Tannoy IWSA-500 Brochure

iwSA 500
iwSA 500
Product Description
The iwSA 500 is a single channel BASH© power amplifier specifically designed to deliver 500 watts (max) of optimally matched power to the Tannoy iw62 TS in-wall subwoofer.
By augmenting the low frequency output of a full range installation, with a continuous power handling of 200W RMS, the iw62 TS subwoofer is capable of delivering impressive results in large domestic installations, and well as commercial applications such as small venues, restaurants, bars, public buildings and business music systems.
The subwoofer unit is unique in that it can operate in either passive or active mode, selectable by a switch on the baffle, and mono or stereo mode, by means of link wires on the circuit board. In active mode, the use of an external controller allows low frequency extension and equalization to be applied, and the crossover point to be tailored to the rest of the system and room.
With front mounted control of level, phase and a continuously variable crossover, adjustable from 50Hz – 150Hz, the iwSA 500 amplifier will therefore offer all the control needed to optimise the integration of this subwoofer system with the mid / high units, regardless of the installation positions.
Audio input is via 2 x unbalanced RCA’s, outputs are 4 x gold plated binding posts, while other controls include crossover bypass switch, limiter function switch for one or two sub configurations and sleep mode defeat switch.
The 2U iwSA 500 casing mounts directly into a standard EIA 19” rack or the brackets can be removed for shelf location with no ventilation issues.
Features
500 Watt (Max) power.
19” rack mountable
Limiter function - switchable one or two subs
Gold plated RCA inputs
Gold plated binding post speaker outputs
Adjustable crossover frequency
Variable phase adjustment
Crossover bypass switch
Sleep mode after 20-30 minutes
FCC & CSA/C/US approvals
Applications
Home theater surround sound
Boardrooms & offices
Business music systems
Reception / waiting rooms
Retail outlets / shopping malls
Lounges / bars
Cruise ships
iwSA 500
TECHNICAL SPECIFICATIONS
System
Maximum Output Power
Minimum Nominal Load Impedance
Distortion
Minimum Frequency Bandwidth
Input Impedance
Current Draw at 4
(1) (2)
Front Panel
Level Control
Crossover Frequency Adjustment
Phase Control
Crossover/Bypass Switch
On/Auto Switch
Power On Indicator
Rear Panel
Input Connectors
Link Connectors
Output Connectors
Mains Voltage Connector
Mains Voltage Fuse Holder
iwSA 500
500 Watts continuous into 4 250 Watts continuous into 8
4
<1% @ maximum rated output
20Hz - 500Hz (no filters or EQ)
>20 k
5 amps
Adjusts input signal level
50Hz - 150Hz
0° - 180° continuously variable
Engages / disengages low pass filter
On continuous / sleep mode
Blue LED
2 x RCA
2 x RCA
4 x Gold plated binding postings
120 Volt IEC - 2 conductor
T5AL, 250 Volt
Physical
Enclosure
Safety Features
Mounting
Approvals
Dimensions incl. feet and ears
Net Weight (ea)
Shipping Weight (ea)
LEVEL
50
+
OUTPUT 1
+ +
CROSSOVER FREQUENCY
16 gauge CRS
Thermal protection Auto shut down when internal
fault is detected
Ears for 19” rack mounting
CSA C/US and FCC
99 x 483 x 372mm (8.19 x 2.81 x 17.5)
6.8 kgs (15 lbs)
8.6 kgs (19 lbs)
PHASE
PASS
BY
CROSSOVERONAUTO
0
150
180
CAUTION
RISK OF ELECTRIC SHOCK
1 SUB
FUNCTION
2 SUBS
LIMITER
LINE IN LINE OUT
OUTPUT 2
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
ATTENTION
CAUTION:
FOR CONTINUED PROTECTION
AGAINST RISK OF FIRE, REPLACE
ONLY WITH SAME TYPE FUSE AND RATING.
ATTENTION:
UTILISER UN FUSIBLE DE RECHANGE
DE MEME TYPE ET CALIBRE.
NE PAS OUVRIR
POWER
OFF ON
5A 120V~60HZ
T5AL 250V
Rear Panel Switches
Power Switch
Limiter Function
Notes
(1)
Thermal protection may occur at high continuous power.
(2)
Depending on configuration, output power may be lower
due to limiting circuit.
Switchable 1 sub or 2 subs
Ordering Information
Item number
8000 4650
Item name
iwSA 500
Packaging Quantity
1
Gross Weight
8.6 kgs (19 lbs)
Gross Depth
372mm (17.5”)
Gross Width
483mm (21.19”)
Gross Height
99mm (8.19”)
Loading...