endommagé de quelque façon que ce soit (dommagessur
le cordon d’alimentation ou la prise par exemple), siun
liquide ou un objet a pénétré à l’intérieur du châssis,
si l’appareil a été exposé à la pluie ou à l’humidité, s’il ne
fonctionne pas correctement ou à la suite d’une chute.

15. L’appareil doit être connecté à une prise secteur
dotée d’une protection par mise à la terre.

16. La prise électrique ou la prise IEC de tout appareil
dénué de bouton marche/arrêt doit rester accessible
enpermanence.

17. Mise au rebut appropriée de
ce produit: Ce symbole indique
qu’en accord avec la directive DEEE
(2012/19/EU) et les lois en vigueur
dans votre pays, ce produit ne doit
pas être jeté avec les déchets

ménagers. Ce produit doit être
déposé dans un point de collecte agréé pour le recyclage
des déchets d’équipements électriques et électroniques
(EEE). Une mauvaise manipulation de ce type de déchets
pourrait avoir un impact négatif sur l’environnement et la
santé à cause des substances potentiellement
dangereuses généralement associées à ces équipements.
En même temps, votre coopération dans la mise au rebut
de ce produit contribuera à l’utilisation ecace des
ressources naturelles. Pour plus d’informations sur
l’endroit où vous pouvez déposer vos déchets

d’équipements pour le recyclage, veuillez contacter votre
mairie ou votre centre local de collecte des déchets.

18. N’installez pas l’appareil dans un espace conné tel
qu’une bibliothèque ou meuble similaire.

19. Ne placez jamais d’objets enammés, tels que des
bougies allumées, sur l’appareil.

20. Gardez à l’esprit l’impact environnemental lorsque
vous mettez des piles au rebus. Les piles usées doivent
être déposées dans un point de collecte adapté.

21. Utilisez l’appareil dans un climat tropical
et/ou modéré.

Music Tribe ne peut être tenu pour responsable pour
toute perte pouvant être subie par toute personne
se ant en partie ou en totalité à toute description,
photographie ou armation contenue dans ce
document. Les caractéristiques, l’apparence et d’autres
informations peuvent faire l’objet de modications
sans notication. Toutes les marques appartiennent
à leurs propriétaires respectifs. Midas, Klark Teknik,
Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic,
TC Helicon, Behringer, Bugera et Coolaudio sont
des marques ou marques déposées de Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 Tous droits réservés.

Pour connaître les termes et conditions de garantie
applicables, ainsi que les informations supplémentaires
et détaillées sur la Garantie Limitée de Music Tribe,
consultez le site Internet musictribe.com/warranty.

Vorsicht

Die mit dem Symbol markierten

Anschlüsse führen so viel Spannung,
dassdie Gefahr eines Stromschlags besteht.
Verwenden Sie nur hochwertige, professionelle
Lautsprecherkabel mit vorinstallierten 6,35 mm
MONO-Klinkensteckern oder Lautsprecherstecker
mit Drehverriegelung. Alle anderen Installationen
oder Modikationen sollten nur von qualiziertem
Fachpersonal ausgeführt werden.

Achtung

Um eine Gefährdung durch Stromschlag

auszuschließen, darf die Geräteabdeckung
bzw. Geräterückwand nicht abgenommen werden.
ImInnern des Geräts benden sich keine vom Benutzer
reparierbaren Teile. Reparaturarbeiten dürfen nur von
qualiziertem Personal ausgeführt werden.

Achtung

Um eine Gefährdung durch Feuer bzw.

Stromschlag auszuschließen, darf dieses
Gerät weder Regen oder Feuchtigkeit ausgesetzt werden
noch sollten Spritzwasser oder tropfende Flüssigkeiten
in das Gerät gelangen können. Stellen Sie keine mit
Flüssigkeit gefüllten Gegenstände, wie z. B. Vasen,
aufdasGerät.

Achtung

Die Service-Hinweise sind nur durch

qualiziertes Personal zu befolgen.
Umeine Gefährdung durch Stromschlag zu vermeiden,
führen Sie bitte keinerlei Reparaturen an dem Gerät
durch, die nicht in der Bedienungsanleitung beschrieben
sind. Reparaturen sind nur von qualiziertem
Fachpersonaldurchzuführen.

1. Lesen Sie diese Hinweise.

2. Bewahren Sie diese Hinweise auf.

3. Beachten Sie alle Warnhinweise.

4. Befolgen Sie alle Bedienungshinweise.

5. Betreiben Sie das Gerät nicht in der Nähe vonWasser.

6. Reinigen Sie das Gerät mit einem trockenen Tuch.

7. Blockieren Sie nicht die Belüftungsschlitze. Beachten

Sie beim Einbau des Gerätes die Herstellerhinweise.

8. Stellen Sie das Gerät nicht in der Nähe von
Wärmequellen auf. Solche Wärmequellen sind z. B.
Heizkörper, Herde oder andere Wärme erzeugende Geräte
(auch Verstärker).

9. Entfernen Sie in keinem Fall die
Sicherheitsvorrichtung von Zweipol- oder geerdeten
Steckern. Ein Zweipolstecker hat zwei unterschiedlich
breite Steckkontakte. Ein geerdeter Stecker hat zwei
Steckkontakte und einen dritten Erdungskontakt.
Derbreitere Steckkontakt oder der zusätzliche

Erdungskontakt dient Ihrer Sicherheit. Falls das
mitgelieferte Steckerformat nicht zu Ihrer Steckdose
passt, wenden Sie sich bitte an einen Elektriker, damit die
Steckdose entsprechend ausgetauscht wird.

10. Verlegen Sie das Netzkabel so, dass es vor
Tritten und scharfen Kanten geschützt ist und nicht
beschädigt werden kann. Achten Sie bitte insbesondere
im Bereich der Stecker, Verlängerungskabel und an
der Stelle, an der das Netzkabel das Gerät verlässt,
aufausreichendenSchutz.

11. Das Gerät muss jederzeit mit intaktem Schutzleiter
an das Stromnetz angeschlossen sein.

12. Sollte der Hauptnetzstecker oder eine
Gerätesteckdose die Funktionseinheit zum Abschalten
sein, muss diese immer zugänglich sein.

13. Verwenden Sie nur Zusatzgeräte/Zubehörteile,
dielaut Hersteller geeignet sind.

14. Verwenden
Sie nur Wagen,
Standvorrichtungen,
Stative, Halter oder Tische,
die vom Hersteller benannt
oder im Lieferumfang
des Geräts enthalten

sind. Falls Sie einen
Wagen benutzen, seien Sie vorsichtig beim Bewegen
der Wagen- Gerätkombination, umVerletzungen durch
Stolpern zuvermeiden.

15. Ziehen Sie den Netzstecker bei Gewitter oder wenn
Sie das Gerät längere Zeit nicht benutzen.

16. Lassen Sie alle Wartungsarbeiten nur von
qualiziertem Service-Personal ausführen. EineWartung
ist notwendig, wenn das Gerät in irgendeiner Weise
beschädigt wurde (z. B. Beschädigung des Netzkabels oder
Steckers), Gegenstände oder Flüssigkeit in das Geräteinnere
gelangt sind, das Gerät Regen oder Feuchtigkeit ausgesetzt
wurde, das Gerät nicht ordnungsgemäß funktioniert oder
auf den Boden gefallen ist.

17. Korrekte Entsorgung dieses
Produkts: Dieses Symbol weist
darauf hin, das Produkt
entsprechend der WEEE Direktive
(2012/19/EU) und der jeweiligen
nationalen Gesetze nicht

zusammen mit Ihren
Haushaltsabfällen zu entsorgen. DiesesProdukt sollte bei
einer autorisierten Sammelstelle für Recycling elektrischer
und elektronischer Geräte (EEE) abgegeben werden.
Wegen bedenklicher Substanzen, diegenerell mit
elektrischen und elektronischen Geräten in Verbindung
stehen, könnte eine unsachgemäße Behandlung dieser
Abfallart eine negative Auswirkung auf Umwelt und
Gesundheit haben. Gleichzeitig gewährleistet Ihr Beitrag
zur richtigen Entsorgung dieses Produkts die eektive
Nutzung natürlicher Ressourcen. Fürweitere
Informationen zur Entsorgung Ihrer Geräte bei einer
Recycling-Stelle nehmen Sie bitte Kontakt zum
zuständigen städtischen Büro, Entsorgungsamt oder zu
Ihrem Haushaltsabfallentsorgerauf.

18. Installieren Sie das Gerät nicht in einer beengten
Umgebung, zum Beispiel Bücherregal oder ähnliches.

19. Stellen Sie keine Gegenstände mit oenen
Flammen, etwa brennende Kerzen, auf das Gerät.

20. Beachten Sie bei der Entsorgung von Batterien
den Umweltschutz-Aspekt. Batterien müssen bei einer
Batterie-Sammelstelle entsorgt werden.

21. Verwenden Sie das Gerät in tropischen und/oder
gemäßigten Klimazonen.

Music Tribe übernimmt keine Haftung für Verluste,
die Personen entstanden sind, die sich ganz oder
teilweise auf hier enthaltene Beschreibungen,
Fotos oder Aussagen verlassen haben. Technische Daten,
Erscheinungsbild und andere Informationen können
ohne vorherige Ankündigung geändert werden.
Alle Warenzeichen sind Eigentum der jeweiligen
Inhaber. Midas, Klark Teknik, Lab Gruppen, Lake,
Tannoy, Turbosound, TC Electronic, TC Helicon,
Behringer, Bugera und Coolaudio sind Warenzeichen
oder eingetragene Warenzeichen der Music Tribe
Global Brands Ltd. © Music Tribe Global Brands Ltd.
2019 Alle Rechte vorbehalten.

Die geltenden Garantiebedingungen und zusätzliche
Informationen bezüglich der von Music Tribe gewährten
beschränkten Garantie nden Sie online unter
musictribe.com/warranty.

6 PCI 7DC RB Quick Start Guide 7

Instruções de Segurança
Importantes

LEGAL RENUNCIANTE

GARANTIA LIMITADA

Introduction

Thank you for purchasing this TANNOY premium Dual Concentric Loudspeaker for Installation Applications. Tannoy in-ceiling speaker systems are monitor-quality
speaker systems based on the company's expertise in the manufacture of premium quality cabinet loudspeakers and studio monitors. Exclusive drive unit designs
and wide bandwidth technology ensure that these loudspeakers deliver the performance that is essential for applications such as multi-room distributed audio
installations, home theatre systems and discrete audio systems, as well as in the many other applications where space is at a premium but ultimate sound quality
is still paramount. The speaker construction is based around a rigid moulded ABS baff le with excellent structural integrity; this, when combined with the secure
polycarbonate clamp mounting system (patent applied for: 0316892.9), ensures a performance-enhancing rigid acoustic coupling with the wall surface, and an
immensely stable platform for the drivers to deliver optimum performance. Complementing any style of decor, the perforated metal grille and low profile mounting
frame can be painted to blend in seamlessly with the domestic environment. The result is a system offering audiophile quality sound with minimal invasion of the
living space.

Unpacking

Every TANNOY product is carefully inspec ted before shipment. After unpacking, please inspect your product to ensure no damage has occurred in transit. In the
unlikely event of damage, please notify your dealer and retain all shipping materials as your dealer may require return shipment.

Safety Notices

TANNOY will not be held responsible for any damages caused by the improper installation of these loudspeakers.

Aviso!

Terminais marcados com o símbolo

carregam corrente elétrica de magnitude
suciente para constituir um risco de choque elétrico.
Use apenas cabos de alto-falantes de alta qualidade
com plugues TS de ¼" ou plugues com trava de torção
pré-instalados. Todas as outras instalações e modicações
devem ser efetuadas por pessoasqualicadas.

Este símbolo, onde quer que o encontre,

alerta-o para a leitura das instruções de

manuseamento que acompanham o
equipamento. Por favor leia o manual de instruções.

Atenção

De forma a diminuir o risco de choque

eléctrico, não remover a cobertura
(ouasecção de trás). Não existem peças substituíveis por
parte do utilizador no seu interior. Para esse efeito recorrer
a um técnico qualicado.

Atenção

Para reduzir o risco de incêndios ou

choques eléctricos o aparelho não deve ser
exposto à chuva nem à humidade. Além disso, não deve
ser sujeito a salpicos, nem devem ser colocados em cima
do aparelho objectos contendo líquidos, tais como jarras.

Atenção

Estas instruções de operação devem ser

utilizadas, em exclusivo, por técnicos de
assistência qualicados. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação, salvo se possuir as
quali-cações necessárias. Para evitar choques eléctricos
não proceda a reparações ou intervenções, que não as
indicadas nas instruções de operação. Só o deverá fazer se
possuir as qualicações necessárias.

1. Leia estas instruções.

2. Guarde estas instruções.

3. Preste atenção a todos os avisos.

4. Siga todas as instruções.

5. Não utilize este dispositivo perto de água.

6. Limpe apenas com um pano seco.

7. Não obstrua as entradas de ventilação. Instale de

acordo com as instruções do fabricante.

8. Não instale perto de quaisquer fontes de calor
tais como radiadores, bocas de ar quente, fogões de
sala ou outros aparelhos (incluindo amplicadores)
que produzam calor.

9. Não anule o objectivo de segurança das chas
polarizadas ou do tipo de ligação à terra. Uma cha
polarizada dispõe de duas palhetas sendo uma mais larga
do que a outra. Uma cha do tipo ligação à terra dispõe

de duas palhetas e um terceiro dente de ligação à terra.
A palheta larga ou o terceiro dente são fornecidos para
sua segurança. Se a cha fornecida não encaixar na sua
tomada, consulte um electricista para a substituição da
tomada obsoleta.

10. Proteja o cabo de alimentação de pisadelas ou
apertos, especialmente nas chas, extensões, e no local
de saída da unidade. Certique-se de que o cabo eléctrico
está protegido. Verique particularmente nas chas, nos
receptáculos e no ponto em que o cabo sai doaparelho.

11. O aparelho tem de estar sempre conectado à rede
eléctrica com o condutor de protecção intacto.

12. Se utilizar uma cha de rede principal ou uma
tomada de aparelhos para desligar a unidade de
funcionamento, esta deve estar sempre acessível.

13. Utilize apenas ligações/acessórios especicados
pelofabricante.

14. Utilize apenas com
o carrinho, estrutura,
tripé, suporte, ou mesa
especicados pelo
fabricante ou vendidos
com o dispositivo.
Quandoutilizar um

carrinho, tenha cuidado ao
mover o conjunto carrinho/dispositivo para evitar danos
provocados pela terpidação.

15. Desligue este dispositivo durante as trovoadas
ou quando não for utilizado durante longos períodos
detempo.

16. Qualquer tipo de reparação deve ser sempre
efectuado por pessoal qualicado. É necessária uma
reparação sempre que a unidade tiver sido de alguma
forma danicada, como por exemplo: no caso do cabo
de alimentação ou cha se encontrarem danicados;
naeventualidade de líquido ter sido derramado ou
objectos terem caído para dentro do dispositivo; no caso
da unidade ter estado exposta à chuva ou à humidade;
seesta não funcionar normalmente, ou se tiver caído.

17. Correcta eliminação deste
produto: este símbolo indica que
o produto não deve ser eliminado
juntamente com os resíduos
domésticos, segundo a Directiva
REEE (2012/19/EU) e a legislação

nacional. Este produto deverá
ser levado para um centro de recolha licenciado para a
reciclagem de resíduos de equipamentos eléctricos e
electrónicos (EEE). O tratamento incorrecto deste tipo
de resíduos pode ter um eventual impacto negativo
no ambiente e na saúde humana devido a substâncias
potencialmente perigosas que estão geralmente
associadas aos EEE. Ao mesmo tempo, a sua colaboração
para a eliminação correcta deste produto irá contribuir
para a utilização eciente dos recursos naturais. Paramais
informação acerca dos locais onde poderá deixar o seu
equipamento usado para reciclagem, é favor contactar
os serviços municipais locais, a entidade de gestão de
resíduos ou os serviços de recolha de resíduosdomésticos.

18. Não instale em lugares connados, tais como
estantes ou unidades similares.

19. Não coloque fontes de chama, tais como velas
acesas, sobre o aparelho.

20. Favor, obedecer os aspectos ambientais de descarte
de bateria. Baterias devem ser descartadas em um ponto
de coletas de baterias.

21. Use este aparelho em climas tropicais
e/ou moderados.

O Music Tribe não se responsabiliza por perda alguma
que possa ser sofrida por qualquer pessoa que dependa,
seja de maneira completa ou parcial, de qualquer
descrição, fotograa, ou declaração aqui contidas.
Dados técnicos, aparências e outras informações estão
sujeitas a modicações sem aviso prévio. Todas as
marcas são propriedade de seus respectivos donos.
Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy,
Turbosound, TC Electronic, TC Helicon, Behringer,
Bugera e Coolaudio são marcas ou marcas registradas
do Music Tribe Global Brands Ltd. © Music Tribe Global
Brands Ltd. 2019 Todos direitos reservados.

Para obter os termos de garantia aplicáveis e condições e
informações adicionais a respeito da garantia limitada do
Music Tribe, favor vericar detalhes na íntegra através do
website musictribe.com/warranty.

8 PCI 7DC RB Quick Start Guide 9

Product Feature Identi cation

PCI 7DC RB

Loudspeaker Assembly

Back Can Assembly

Grille

Paint Mask

Mounting Screws (X4)

Port

Rotatable
Baffle

Clamp Screws
(X4) for rotatable
baffle

HF Switch Dual Concentric Driver

Wood
Construction

Crossover PCB*

Note that this view may

*

not represent the latest
production version.

Connector for
wiring to backcan

Cover

Aperture

Connector

Mounting Brackets
(X4)

Cable Entry for
Speaker Wire

10 PCI 7DC RB Quick Start Guide 11

PCI 7DC RB Installation Guide

PCI 7DC RB Back Can Installation

WARNIN G: This procedure requires the use of an assistant, and the use of personal protection equipment, such as safety glasses and gloves.

WARNIN G: To avoid potential damage to your loudspeaker, ensure that the power ampli er is switched OFF prior to connecting or disconnecting any cables.

WARNIN G: Make sure that there are no power lines, other cables, or plumbing such as water, sewer, gas lines in the chosen location.

The procedure below describes the installation of the back can into a typical 2" x 8" joist ceiling with 16" centers, with drywall/plasterboard not yet installed.

After the back can and dr ywall is installed, the PCI 7DC RB loudspeaker can be wired and installed, and the paint mask added for

painting and finishing.

Procedure

Follow the procedure steps below in the order in which they are presented. Read all the
instructions before starting.

1. Locate a suitable mounting position for the loudspeaker that will o er optimum acoustic
performance for the listening environment and audio system, and that is also practical and
aesthetically pleasing. The location should also allow enough room for the speaker wire to
enter the back can at one end.

2. Position the brackets as shown in Fig. 1, making sure that the lower faces of the brackets are
 ush with the lower face of the ceiling joists. Secure each bracket to the ceiling joist using
four screws per bracket.

3. With the help of an assistant, carefully lift the back can to the chosen location between the
ceiling joists, and lift and slide it into place, until it is supported by the four brackets and
centered between them (Fig. 2).

4. Secure the back can to the brackets, using four screws per bracket.

Wiring

WARNING: To avoid potential damage to your loudspeaker, ensure that the
amplifier is switched OFF prior to connecting or disconnecting any cables.

WARNING: Before switching the amplifier ON, double check that all connections
are secure and that the polarity is correct.

(Note that the speaker wire connections are made to the internal terminals inside
the back can.)

The screw terminals are designed to take substantial high quality
loudspeaker cable.

1. Remove the cover from the back can by undoing the four screws holding it
in place (Fig. 3).

2. Install the speaker wire in through one of the cable glands, and leave enough
slack to make the connections (Fig. 3). Tighten the cable gland, and tie down
the speaker cable to prevent it moving and rattling in operation. Make sure
that the speaker cable does not come into contact with nails or screws that
might damage the insulation. A second cable gland is provided to allow a
second speaker cable run to be installed.

3. Pull out the speaker cables and strip o approximately 8 mm (1/4") of the
outer protective layer from each conductor.

4. The positive wire from your ampli er should go to one of the red (positive)
terminals inside the back can (Fig.4). The negative wire from your ampli er
should connect to one of the black (negative) terminals. You can use the
other red and black terminals to run speaker wiring out of the other cable
gland and out to another speaker.

5. Make sure that the speaker cables are secured so they will not move and touch
the speaker cone when it is installed.

Fig. 1 Screw the back can brackets to the ceiling joists

Fig. 2 Screw the brackets and back can together.

500 mm

Fig. 3. Speaker Wire Installation.

Fig. 4. Cover removed from back can, showing the speaker terminals

Red (+ve)
Terminals

Black (-ve)
Terminals

12 PCI 7DC RB Quick Start Guide 13

Installation into the Back Can

With the back can installed and wired as shown in the previous pages, the loudspeaker assembly can now be installed into the ceiling and back can.

1. Remove the back can cover if it is in place.

2. With the help of an assistant, hold the speaker assembly up close to the
back can aperture.

3. The loudspeaker has four wires and a connector attached. Securely join this to
the matching connector in the center of the back can aperture.

4. The speaker assembly can now be connected to the back can using four screws as
shown. Take care not to trap or pinch the speaker wiring, or your  ngers or tie (Fig. 6).

Painting

1. A paint mask is supplied to protect the loudspeaker from paint, dust, and debris.
It allows you to paint and  nish the ceiling after the installation of the loudspeaker
into the ceiling.

2. Press the paint mask into the loudspeaker assembly, and it will be kept in place by
magnets.

This is left in place while the ceiling and frame surround is painted

3. It is strongly recommended that the metal perforated grille is sprayed, as this will
avoid clogging of the holes. If painting with a brush is the only option, then several
thin coats of paint will provide a superior  nish to that achieved by one applied
too thickly.

Fig. 4. Drywall Screws.

Fig. 5. Drywall Removed from the Aperture, and Cover Installed

Fig. 6. Connecting the speaker wiring to the back can

Fig. 7. Installing the loudspeaker assembly into the back can

Fig. 8. Installing the paint mask over the loudspeaker assembly

Installing the Drywall

1. The installation of drywall around the back can location is best done
using a single large sheet centered around the back can location (Fig. 4).
Use adhesive on the front face of the back can, and on the ceiling joists, and
install the drywall using drywall screws approximately 8 to 10 inches apart.
This will help prevent ceiling rattling and drywall movement and noises during
operation. CAUTION: Make sure that no drywall screws go into the wooden
case of the back can at any point.

2. After drywall installation, carefully cut out the hole in the drywall with a
suitable handtool, using the rectangular aperture of the back can as a guide
(Fig. 5). Be careful not to cut the speaker wires or any of the back can wood.
Make sure the drywall aperture is no larger than the aperture of the back can.
Remove any dust or debris from within the back can.

3. Install the back can cover using the four screws. This cover can be left in place
during painting and  nishing of the ceiling, and then removed when the
loudspeaker assembly is ready for installation. (Painting can also be done when
the loudspeaker assembly is position, as it is supplied with a painting mask.)

14 PCI 7DC RB Quick Start Guide 15

Fig. 11. Installing the Grille

Fig. 10. HF Switch Positions

Fig. 9. Rotating the baffle assembly

Ba e Rotation

1. The loudspeaker ba e assembly can be rotated to alter the coverage to suit
your installation. This is the equivalent of "toeing in" free-standing speakers to
face your normal listening position.

2. Undo the four screws as shown, but just enough to allow the rotation to the
desired position (Fig. 9).

3. Gently tighten the four screws when done, just enough to prevent movement
during use. The ba e can be rotated through +/- 45 degrees.

4. Test the system and readjust the position if needed.

HF Switch Adjustment

1. The HF switch has three positions, with 0 dB being  at. Adjust as necessary to
suit the room position and acoustic conditions (Fig. 10.).

2. Test the system and reset the switch position if needed.

Grille Installation

1. The grille should be carefully  tted by lining up the edges of the grille carefully
with the ba e and frame inside edges (Fig. 11). To avoid indentation damage,
do not press the centre of the grille; apply even pressure to each corner as it is
pressed  rmly into position.

2. To remove the grille, loop an opened paper clip or similar length of firm wire,
through two holes near a corner and pull gently. The grille is intended to be
a tight fit, so insert the wire at each corner in turn, pulling carefully to avoid
distortion of the mesh.

System Testing

1. Switch on the ampli er with the volume control at its lowest setting. Selec t
a suitable signal source and slowly turn up the volume to a low level. Check
that the loudspeaker is working correctly and is in phase - if not, switch o the
ampli er and recheck the connections.

2. Carefully check the area surrounding the installation and listen carefully
to ensure that there are no buzzes or rattles that could potentially impair
enjoyment of the system. If there are, then locate and silence the causes using
cable ties or suitable packing material.

Dimensions

PCI 7DC RB

PCI 7DC RB Back Can

328 mm [12.9"]

328 mm [12.9"]

163 mm [6.4"]

350 mm [13.8"]

350 mm [13.8"]

0 dB +3 dB

+1. 5 dB

HF Switch

700 mm [27,6"]

333 mm [13,1"]

"]

Ø333 mm [Ø13,1

332 mm [13,1"]

353 mm [13,9"]

190 mm [7,5"]

16 PCI 7DC RB Quick Start Guide 17

Other important information

1. Register online. Please register your new

Music Tribe equipment right after you purchase it by
visiting tannoy.com. Registering your purchase using our
simple online form helps us to process your repair claims
more quickly and e ciently. Also, read the terms and
conditions of our warranty, if applicable.

2. Malfunction. Should your Music Tribe
Authorized Reseller not be located in your vicinity,
you may contact the Music Tribe Authorized Ful ller for
your country listed under “Support” at tannoy.com. Should
your country not be listed, please check if your problem
can be dealt with by our “Online Support” which may also
be found under “Support” at tannoy.com. Alternatively,
please submit an online warranty claim at behringer.com
BEFORE returning the product.

3. Power Connections. Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.

Important information

Technical Speci cations

PCI 7DC RB

Perfo rmance

Frequency response (±3 dB) 60 Hz – 20 kHz

Frequency response (-10 dB) 40 Hz – 20 kHz

Sensitivity (1 W @ 1m) 91 dB

Directivity factor (Q) 5.7 averaged 1 kHz to 10 kHz

Directivity index (DI) 7.6 averaged 1 kHz to 10 kHz

Power handling (IEC)

Average 80 W

Programme 160 W

Peak 320 W

Recommended ampli er power 240 W @ 8 Ω

Nominal Impedance (Lo Z) 8 Ω

Rated maximum SPL (1 m, Lo Z)

Averag e 110 dB

Peak 116 dB

Trans former t aps NA

Crossover point 1.6 kHz

Coverage angles

500 Hz 173° horizontal, 136° vertical

1 kHz 188° horizontal, 153° vertical

2 kHz 130° horizontal, 169° vertical

4 kHz 8 6° horizontal, 96° vertical

Tran sdu cers

Low frequenc y diameter/material/type 201 mm (7")

High frequenc y diameter/material/type 25.4 mm (1")

Physical

Enclosure

Back can Wood, with spray painting

Ba e Re ex loaded UL94 V-0 rate d ABS

Grille Steel, with weather resistant coating

Safety features N/A

Clamping design N/A

Connectors Replacement Plug Housing

Dimensions (HxWxD) 350 x 350 x 160 mm (13.8 x 13.8 x 6.3")

Bezel dimensions 350x350 mm (13.8"x13.8")

Mounting depth 152 mm (6.0")

Hole cutout dimensions 332 x 332 mm (13.1"x13.1")

Net weight 3.8 kg (8.4 lbs)

Packed quantity 1

Included accessories Grille, paint mask, tool kit, washer s (x 2)

screws (x 2), plain washer (x 2)

Back can dimensions (H x W x D) 353 x 700 x 190 mm (13.9 x 13.1 x 7.5")