Tannoy HTS-100 Owners manual

HTS Manual 3/3/06 14:50 Page 1

C M Y CM MY CY CMY K

&

Tannoy has a policy of continuous improvement and this specification sheet provides the latest information at the time of printing.

All specifications may be subject to further change. Please contact the Tannoy website for the latest information.

The Tannoy HTS100 and HTS200 speaker systems and the Tannoy HTS100/200 subwoofer are all designed by Tannoy Ltd and

manufactured for Tannoy Ltd to rigid specifications in accordance with CE, CCC, CB and CSA international regulations.

Register your product online at www.tannoy.com

&

Tannoy United Kingdom T: [phone] F: [phone] E: [e-mail]
Tannoy North America T: [phone] F: [phone] E: [e-mail]
Tannoy Deutschland T: 0180 1111 88 1 F: 0180 1111 88 2 E: [e-mail]

Tannoy adopts a policy of continuous improvement and product specification is subject to change.

6481 0479

SET UP GUIDE

Composite

HTS Manual 3/3/06 14:50 Page 2

SET UP GUIDE

C M Y CM MY CY CMY K

&

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with manaufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)
that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, wall sockets, and the point where they
exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

14. WARNING: To reduce the risk of fire or electrical shock, this apparatus should not be exposed to rain or moisture and
objects filled with liquids, such as vases, should not be placed on this apparatus.

15. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the wall socket.

16. The mains plug on the power supply cord shall remain readily accessible.

17. Due to the powerful drive unit magnet, do not place within (3 feet) 1 metre of a television or computer monitor.

The lightning flash with an arrowhead symbol within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the

!

literature accompanying the product.

ELECTRICAL REQUIREMENTS

Check that the voltage rating displayed on the rear panel is correct for your area before connecting. If it is
incorrect, set with the voltage selection switch, ensuring protective cover is replaced and the appropriate
fuse used (see specification).

EUROPEAN MODELS

A mains cable is supplied with an IEC moulded socket at one end and a moulded mains plug at the other end.
Where the moulded plug is fitted with a mains fuse, always replace with the same 5A rated fuse.
If the fitted plug is unsuitable for your type of outlet sockets, it should be cut off and disposed of safely, in
case it is inserted into a live socket elsewhere. The wires in the mains cable are coloured in accordance with
the following code:

GREEN AND YELLOW- EARTH

BLUE- NEUTRAL

BROWN- LIVE

AS THE COLOURS OF THE WIRES IN THE MAINS CABLE MAY NOT CORRESPOND WITH THE
COLOURED MARKINGS IDENTIFYING THE TERMINALS IN YOUR PLUG, PROCEED AS FOLLOWS:

• The wire which is coloured GREEN AND YELLOW must be connected to the terminal in the plug which
is marked either by the letter E, the earth safety symbol, or coloured GREEN or GREEN and YELLOW.

• The wire which is coloured BLUE must be connected to the terminal in the plug which is marked by the
letter N or coloured BLACK.

• The wire which is coloured BROWN must be connected to the terminal in the plug which is marked by
the letter L or coloured RED.

• Ensure that the terminals are tightened securely, and no loose strands of wire are present.

• Ensure cord grip is clamped over outer sheath of cable, rather than over the wires.

FUSE PROTECTION

An additional mains fuse is provided in the IEC power inlet on the back of the subwoofer, which can only be
removed with the power cord unplugged. This must be replaced by a fuse of the same type and rating (see
Specifications or refer to rear panel).

WARRANTY

Please complete and return the enclosed warranty registration document - this does not limit your
legal rights. This equipment has been produced and tested with care and precision. It is built to give
first class service and carries a 2 year warranty for the passive speakers and 1 year warranty for
the active subwoofer. If the equipment proves to be defective within this period for any reason other
than accident, misuse, unauthorised modification or fair wear and tear, Tannoy will repair any such
defect or, at our option, replace it without charge for parts, labour or return carriage. This warranty
is given in addition to the customer's statutory rights.

If you suspect that there is a problem with your HTS subwoofer or the loudspeakers included with this
system then please contact your local Tannoy dealer who will be able to advise on appropriate action.
Please register your HTS system on-line at www.tannoy.com.

Composite

2 3