Tanita innerScan Dual RD-545 Quick Start Manual

EU Representative
TANITA Europe B.V.

EU Representative
TANITA Europe B.V.

Mumbai 400 059 India

DualFrequencyBodyCompositionMonitorRD-545

QuickStartGuide

・The product design and specifications may be changed at any time without prior notice.
・The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such mark by Tanita

Corporation is under license.

・Android is a trademark of Google Inc.

Specifications

RD-545

Weight Capacity

200kg/440lb/31st6lb

Weight Increments

0-100kg/0.05kg 100kg-200kg/0.1kg
0-200lb/0.1lb 200-440lb/0.2lb
0-15st0lb/0.1lb 15st0lb-31st6lb/0.2lb

Personal Data

4 memories

Power Supply

4×AA Alkaline batteries(included)

Power Consumption

120mA Maximum

Measuring Current

50kHz, 6.25kHz, 100µA

Front

Battery Cover

Up / Recall Button

Weight-Only / O Button

SET
/ Communication Button

Down
/ Item Select Button

Features and Functions

Back

AccessoriesLocation Code Quick Start Guide

AA-Size Batteries (4

)

Battery Box 

Not allowed to mix batteries with consumer wastes!

As consumer you are legally bound to return used or discharged
batteries. You can deposit your old batteries at the public collecting
points in your town, or wherever the corresponding batteries are sold
and specically marked collecting boxes have been set up. In case of
scrapping the apparatus, the batteries should be removed from it and
deposited at the collecting points as well.

©2017 TANITA Corporation RD-5457611(0)-1601FA

See the instruction manual for details. www.tanita.eu/help-guides

Applicable Age Range

Body Mass Index

5-99 years old

5-99 years old

Total & Segmental Body Fat (%)

18-99 years old

Total & Segmental Muscle Mass

18-99 years old

Physique Rating

18-99 years old

Bone Mass

18-99 years old

Vesceral Fat Level

18-99 years old

Basal Metabolic Rate

18-99 years old

Metabolic Age

18-99 years old

Body Water (%)

18-99 years old

Total & Segmental Muscle Quality

Disposal

This is an electronic device.
Please dispose of it as an electronic device, not
as general household waste. Please follow the
regulations in your local region when
disposing of this device.

Do not attempt to disassemble the monitor. Do not modify this equipment in any way.
Do not wash the monitor in water.
Do not submerge this monitor in water.

Doing so may damage the monitor or cause it to malfunction.

Keep away from water.

Doing so may damage the monitor or cause it to malfunction.

Do not use or store this monitor in the following locations.

·Locations that are exposed to direct sunlight, near to heaters, or exposed directly to air from air conditioning
units, etc.

·Locations where there are severe temperature changes or a large amount of vibration.

·Locations with high levels of humidity or moisture

Do not use boiling water, benzene, thinner or alcohol, etc. to clean the monitor.

If the monitor becomes dirty, soak a soft cloth in water or neutral household detergent, wring it out thoroughly
and wipe the monitor clean, then use a dry cloth to wipe the monitor dry.

Another person should assist persons with disabilities who may not be able to take a measurement
alone.

Be sure to insert the batteries with the polarities (+, -) in the correct position.

If the batteries are incorrectly inserted, battery fluid may leak and damage the floor. (If you do not intend to use
this monitor for a long period of time, it is advisable to remove the batteries before storage.)

Do not step on the monitor when your body is wet (immediately after a shower or bath, etc.)

Be sure to thoroughly dry your body and feet before using the monitor. Failure to do so may cause you to slip or
fall, resulting in injury. Also, the monitor cannot take accurate measurements if your body or feet are wet.

Place the monitor on a hard, flat surface where there is minimal vibration to ensure safe and
accurate measurement.

Do not use the monitor near other products such as microwave ovens that emit electromagnetic waves.

Doing so may cause the monitor to malfunction, preventing accurate measurements.

Avoid excessive impact or vibration to the monitor.

Doing so may damage the monitor or cause it to malfunction,or may cause setting to be erased.

Always…

SET Button O Button

Insert the batteries Set your location code

Getting Accurate Readings

Preparations before Use

To ensure accuracy, readings should be taken without clothing and under consistent conditions of hydration. If you do not undress,
always remove your socks or stockings, and be sure the soles of your feet are clean before stepping on the measuring platform. Be
sure that your heels are correctly aligned with the electrodes on the measuring platform. Don’t worry if your feet appear too large
for the unit accurate readings can still be obtained if your toes overhang the platform. It is best to take readings at the same time of
day. Try to wait about two hours after rising, eating, or hard exercise before taking measurements. While readings taken under
other conditions may not have the same absolute values, they are accurate for determining the percentage of change as long as the
readings are taken in a consistent manner. To monitor progress, compare weight and body fat percentage taken under the same
conditions over a period of time.

An accurate reading will not be possible if the soles of your feet are not clean, or if your knees are bent or you are in a sitting position.

Different locations across the world have different gravitational pulls. These differences affect
the accuracy of the weight measurement. You can obtain the most accurate weight readings
by selecting the correct gravity setting on the scale according to your geographical location.

1.When the power is turned off, press any of the     buttons to start configuring the
settings.

2.Refer to the map enclosed, and press the   buttons to select your location code.

3.Press the button to enter and save the setting.

Please note that the included
batteries from factory may
have decreased energy levels
over time.

Note

Up ButtonDown Button

Ball-of-foot Electrodes

Grip

Illumination

Control Panel

Heel Electrodes

Display Screen

Weight

For Your Safety

Prohibited

Warning

Caution

This mark indicates actions that are prohibited.

This mark indicates instructions that must always be followed.

This section explains precautionary measures to be taken to avoid injury to the users of this device and
others, and to prevent damage to property. Please familiarise yourself with this information to ensure
safe operation of this equipment.

Failure to follow instructions highlighted with this mark could result in death
or severe injury.

Prohibited

Warning

Do not step on the edge of the platform.Do not jump onto, or on the monitor.

Doing so may cause you to fall or slip, resulting in serious injury.

This monitor must not be used by people with pacemakers or other medical implants.

This monitor passes a weak electrical current through the body which could interfere with and cause the
malfunction of electrical medical implants, resulting in serious harm to the user.

Do not place this monitor on a slippery surface such as a wet floor.

Doing so may cause you to fall or slip, resulting in serious injury. It may also cause water to get inside the
monitor resulting in damage to internal components.

Interpretation of measurements (e.g. evaluation of measurements and formulation of exercise
programmes based on the measurements) must be performed by a professional.

Implementing weight loss measures and exercise programmes based on self-analysis could be harmful to your
health. Always follow the advice of a qualified professional.

Failure to follow instructions highlighted with this mark could result in injury or
damage to property.

Do not use old batteries together with new batteries, or a mix of different types of batteries at the same time.

Doing so may cause battery fluid to leak or the batteries to become excessively hot and rupture, resulting in
damage to the monitor or injury.

Do not use rechargeable batteries.

Do not insert your fingers into gaps or holes.

Doing so may result in injury.

Do not stand on the display screen or control panel.

This monitor is not intended for professional use including hospitals, medical or fitness facilities. It is not
equipped with the components required for heavy usage. Using the monitor in a professional location will
invalidate the warranty.

This monitor is intended for home use only.

If the cable does not automatically return into the monitor unit, untwist the cable, pull it out approximately 20cm
and then try returning it again.

Do not pull out the cable unless using the monitor for measurement, as doing so may damage the monitor.
Do not pull out the cable beyond the red mark.
Do not pull the cable too forcefully.

Never allow an infant or small child to carry the monitor.

Store out of reach of small children.

The child may drop the monitor, resulting in injury.

Small children may become caught up in the cables, resulting in injury.

Caution

Turn the Bluetooth setting on, and use the
URL to download the My Tanita app.

Select "Measurement" in the app, and then
follow the instructions in the app.

Measurement data is automatically
sent to the smartphone.

Step onto the monitor to take measurements. Data from a
maximum of 10 measurements is saved in the monitor.

Saved data is sent to the smartphone together with other new
measurements next time the phone is connected to the monitor.

From the next time, just step onto the
monitor to take measurements.
Data from a maximum of 10
measurements is saved in the monitor.

Launch the app. You need
to register as a member to
use the My Tanita app.
After registering, login with
your registered details.

Tap "Sync / Pair "device button.
Follow the instructions in the app.

Select "Input Data", then select "Input from
BCM".
Select "RD-545" in the next screen.

STEP

1

www.tanita.eu

21

1

3 4

21

Connecting to Your Smartphone

STEP

2

Taking Measurements

If you do not have your smartphone when taking measurements

If you do not have your smartphone when registering personal data

Measurement Results

Metabolic Age Total Body Water (%) BMIBasal Metabolic Rating

Setting the Date and Time

Registering Personal Data

Registering your Body Composition

Body Fat (%)*

Visceral Fat

Muscle Mass* Muscle Quality Score*

Bone Mass

Press  .

2

Use   and  to set the date
and time.

1

Press  .

2

Use   and  to register the
personal data number (1 - 4),
date of birth, sex (male/female/) and height.

3

Press  or  to turn the pulse measurement function ON or OFF.
Press   to enter the setting.

See the instruction manual for details. http://tanita.eu/help-guides

* Press   to display the measurement results for individual parts (left arm, right arm, left leg, right leg, trunk).
* There is no muscle quality score for the trunk.

The screen displays and instructions may differ depending on the app specifications.

Saved data is sent to the smartphone
together with new measurements the
next time the smartphone is
connected to the monitor when taking
measurements.

SET Button O Button

When 0.00kg appears in the display, hold the operating section and stand
on the measuring platform correctly with bare feet. Please remain as still as
possible during measurement.

Holding the operating section or removing the operating section and placing it on
the floor before 0.00kg appears in the display may prevent the meter from
measuring correctly.

Note

Up ButtonDown Button