Tannoy Edinburgh Brochure
Edinburgh HE
Technical innovation and superb cabinet design combine in a
speaker which is as striking to look at as it is exciting to hear
THE PRESTIGE RANGE
THE PRESTIGE RANGE
EDINBURGH HE
In addition to real walnut veneer, there is extensive use of solid
walnut edgings on the cabinet of the Edinburgh HE. Its rigid
construction, which is extensively cross-braced and heavily internally
TECHNICAL SPECIFICATION
PERFORMANCE
Recommended amplifier power
Power handling
Power handling 450 Watts Peak
Maximum SPL 115dB (120 Watts RMS / 1m)
Sensitivity
Nominal impedance
Frequency response
Total harmonic distortion Less than 1.35% @ 120 watts RMS
DRIVE UNIT
Dual Concentric mid/bass frequency
Dual Concentric high frequency
Dispersion 90 degrees conical
CROSSOVER
Frequency
Type
Adjustment +/- 3dB over 1.1kHz to 25kHz shelving.
CABINET
Enclosure type
Volume 200 litres
Dimensions mm (inches)
Material
Weight kgs (lbs)
Finish options
50 - 200 watts
120 watts RMS.
120dB (450 Watts Peak / 1m)
94dB (2.83v @ 1m)
8 ohms
28Hz - 25kHz -6dB
(50Hz – 20kHz)
300mm (12") Dual Concentric
utilising a paper pulp cone with HE twin
roll fabric surround with 52mm edgewound voice coil
33mm (1.3") unit centrally mounted within
the bass unit voice coil to achieve a true
coincident acoustic point source. Tulip
Waveguide and edge wound voice coil.
1.1kHz
Bi-wired, hard wired passive, low loss 3
order low frequency.
1st order compensated high frequency.
+ 2dB to – 6dB per octave over 5.0kHz
to 25kHz slope.
Distributed port reflex
1020h x 660w x 420d (40.2h x 26w x 16.5d)
18 mm high-density enclosure material
internally cross-braced and heavily damped.
36 (79.4)
Walnut veneer and solid walnut edging
and trim detail.
TM
driver
damped, results in a speaker which is as striking to
look at as it is exciting to hear.
Behind the classic lock and key secured grille lies a
Tulip WaveguideTM, twin magnet edition of the 300mm
(12") Tannoy Dual ConcentricTM driver with edge
wound voice coils. Renowned for its unique point
source symmetrical dispersion properties, it
incorporates all the latest refinements of this driver
design exclusive to Tannoy. HE, or Hard Edge, refers
to the material used in the construction of the driver
surround. The combination of this and the unique
drive unit chassis earthing facility results in a tighter,
faster and more controlled bass with fluid, transparent
midrange and high frequency performance of
great purity.
The speaker is driven through gold plated captive
link terminals, designed to allow normal or Bi-wire
configurations, and a hard-wired time compensated
crossover network. Superior Van den Hul wiring is
used throughout the Edinburgh HE to maintain the
signal integrity. Treble energy and roll off can both
be adjusted by means of two high current switch
rd
blocks. Exceptional transient performance and smooth
bass response are achieved by the use of a distributed
port reflex system.
Features: 300mm (12") Dual Concentric point source symmetrical
dispersion driver • HE hard edge twin roll fabric driver surround
and driver chassis earthing ensures fluid, open midrange and
clean, detailed high frequencies • Rigid, heavily damped, cabinet
construction providing exceptional strength and rigidity, speeding
up the aural response of the speaker • Extensive internal bracing
strengthens cabinet and reduces colouration, enhancing the
midrange detail, speed and clarity of the bass • Bi-wired, hard
wired adjustable time compensated crossover utilising premium
quality components • Distributed port reflex enclosure design
Tannoy Ltd. North Lanarkshire, ML5 4TF Scotland Tel: 01236 420199 Fax: 01236 428230
Tannoy/TGI North America, 300 Gage Avenue, Kitchener, Ontario, Canada N2M 2C8
Tannoy Nederland BV. Anthonetta Kuijlstraat 19, 3066 GS Rotterdam, Nederlands
Tannoy adopts a policy of continuous improvement and product specification is subject to change.
Colours represented here are as accurate as the printing process allows.
Tel: 519 745 1158 Fax: 519 745 2364
Tel: 010 2860555 Fax: 010 2860431
www.tannoy.com
6843 0672
Loading...