Tannoy iw60 EFX User Manual

Definition Install iw60 EFX
Product Description
The Definition Install iw60 EFX is a multi purpose in wall surround / effects speaker designed around the unique Tannoy Dual Concentric™ drive unit. The speaker is conveniently configurable between two modes of operation: ‘Cinema Mode’, where the two optimally aligned 100mm (4.00”) Dual Concentric™ drivers generate a wide and even flow of acoustic energy over a large area for a diffuse room filling ambience and the direct radiating ‘Music Mode’, where the 165mm (6.50”) constant directivity Dual Concentric™ driver produces a more localised and focused sound, highlighting the distinct separation afforded by modern programme material. In Music mode the direct radiating pattern is auto switched using a 12V trigger.
Claims are made that having more drivers is better. While multiple drivers are needed to cover the full frequency spectrum it is a fact that a discrete woofer and tweeter array will produce a large null at the crossover frequency when you move through the vertical plane. In a product concept such as the iw60 EFX, using three sets of discrete drivers would cause this negative acoustic effect to occur three times in a single cabinet; something no amount of DSP could compensate for. The point source Dual Concentric™ units in the Tannoy iw60 EFX ensure that no such acoustical anomalies occur.
The Dual Concentric™ is effectively two drivers properly merged into one where, unlike ordinary drive units, the high frequency unit is positioned on the back of the low frequency driver. As a result they are on same axis, so ensuring that sound energy is effectively propagated from the same point and delivered through the centre of the low frequency cone as true point source. Such integration optimises reproduction quality by providing a constant time delay over the frequency spectrum, exceptional transient performance, wide dispersion and superior harmonic alignment; all of which delivers to the listening position a natural, clean and integrated sound with greatly enhanced intelligibility, sound staging and dynamics.
Characteristic of the Dual Concentric™ design is a very wide 'sweet spot' with an exceptionally even response throughout the listening area, as well as an extraordinary transient response; reasons enough for this phase accurate Tannoy designed drive unit to have been the choice of professional studio engineers all over the world for many years.
The heavily braced and comprehensively damped MDF cabinet is supplied with a paintable, flush mounting grille designed to blend seamlessly into any architectural space. A unique isolation mounting system optimises low frequency performance by controlling unwanted resonances within the install structure. A mounting frame is available as an optional pre-installation accessory to fit into standard construction 2" x 4" stud walls.
The exceptionally versatile, high power handling iw60 EFX is able to extract the full potential of contemporary multi-channel soundtracks; an in wall surround / effects speaker designed to reproduce the same bandwidth and sound pressure levels as the main speakers.
Features
• 165mm (6.50”) high sensitivity, point source and constant directivity Dual Concentric™ drive unit
(music mode)
• Two 100mm (6.50”) Dual Concentric™ drive units in dipole configuration (cinema mode)
• Constant time delay over the frequency spectrum
• Exceptional transient performance
• 90 degree conical dispersion (music mode 120 degrees horizontal by 90 degrees (cinema mode)
• Superior harmonic alignment
• Natural, clean and integrated sound
• Enhanced intelligibility, sound staging and dynamics
• Recommended amplifier power 100 to 200W @ 8 Ohms
• Sensitivity 90dB (1W = 2.83V for 8 Ohms)
• Maximum SPL 117dB average
• Rugged construction MDFclosed enclosure, internally braced and finished with textured black paint
• Isolation mounting system minimises energy transfer to the wall material
• Optional pre-installation frame available
Applications
• Media rooms
• Home theatre
• Boardrooms
• High end marine interiors
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
Definition Install iw60 EFX data file // issue 1.06 // 15.01.08
Definition Install iw60 EFX
TECHNICAL SPECIFICATIONS
System Definition Install iw60 EFX
1)(4)
(
(
1)(4)
10Hz - 23kH
1
74Hz - 27kHz
2)(4)
(
90dB (1W = 2.83V for 8 Ohms)
in music mode
egrees in cinema mode
d
(3)
(3)
4 Ohms in cinema mode
requency Response
F
Frequency Range
System Sensitivity (1W @1m)
Nominal Coverage Angle 90 degrees conical
Coverage Angle (1kHz to 6kHz) 120 degrees horizontal x 90
Directivity Factor (Q) 3.50 averaged 1kHz to 6kHz
Directivity Index (DI) 5.50 averaged 1kHz to 6kHz
Rated Maximum SPL
Average 110dB Peak 116dB
Power Handling
Average 100W Programme 200W Peak 400W
Recommended Amplifier Power 200W @ 8 Ohms
Nominal Impedance 8 Ohms in music mode
Distortion
Transducers
Music mode 1 x 165mm (6.5”) constant directivity
Cinema mode 2 x 100mm (4.0”) Dual Concentric™
Dual Concentric™
n dipole configuration
i
Construction
Enclosure 11.5 litre (net total volume),
inish Textured black paint
F
Connectors Gold plated spring terminals
ontrols Mode selection input (12V DC relay
C
Dimensions 590 x 345 x 94mm (H x W x D)
Optional Accessory Pre-installation mounting frame
NET Weight 9.50Kg (20.94lbs)
losed and internally
c braced MDF enclosure
White powder coated perforated
teel grille, foam behind
s
activated via Dinkle connector)
(23.23 x 13.58 x 3.70 ") (H x W x D)
10% Full Power (8.94V) 2nd Harmonic 3rd Harmonic 250Hz 1.84% 0.30% 1kHz 0.34% 0.61% 10kHz 0.91% 0.17%
1% Full Power (2.83V) 2nd Harmonic 3rd Harmonic 250Hz 0.19% 0.35% 1kHz 0.40% 0.32% 10kHz 0.46% 0.89%
Crossover 1.6kHz
Notes: (1) Average over stated Bandwidth. Measured in an IEC baffle in an Anechoic Chamber (2) Unweighted Pink noise input, measured at 1m on axis (3) Long term power handling capacity as defined in EIA - 426B test (4) Music mode (5) Cinema mode. For music mode refer to iW63 data
A full range of measurements, performance data, CLF and Ease™ Data can be downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs, California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing methods will always equal or exceed the published specifications, which Tannoy reserves the right to alter without prior notice. Please verify the latest specifications when dealing with critical applications.
Ordering Information
PART NUMBER PACKED QUANTITYCOLOURMODEL NAME
8000 5270 Definition Install iw63 EFX Black 1
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
Definition Install iw60 EFX data file // issue 1.06 // 15.01.08
50
60
7
0
8
0
90
00
00000100001000100101
0
5
1
0
15
2
0
2
5
30
10 100 1000 10000 100000
Music mode Cinema mode
50
60
70
80
90
100
00000
1000
01
000
1
0
010
1
0 deg 10 deg 20deg 30deg 40deg
NECHOIC
A FREQUENCY RESPONSE
Definition Install iw60 EFX
PERFORMANCE MEASUREMENTS
1m on-axis frequency response
SPL, 1W/1m (dB)
frequency (Hz)
Impedance vs frequency
Impedance (ohms)
IMPEDANCE
Level (dB)
Tannoy United Kingdom Tannoy North America Tannoy Deutschland Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
OFF AXIS RESPONSE
T: 00 44 (0) 1236 420199 T: 00 1 (519) 745 1158 T: 00 49 (180) 1111 881 T: 00 33 (0)1 7036 7473
frequency (Hz)
frequency (Hz)
Definition Install iw60 EFX data file // issue 1.06 // 15.01.08
Loading...
+ 5 hidden pages