iw4 DC
Product Description
The Tannoy iw4 DC is a full bandwidth in wall speaker system, using a 100mm (4.00")
Tannoy Dual Concentric™ point source, constant directivity drive unit, designed for
installation into standard stud partition wall systems. It may also be used in cavity wall
installations constructed with standard thickness drywall as well as a wide range of other
wall construction types with a surface thickness of up to 25mm (1.00”).
The Tannoy Dual Concentric™ drive unit comprises a multi fibre paper pulp mid bass cone
and a 19mm (0.75") ferrofluid cooled, titanium dome HF unit with neodymium magnet
system. The mid-bass and tweeter sections of this constant directivity driver are
coincidentally aligned to a true point source; ensuring a wide and controlled dispersion for
optimum coverage; this while avoiding the massive loss of energy, in the vertical plane at
the crossover frequency, inherent in two-way discrete designs.
Featuring a wide bandwidth frequency response and very low distortion, the iw4 DC is also
equipped with dynamic high frequency protection. This compact unit is specifically
designed for applications requiring the combination of premium sonic quality for music and
speech reinforcement and exceptional reliability and intelligibility.
The driver and passive frequency dividing network are mounted in an injection moulded,
paintable front baffle manufactured from UV/weather resistant UL94V-0 ABS material. The
class leading performance is further enhanced by the inclusion of four self aligning, spring
loaded clamps; allowing for quick install but also for simple removal or reorientation of the
loudspeaker. The rigidity of the clamps and baffle combination crucially provides the
acoustically optimum bond to the wall surface without risk of distortion to the baffle itself.
Complementing any style of decor, the perforated metal grille and discreet moulded baffle
can be painted to blend seamlessly with any environment.
Gold plated spring loaded terminals are provided for ease of installation and a steel back
can is available as an optional installation accessory.
Features
• 100mm (4.00") point source Dual Concentric™ driver
• Extended frequency response and very low distortion
• Wide, controlled constant directivity dispersion for
optimum coverage
• Does not suffer from massive loss of energy in the
vertical plane at crossover caused by two way
discrete designs
• UV/weather resistant UL94V-0 ABS construction for
structural integrity
• Dynamic high frequency protection
• Four way self-aligning clamp mounting system
• Ferrofluid cooled neodymium HF
• Five year warranty
Applications
• Foreground music & paging systems
• Multi-room audio systems
• Home theatre
• Business music systems
• Boardrooms and offices
• Retail environments
• Retail outlets and shopping malls
• Lounges and bars
• Cruise ships
• Courtrooms
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW4DC data file issue:1.06 // 15.01.08
iw4 DC
TECHNICAL SPECIFICATIONS
System iw4 DC
1)
requency Response (-3dB)
F
requency Range (-10dB)
F
System Sensitivity (1W @1m)
Nominal Coverage Angle 90 degrees conical
overage Angle (1kHz to 6kHz) 130 degrees conical
C
Directivity Factor (Q) 4.4 averaged 1kHz to 6kHz
Directivity Index (DI) 5.3 averaged 1kHz to 6kHz
Rated Maximum SPL
Average 106dB
verage 102.5dB
A
Peak 112dB
Power Handling
Average 60W
Programme 120W
Peak 240W
Recommended Amplifier Power 120W @ 8 Ohms
Nominal Impedance 8 Ohms
(
8Hz - 50kHz
8
(1)
3Hz - 54kHz
7
2)
(
88dB (1W - 2.83V for 8 Ohms)
(3)
(with optional THP30 transformer)
Transducers
Low Frequency 1 x 100mm (4”) Dual Concentric™ constant directivity
High Frequency 19mm (0.75”) titanium dome with neodymium
driver with multi fibre paper pulp cone
magnet system
Physical
Enclosure Baffle UL 94V-0 rated ABS
onnectors Gold plated connectors with spring terminals
C
ole Cutout Size 206 x 135 (8.11 x 5.31”)
H
Dimensions
ront Baffle 238mm x 159mm (9.37” x 6.26”)
F
Front of baffle to rear 89mm (3.51”)
of magnet assembly
Front of wall to rear 84mm (3.31”)
of magnet assembly
Included Accessories
Optional Accessories
Transformer Taps
70V
100V 30W / 15W / 7.5W / OFF
rille Steel, with weather resistant coating
G
Back can (optional) zinc plated steel
Maximum wall thickness - 25mm (1.00”)
Painted mask, cutout template, grille
Steel back can
Steel back can complete with THP30 transformer
Plaster (mud) ring
(optional)
30W / 15W / 3.75W / OFF & Low Impedence
& Low Impedence
operation
operation
Distortion
10% Full Power (5.5V) 2nd Harmonic 3rd Harmonic
250Hz 0.61% 0.55%
1kHz 1.46% 0.68%
10kHz 0.85% 0.13%
1% Full Power (1.73V) 2nd Harmonic 3rd Harmonic
250Hz 0.48% 0.87%
1kHz 0.43% 0.36%
10kHz 0.43% 0.06%
NET Weight 2.60kg (5.73lbs)
Notes:
(1) Average over stated bandwidth. Measured at 1 metre on axis.
(2) Unweighted pink noise input, measured at 1 metre in an anechoic chamber
A full range of measurements, performance data, CLF and Ease™ Data can be
downloaded from www.tannoy.com
Full independent verification of published specifications carried out by NWAA Labs,
California can also be obtained from the downloads section of www.tannoy.com
Tannoy operates a policy of continuous research and development. The introduction
of new materials or manufacturing methods will always equal or exceed the
published specifications, which Tannoy reserves the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Ordering Information
PART NUMBER PACKED QUANTITYCOLOURMODEL NAME
8000 4400 iw4 TDC White 1
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
Tannoy adopts a policy of continuous improvement and product specification is subject to change
iW4DC data file issue:1.06 // 15.01.08
50
60
70
80
9
0
1
00
10 100 1000 10000 100000
0
5
10
15
20
25
30
35
40
45
50
1 10 100 1000 10000 100000
50
60
70
80
90
100
10 100100010000 100000
0 deg
10 deg
20deg
30deg
40deg
NECHOIC
A
FREQUENCY
RESPONSE
iw4 DC
PERFORMANCE MEASUREMENTS
m on-axis frequency response
1
SPL, 1W/1m (dB)
frequency (Hz)
Impedence vs frequency
Impedance (ohms)
IMPEDANCE
Level (dB)
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
OFF AXIS
RESPONSE
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
frequency (Hz)
Horizontal off-axis response
frequency (Hz)
iW4DC data file issue:1.06 // 15.01.08
0
3
0
60
90
1
20
150
180
2
10
240
270
3
00
330
360
100 1000 10000
1
10
100 100010000
BEAMWIDTH
iw4 DC
PERFORMANCE MEASUREMENTS
eamwidth vs Frequency
B
Degrees
frequency (Hz)
DI vs Frequency
DIRECTIVITY INDEX
Q
frequency (Hz)
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW4DC data file issue:1.06 // 15.01.08
iw4 DC
-
48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
6
0
9
0270
3
00
330
-48
-36
-24
-12
0
0
3
0
60
90270
300
3
30
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
-48
-36
-24
-12
0
0
30
60
90270
300
330
PERFORMANCE MEASUREMENTS POLAR PLOTS (1/3 OCTAVE)
100 Hz
125 Hz
160 Hz
00 Hz
2
630 Hz
630 Hz
800 Hz
800 Hz
1 kHz
1 kHz
1.25 kHz
1.25 kHz
250 Hz
315 Hz
400 Hz
500 Hz
1.6 kHz
1.6 kHz
2 kHz
2 kHz
2.5 kHz
2.5 kHz
3.15 kHz
3.15 kHz
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
4 kHz
5 kHz
6.3 kHz
8 kHz
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
10 kHz
12.5 kHz
16 kHz
20 kHz
iW4DC data file issue:1.06 // 15.01.08
BACK CAN FITTED IN STUD PARTITON
451.0
[17.76"]
477.0
[18.78"]
89.1
[3.51"]
[0.49"min]
101.5 min
[4.00"min]
STUD WALL COVERING MATERIAL
FITTED AFTER BACK CAN HAS
B
EEN INSTALLED IN POSITION.
440.0
[17.32"]
210.0
[8.27"]
139.0
[5.47"]
TOP
iw4 DC
2
01.5
[7.93"]
130.5
[
5.14"]
84.0
[3.31"]
5
.0
[0.20"]
238.0
[9.37"]
1
59.0
[6.26"]
310.0
[12.20"]
96.6
[3.80"]
DIMENSIONAL SKETCHES & BACK CAN ACCESSORY
84.0mm
3.31”)
(
5.0mm
0.20”)
(
38.0mm
2
(9.37”)
130.5mm
5.14”)
(
201.5mm
(7.93”)
159.0mm
(6.267”)
TEMPLATE HOLE CUTOUT SIZE - 206mm x 135mm [8.11” x 5.31”]
WALL COVERING MATERIAL
FITTED AFTER BACK CAN HAS BEEN
INSTALLED IN POSITION.
12.5 min
0.49” min
101.6 min
4.00” min
STUD
BACK CAN FITTED IN STUD PARTITION
451.0
17.76”
89.0
3.51”
440.0
17.32
MODEL NAMEPART NUMBER
Ordering Information
8000 5130 iw4 TDC/DS Back Can Unpainted Steel 1 4.00Kgs (8.80lbs)
8000 5140 iw4 TDC/DS Transformer Back Can Unpainted Steel 1 11.00Kgs (23.1lbs)
8000 5100 Pre-install mounting ring for iw4 TDC/TS -- -
139.0
5.47”
210.0
477.0
8.27”
18.787”
BAFFLE / GRILLE
COLOUR
310.0
12.20”
PACKED
QUANTITY
96.6
3.80”
PACKED
WEIGHT
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW4DC data file issue:1.06 // 15.01.08
iw4 DC
ARCHITECTURAL SPECIFICATIONS
Architectural specifications
The in wall speaker shall consist of a 100mm (4.00") full range, point source Dual Concentric™ transducer mounted in an injection moulded front baffle
manufactured from UV/weather resistant UL94V-0 ABS material. The two-way system shall incorporate an optimised low loss crossover network. The wiring
terminals shall be gold plated spring loaded connectors.
Performance of the in-wall speaker shall meet or exceed the following criteria: The system shall have a conical coverage angle of 130 degrees (1kHz to
6kHz). Frequency response measured on axis shall be 73Hz -54kHz (-10dB from rated sensitivity, measured in an IEC baffle in an anechoic chamber) with
no equalization. Sensitivity shall be 88dB (1W @ 1m). Longterm power handling capacity as defined in EIA-426B test shall be 60W, recommended amplifier
power 120W @ 8 Ohms. The nominal system impedance shall be 8 Ohms.
n 70V or 100V distributed audio systems the iw4 DC shall be used with the optional accessory THP30 high performance, low insertion loss transformer with
I
0, 15, 7.6 and 3.75W taps* available.
3
weather resistant perforated steel grille covers the transducer. Both the grille and baffle shall be paintable.
A
The system shall not exceed the following dimensions:
Front Baffle 238mm x 159mm (9.37” x 6.26”), Front of baffle to rear 89mm (3.51”) of magnet assembly, Front of wall to rear 84mm (3.31”)
Hole cutout size shall be 206 x 135mm or 8.11 x 5.31".
The in wall speaker system shall be the.....iw4 DC.
*70.7 Volt only
of magnet assembly
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW4DC data file issue:1.06 // 15.01.08
iw4 DC
NOTES
Tannoy United Kingdom
Tannoy North America
Tannoy Deutschland
Tannoy France
Tannoy adopts a policy of continuous improvement and product specification is subject to change
T: 00 44 (0) 1236 420199
T: 00 1 (519) 745 1158
T: 00 49 (180) 1111 881
T: 00 33 (0)1 7036 7473
E: enquiries@tannoy.com
E: inquiries@tannoyna.com
E: anfragen@tannoy.com
E: ventes@tannoy.com
iW4DC data file issue:1.06 // 15.01.08
Loading...