Tannoy iW 62 BACKCAN Quick Start Guide

Page 1
Quick Start Guide
)
iW 62 BACKCAN
IN WALL INSTALLATION
(1) Using screws that are at least ¾ " long, a x backcan to studs or joists. Tannoy recommends a
minimum of 8 screws.
(2) Run appropriate gauge and type of wire for your particular installation to the backcan location.
½ " or ¾ " conduit is also an option.
(3) Install a suitable connector for wire chosen into the ½ " or ¾ " knock out. Run wire through connector,
leaving enough length to reach the loudspeaker with excess for ease of connection.
(4) Leave excess wire in the backcan until drywall or desired  nishing is complete.
(5) The  ange on the front of the backcan will protrude through the drywall and act as a guide for
drywall installation.
(6) After desired  nishing is complete, connect the previous installed wire in the backcan to the red (+)
and black (-) terminals on the chosen loudspeaker model. An optional ground wire may be used to reduce RF interference.
(7) Follow installation instruc tions found in the loudspeaker quick start guide for  nal speaker installation.
(1
For technical assistance: Tannoy UK +44 1562 732290 or visit our website at tannoy.com.
(1) Alig nment tags for in wall m ounting
LEGAL DISCLAIMER
Music Tribe acce pts no liabilit y for any loss which m ay be su e red by any person w ho relies either w holly or in part up on any descript ion, photograph, o r statement cont ained herein. Technic al speci cations, appearan ces and other info rmation are subje ct to change wit hout notice. All tra demarks are the p roperty of t heir respec tive owners. Midas , Klark Teknik, Lab Gr uppen, Lake, Tannoy, Turbosoun d, TC Electronic, TC Helicon, Beh ringer, Bugera and Cool audio are trademar ks or register ed trademark s of Music Tribe Global Br ands Ltd. © Music Tribe Glob al Brands Ltd. 2018 All rights r eserved.
LIMITED WARRANTY
For the app licable warran ty terms and cond itions and addit ional informat ion regarding Mus ic Tribe’s Limited Warrant y, please see comp lete details onlin e at musictrib e.com/warrant y.
Page 2
iW 62 BACKCAN Dimensions
12.5 mm min
0.49" min
101.6 mm min
4.00" min
451.0mm
17.76"
1143.0mm
45.00"
89.1mm
3.51"
199.0mm
7.83"
436.0mm
17.17"
1200.0mm
47.24"
310.0mm
12.20"
96.7mm
3.81"
Loading...