Tannoy IW-6-TDC Brochure
iw6 TDC
Product Description
The iw6 TDC is a full bandwidth in wall speaker system, using a 165mm (6.50") Tannoy
Dual Concentric™ point source, constant directivity drive unit with an additional 25mm
(1.00") Tannoy SuperTweeter™. Designed primarily for installation into standard stud
partition wall systems, it may also be used in cavity wall installations constructed with
standard thickness drywall as well as a wide range of other wall construction types with a
surface thickness of up to 25mm (1.00”).
High power handling and 91dB efficiency ensure this compact unit is ideally suited to
applications requiring the combination of premium sonic quality for music and speech
reinforcement and exceptional reliability and intelligibility.
The 165mm (6.50") Tannoy Dual Concentric™ drive unit comprises a multi fibre paper
pulp mid bass cone and a 25mm (1.00") ferrofluid cooled, titanium dome HF unit with
neodymium magnet system. The mid-bass and tweeter sections of this constant directivity
driver are coincidentally aligned to a true point source; ensuring a wide and controlled
dispersion for optimum coverage; this while avoiding the massive loss of energy, in the
vertical plane at the crossover frequency, inherent in two-way discrete designs.
The addition of a 25mm (1.00") titanium dome SuperTweeter™ extends the frequency
bandwidth out to over 50kHz, further enhancing the already class leading, low distortion
performance of the iw6 TDC with an exceptionally natural and open soundstage. The iw6
TDC is also equipped with dynamic high frequency protection.
The drivers and passive frequency dividing network are mounted in an injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material.
The class leading performance is further enhanced by the inclusion of six self aligning,
spring loaded clamps; allowing for quick install but also for simple removal or reorientation
of the loudspeaker. The rigidity of the clamps and baffle combination crucially provides the
acoustically optimum bond to the wall surface without risk of distortion to the baffle itself.
Gold plated spring loaded terminals are provided for ease of installation and a steel back
can is available as an optional installation accessory.
Features
• Extended frequency response and very low distortion
• Wide, controlled constant directivity dispersion for
optimum coverage
• Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discrete designs
• UV/weather resistant UL94V-0 ABS construction for
structural integrity
• Dynamic high frequency protection
• Six way self-aligning mounting system
• Ferrofluid cooled neodymium high frequency driver
• Five year warranty
Applications
• Foreground music and paging systems
• Multi-room audio systems
• Home theatre
• Business music systems
• Boardrooms and offices
• Retail environments
• Retail outlets and shopping malls
• Lounges and bars
• Cruise ships
• Courtrooms
Complementing any style of decor, the perforated metal grille and discreet moulded baffle
can be painted to blend seamlessly with any environment.
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW62TDC data file issue:1.06 // 15.01.08
iw6 TDC
TECHNICAL SPECIFICATIONS
System iw6 TDC
1)
requency Response (-3dB)
F
requency Range (-10dB)
F
System Sensitivity (1W @1m)
Nominal Coverage Angle 90 degrees conical
overage Angle (1kHz to 6kHz) 110 degree conical
C
Directivity Factor (Q) 5.6 averaged 1kHz to 6kHz
Directivity Index (DI) 6.5 averaged 1kHz to 6kHz
ated Maximum SPL
R
Average 110.5dB
verage 109dB
A
Peak 116.5dB
ower Handling
P
verage 90W
A
Programme 180W
Peak 360W
Recommended Amplifier Power 180W @ 8 Ohms
Nominal Impedance 8 Ohms
Distortion
10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic
250Hz 2.00% 0.12%
1kHz 0.33% 0.68%
10kHz 0.67% 0.21%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.57% 0.14%
1kHz 0.08% 0.28%
10kHz 0.27% 0.3%
Crossover 1.8Hz, 16Hz
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
(
5Hz - 51kHz
7
(
1)
6Hz - 54kHz
3
(2)
91dB (1W - 2.83V for 8 Ohms)
(3)
(with optional THP60 transformer)
Transducers
Dual Concentric™ Point source, constant directivity driver
Low Frequency 1 x 165mm (6.50”)
High Frequency 19mm (0.75”) titanium dome with neodymium
magnet system
Supertweeter™ 19mm (0.75”) titanium dome with neodymium
agnet system
m
Physical
Construction Baffle UL 94V-0 rated ABS
Clamping Design Six way, self aligning security toggle clamp system
Connectors Gold plated connectors with spring terminals
Hole Cutout Size 271.50 x 168.50mm (10.70 x 6.63”)
Dimensions
Front baffle 320 x 209 x 104mm (12.60 x 8.23”) (H x W)
Front of baffle to rear 104mm (4.10”)
of magnet assembly
Front of wall to rear 99mm (3.90”)
of magnet assembly
Net Weight 3kg (6lbs 6oz)
Included Accessories
Optional Accessories
Transformer Taps
70V
100V
Grille Steel, with weather resistant coating
ack can Zinc plated steel (optional accessory)
B
Maximum wall thickness - 25mm (1.00”)
Paint mask, cutout template, grille
Steel back can
Steel back can with THP60 transformer
Plaster (mud) ring
(optional)
60W / 30W / 15W / 7.5W / OFF & Low Impedence operation
60W / 30W / 15W / OFF & Low Impedence operation
Ordering Information
PART NUMBER PACKED QUANTITYCOLOUR
8000 3770 iw62 TDC White 1
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
MODEL NAME
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW62TDC data file issue:1.06 // 15.01.08
q y p
50
60
70
80
90
1
00
10 100 1000 10000 100000
0
5
10
15
20
25
30
35
4
0
45
1 10 100 1000 10000 100000
50
60
70
80
90
100
10 100100010000 100000
0 deg
10 deg
20deg
30deg
40deg
NECHOIC
A
FREQUENCY
RESPONSE
iw6 TDC
PERFORMANCE MEASUREMENTS
m on-axis frequency response
1
SPL, 1W/1m (dB)
frequency (Hz)
Impedance vs frequency
Impedance (ohms)
IMPEDANCE
Level (dB)
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
OFF AXIS
RESPONSE
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
frequency (Hz)
Horizontal off-axis response
frequency (Hz)
iW62TDC data file issue:1.06 // 15.01.08
Loading...