Tane TANE-05 Specsheet

"We Contact The World"

®

Industrial and Automotive Proximity Contacts Since 1979

1984 saw the birth of the Alarm Contact Division of Tane Services Inc. known now as Tane Alarm
products. Tane uses the finest deactivated RHODIUM reeds made today to ensure long life and no
sticking. (See explanation below on rhodium plated reeds). Our contacts have been tested to go over

400,000,000 cycles; more important, they are able to sit still for years in an unused door and
operate that one critical time. Feel free to pick on our thirty plus years of reed engineering experience.

The Best Guarantee Since 1984: $50-1

What the above means is that we guarantee NO STICKING and NO FALSE ALARMS. If during the normal
use of TANE (TAP) contacts, you have a false alarm, we will replace the defective switch with $50 in credit
upon return of the defective switch. (If contact fails at installation we will replace it with $20
in credit, after-installation $50). This warranty is good for the life of the installation, but does not cover
sticking due to high voltage surges or lightning. (For such a rare occurance TANE will replace that contact
two for one.) The reason for such a strong warranty is due to the continued testing of our reeds in
both independent labs as well as in the field. Our reeds have been rated to over 400 million operations
without sticking and have been used in Electronics, Military and Automotive since 1979. Please call us for a
detailed brochure on either our reed switches or test

reports. UL BP-4702.

*Outside of U.S.A. warranty is $20-1. UL, CUL, CE

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

Finally, a Brief Technical Explanation on Rhodium Reed Contacts:

Gold and Rhodium plating treatments can fail for many reasons most of which can be prevented with tight
quality control. However, the formation of Polymers on these surfaces will occur in the field due to the
presence of organic traces and oxygen on the switch.
Tane uses reeds that use a unique oxygen treatment stabilizing the rhodium surface and removing all
organic impurities. The result is an excellent switch with long life, not prone to the sticking or poor
contact problems prevalent in our industry. Patent #3857175 UL# E70063

Thus Tane makes this guarantee………$50-1!

TANE’s high quality is assured because of the

use of de-activated Rhodium Plated reed

switches which are Polymer free and non-stick.

906 Jericho Turnpike

New Hyde Park, NY 11040

800-852-5050 / 516-328-3351

Fax: [phone]

www.tanealarm.com

E-MAIL: [e-mail]

Tane Catalog 2006.qxd 8/3/06 8:50 AM Page 2

3•TANE

"We Contact The World"

®

800-852-5050

E-MAIL: [e-mail]

516-328-3351

FAX: [phone]

"We Contact The World"

®

800-852-5050

E-MAIL: [e-mail]

516-328-3351

FAX: [phone]

3/4″ Reed Rollerball 3/4″ x 1 5/8″ Special Plastic Resists Dirt 10

18″ Leads with Spacer

Free Spacer

Reed Button 3/4″ x 1 1/3″ 18″ Leads or 11

Easy Terminal Connect

3/8″ Adjustable

3/8″ x 1″

18″ Leads

11

Reed Button Adjustable Head

1/4″ x 1″

1/4″ Recess 1/4″ x .54″ Short Magnet Option 12

1/4″ x 1″ Flange

Ultra Thin .60″ x .24″ Ultra Thin 13

1″ Gap
Flange Mount 1.33″ x .3″ x .53″ Vent Mag Available 14
Self Stick Side Lead Option

1″ Gap
Surface Quick 2″ x 3/8″ x 1/4″ Easy Mount Terminals 15
Connect Strong Adhesive

Thin Design

1″ Gap
Surface Quick 1 7/8″ x 1/2″ x 3/8″ Quick Connect Terminals 15
Connect Strong Adhesive

3/8″ x 3/4″ 3 Sizes Available 6

3/8″ Recess 3/8″ x 1 1/4″ Bare Magnet Option 7

3/8″ x .54″ Tight Fit Magnet Option 7

3/8″ Recess 3/8″ x 3/4″ Thin Magnet 8
3/8″ Mini Recess 3/8″ x 9/16″ Tight Fit Magnet 8

Stubby Press Fit 1/2″ x 3/4″ Te r minal Option
3/4″ Steel Door 3/4″ x .8 Shorter Magnet 9
1/2″ Diameter 1/2″ x 3/4″ Contact & Magnet

18″ Leads
3/4″ Stubby 3/4″ x 3/4″ Free Spacer 10
Reed Button Ball Easy Terminal Option

STYLE SIZE FEATURES PAGE

STB-10

STB-10/MINI-10 DM

SD-70/80

Tane 22 & 22TC

RB 32

PB52 & PB52TC

Tane 3/8 ASH

TAP-15

Mini-Disc

FM-106

Tane 60

Tane 50

Tane Catalog 2006.qxd 8/3/06 8:50 AM Page 3

4•TANE

"We Contact The World"

®

800-852-5050

E-MAIL: [e-mail]

516-328-3351

FAX: [phone]

Crimp Tool Kit Coax Crimp Tool 5 Die, Stripper and Cutter

with Accessories TN-Crimp Tool Kit 24

Connectors Twelve Types BNC Connectors and

Adaptors 24

SPK-202 Self Contained Speaker 22
SCH-101 Flush Mount Speaker 23
SPK-508

Four Styles

30 Watt Speaker/Horn 23
SPK-5FL Stand Alone Speaker/Horn 23

SCS-101 Self Contained Style 21
SIR-202 Stand Alone Style 21
BOX-WSPR66A Five Styles Stainless Steel Dual Tamper 21
SIR-5FL Flush Mount Dual Tone Indoor 22
SIR-508 30 Watt Horn Siren 22

Dry or Gell
B Connector Standard Size Brass & Beryllium Copper 20

Plated with Bright Nickel

Great Price
Mini Sizes 2″ Ht X 3″ Wide Small Size 20

Very Bright

Wide Gap Commercial 4 1/8″ X 5/8″ X 5/8″ Gap 2 1/2″ 19

Overhead Track Mount Mounting on Door Tracks 18

*Pin and Glued Cable*
Overhead Garage Door (Standard Industry Size) 10 Way Bracket 18

18″ or 36″ Cable

Contact and Magnet 1.4″ X .31″ x .31″ SuperStick
Miniature Type 1 1/16″ X 3/16″ X 1/4″ Wide Gap Option 17
Mini Surface Mount 1/2″ X 1/4″ Ideal for Tight Fit Windows

Hidden Screw & Wires
Surface Mount 2 ″ X 1/2″ X 3/8″ 1″ Gap 16

Free Spacers, Screws, Cover
Standard Surface 2 1/2″ X 1/2″ X 1/2″ Std Gap 7/8″ 15
Mount Wide Gap Option

"We Contact The World"

®

800-852-5050

E-MAIL: [e-mail]

516-328-3351

FAX: [phone]

STYLE SIZE FEATURES PAGE

SM-20

Strobe

B Connectors

Sirens

Speakers

BNC Connectors

Coax Crimp Tool Kit

SM-35

GP-23

Tane 40/45

MET-44

Tane-66

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 4

5•TANE

"We Contact The World"

®

800-852-5050

E-MAIL: [e-mail]

516-328-3351

FAX: [phone]

Tane Upscale Multi-Fuction
Utility Tool with Free Pouch Multi-Function Utility Tool 31

Tane Plug-in
Tr ansformers Standard Size 12V, 16.5V, 24V 31

Water Sensor 21/2″ X 1/2″ X 1/2″ Water Sensor with Leads
Accessories Standard Size Magnets, Reeds, Plugs, Relays 30

Accessories Electrical Tape, Tie Wraps 28

White, Brown, Gray
Push Pull 1″ Each Side Corrosive Resistant 28
Disconnect Tension Relieve Hole

Ground Clamp Standard Size Easy to Use 28

Copper with SS Bolts

RJ 31 Block Standard Size Complete with 18″ Cord 28
and Cord

Jambstick Standard Size Won’t Harm Drill Bit 29

PIR-360A Ceiling Mount 360° 25

STYLE SIZE FEATURES PAGE

PIR 360A

Telephone Block

Ground Clamp

PPD 11

Accessories

Jambstick

Tane WS-1

NEW

Product

3 Sharpened Spade Bits
Var ious Bits Many Sizes Bell Hanger Bits 29

Long Flexible Bits

Tane Transformers

Tane Utility Tool

TANE Safety Flash

Paddle Bits

IR-2026 Passive Infrared Detector
IR-2026Q Three Styles Quad Style Infrared Detector 26
IR-25120 Digital Pet Immune

PIR’s

NEW

Products

SD-1, SD-2 Four Styles Single and Three Zone Analuzers 27
SD-3, SD-4 Flush & Surface Mount Shock Sensors

Shock Sensors

NEW

Product

Cable &Wire Two Styles Cable &Wire Raceway for 27
Raceway Low Voltage Applications

E-Z DUC-IT Raceway

NEW

Product

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 5

Tane Safety Flash Battery Operated Safety Flash 31
Tane Safety Flare Battery Operated Safety Flare

ø10.9

.937″

.25

0.98″

ø9.25

0.43″

Insert
Wires
Here

ORDERING INFORMATION

Size:

3

/8″ Diameter x .98″ Length

Gap:

5

/8″ to 1″

•For Fast and Easy Installation
— No more soldering or splicing needed
— No need to push beanies behind walls

through small holes

Shorter magnets .57L sent as a standard

Closed Loop Closed Loop

5

/8″ Gap 1″ Gap

STB - 3/8 TC STB - 3/8 TC

(comes with

3

/8″ x 9/16″ (comes with bare

standard magnet)

3

/8″ x 3/4″ magnet)

(Above available with smaller or bare thin magnets for applications in
tight fitting window frames)

6•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

STB - 10 • 3/8″ x 3/4″ Stubby Type

• The “Stubby” recess is ideal for
those who do not need to spend
extra money on the Mini Recess.

ORDERING INFORMATION

For Tight Fit Windows

Closed Loop Closed Loop Closed Loop Open Loop For Bare Extra

.7″ Gap

1

/2″ Gap 11/4″ Gap

1

/2″ Gap Magnets Mag

STB-10

STB-10 W STB-10 WG

STB-11

Specify

STB-10 Mag

MINI - 10 Mag B

3

/8″ x 3/4″ Size

Need Any

Beanies?

Crush Resistant and Sensitive

Tane uses a sensitive long leaded - no stick Rhodium reed to attract the
magnetic field. This is protected by a crush resistant plastic housing.

Solder points

Crush resistant button

Mini Mag available for tight fits.

STB - 3/8 TC • 3/8″ Recessed Terminal Quick Connect

RECESSED CONTACTS

QUICK TERMINAL CONNECTORS

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 6

RECESSED CONTACTS

7•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

ORDERING INFORMATION

For 3/8″ Flange

TAP - 10 • 3/8″ Diameter Contact and Magnet

Gap:3/4″ - 11/2″
Size:

3

/8″ Diameter x 11/4″ Length

#22 AWG, 18″ standard leads (long leads available)

Closed Loop Closed Loop Open Loop

S.P.D.T.

Closed Loop Closed Loop Open Loop

3

/4″ Gap 1″ Gap

3

/4″ Gap 1 1/2″ Gap

3

/4″ Gap

3

/4″ Gap

TAP - 10 WG

TAP - 10

Incher

TAP - 11 B TAP - 12 C (w/Bare

3

/8″ x 3/4″ TAP - 10 FM TAP - 11 BFM

Tap-10

Magnet)

Available in Brown or White Add “R” for Resistor + Value

*Available with a Bare Magnet of any size*

Try Our Beanies

MINI-10 • 3/8″Mini-Recess Types

( A True Miniature Size)

Size:

3

/8″ x 5/8″ Mini - 10

Gap:

1

/2″ to 1″

22 AWG, 18″ Length Min.

• Ideal for tight fit windows

• Good for thin door frames

• Excellent for security screens

• Long leads available

• Shorter than all stubby contacts

• Versatile

• White or Brown

ORDERING INFORMATION

Size

Closed Loop Closed Loop Closed Loop

1

/2″ Gap

3

/4″ Gap 1″ Gap

Mini-

3

/8″ Mini-10

Mini - 10 w/

Mini - 10 WG

STB - 10 Mag

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 7

STB-10 DM • Recess Contact with Thin

1

/8

″

Magnet

Gap:

1

/2″

Contact:

3

/8″ x3/4″

Magnet:

3

/8″ x 1/8″

• Ideal for tight fitting window frames where
you can not drill a hole for magnet

• Convex hole fits flat head screws flush!

For very wide gap:

Use Bare

3

/8″ x 3/4″ Wide Gap Magnet

Part Number STB - 10 WG
Gap: 1

1

/4″

MINI-10 DM • Mini Recess with

1

/8

″

Tight Fit Magnet

•

The Mini -10 DM is ideal where not only the magnet is tight
for space, but also where the contact must be smaller

•

Tane’s

3

/8″ x 1/8″ powerful magnet has a convex hole drilled

so a flat head screw fits flush !

For very wide gap:

Use Bare

3

/8″ x 3/4″ Magnet

Part Number MINI - 10 WG
Gap: 1

″

Gap:

3

/8″

Contact:

3

/8″ x 5/8″ Mini

Magnet:

3

/8″ x 1/8″

ULTIMATE TIGHT FIT

8•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 8

RECESSED CONTACTS

9•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

3

/4″ Terminal Connect Recessed

Steel Door Recess Type

Ta ne - 3/4 TC: 3/4″ Diameter x 13/16″

•For fast and easy installations
— No more soldering or
splicing needed

• Stubby magnet 3/4″ x .85″

Ordering information

Closed Loop Open Loop Closed Loop

1″ Gap

3

/4″ Gap

3

/4″ Gap

TANE - 3/4 TC TANE - 3/4 BTC TANE - 3/4 TC w/TAP-10 MAG

Tane will substitute short magnets
when requested

(This is with

3

/

8

″ press fit magnet)

Insert Wires

Here

Ordering information

3

/4″ and 1″ Diameter Contact and Magnet (Steel Door) SD-70 /SD80

• Rugged one piece construction

(No need for extra donut adapters)

• For standard and tighter
fitting applications

• Sensitive “No stick” UL rhodium reed

• Long leads bent to keep solder off the
glass of the reed

• Two Solder points on 22 AWG 7
stranded UL Wire

• Thick plastic shell to prevent crushing

Size Closed Loop Open Loop SPDT Closed Loop & Bare Magnet

3

/4″ Dia x .80 SD - 70 SD - 71 SD - 72 SD - 70 WB 3/8″ x 3/4″ Magnet

1″ Dia x .80 SD - 80 SD - 81 SD - 82 SD - 80 WB 3/8″ x 3/4″ Magnet

Available in Brown or White,
18″ Leads - 22 AWG, Long Leads Available
Add “R” for Resistor + Value

3/8″ Press Fit Magnets Available

Ordering information

Stubby Press Fit Contact

Size:1/2″ x 3/4″ GAP: .75″

• 1/2" Diameter meets needs where 3/4" is
too wide and 3/8" hole is too small.

• Available w bare or encapsulated mags

• 18" 22AWG wire standard, longer available

Closed Loop Bare 1/4" X .79" mag .75 Gap : TANE-05

Open Loop Bare 1/4" X .79" mag .70" Gap: TANE-06

Closed Loop Ultra Thin Donut Mag .50 Gap: TANE-05DM

Open Loop Ultra Thin Donunt Mag .50 Gap: TANE-06DM

Need Any

Beanies?

TANE-05

TANE-05 DM

Specify WH for White or BR for Brown

New Stubby Style with 1 1/2″ Gap

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 9

RECESSED CONTACTS

10•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Ordering information

TANE-22 • 3/4″Stubby “Button Ball” Reed Contact

Style Closed Loop Open Loop S.P.D.T.

Wire Leads (18″ std) TANE-22 TANE-23 TANE-24

Te r minal Connect TANE-22TC TANE-23TC TANE-24TC

The TANE-22 series is available with 18″ leads or
a quick connect model for faster installations.

• Complete with Spacer and Screws

• Shorter length for tight fitting areas

Length

3

/4″ from Flange to end on

leaded TANE-22

Length 1

3

/16″ from Flange to end of

terminals for TANE-22TC

TERMINAL CONNECT

LEADED MODEL

RB - 32 • 3/4″Roller Ball Reed Contact

This

3

/4″

roller reed ball contact uses a special
compressed plastic ball to keep it dirt and paint
resistant.
Standard Size

3

/4″

x 1

5

/8″

• Complete with spacers and screws

• Thin end for easy installation

• De-activated Rhodium reed switch used

Ordering information

Closed Loop Open Loop S.P.D.T.

RB-32 RB-33 RB-34

Complete with Screws and Spacer

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 10

RECESSED CONTACTS

11•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TANE 3/8 ASH & RECESSED CONTACTS

Reed Plunger • PB-52 & PB-52 TC

PB-52 TC

PB-52

(45mm)

1.83”

(34mm)

1.39”

(Ø 12.8mm)

.52”

(45mm)

1.83”

(44mm)

1.79”

(Ø 12.8mm)

.52”

TANE 3/8 ASH (Adjustable Screw Head)

To order specify White or Brown

Tamper Switch with Gap

Adjusting Screw.

Unit: mm

Ordering Information

Closed Loop Open Loop

Tane 3/8 Ash Tane 3/8 Ash

O.C.

To order specify White or Brown

Ordering Information

Wire Leads Terminals

Closed Loop PB-52 PB-52TC

Open Loop PB-53 PB-53TC

• Ideal for replacing old mechanical contacts

• Good for door jams

• Reed technology for long life

• PB-52 with 18″ leads

• PB-52 TC with terminal connects

• Complete with screws & spacers

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 11

12•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TAP - 15 • 1/4″ Diameter Contact and Magnet

RFM - 25 •

1

/4″ Diameter with Oval Flange and Magnet

Ideal for fitting in a track where a
regular

1

/4″ would fall through

Gap:

3

/4″ (see above for variations)

Size:

1

/4″ Diameter x 1″ Length

Magnet:

1

/4″ Diameter x 1″ Length

Flange:

3

/8″ Oval Shape

Wire: 22 AWG,

18″, Longer Available

Ordering Information

Closed Loop Open Loop S.P.D.T. W ider Gap

RFM - 25 RFM - 26B RFM - 27C WG

Gap:

3

/4″

Size:

1

/4″ Diameter x 1″ Length

Magnet: Magnet

1

/4″ x .79″ Length

Ordering Information

Closed Loop Open Loop S.P.D.T. W ider Gap

TAP - 15 TAP - 16B TAP - 17C

WG

Shorter

Magnet

Available

Gap Variations

3

/8X 3/4MAG

3

/4″

5

/8″

1″

RECESSED CONTACTS

Available in Brown or White
#22 AWG, 18″ Standard Leads, Longer Available

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 12

RECESSED CONTACTS

13•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TANE MINI- DISC • Ultimate Thin Tight Fit Contact and Magnet

MINI - 15 •

1

/4″ Diameter Contact and Magnet

The Tane Mini-Disc is a unique contact as
it has a wide gap for its slim size

Gap: up to .70″ (18mm)
Dimensions: .60″ (15mm) x .24″ (6mm)

Flange is .71″ (18mm)

22AWG: 18″ in length

Gap:

1

/2″

Size:

1

/4″ X 9/16″

Magnet:

1

/4″ x .54″

22 AWG, 18″ Length
26 AWG, 18″ Length

• Ideal for Screens

• White or Brown

Ordering Information

Closed Closed

Size

1

/2″ Gap

3

/4″ Gap

Mini

1

/4″ Mini-15

Mini-15

w/Bare

1

/

4

″

x .79

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 13

SURFACE MOUNT CONTACTS

*with special adhesive

FM-102 • Flange Mount Contact and Magnet (Side Leads)

FM 106 • Flange Mount Contact and Magnet (Center Leads)

14•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

FM: Flange Mount with special adhesive
Size: 1.33

″ L x .3″ W x .53″ H

Gap: 1

″ minimum

Ordering Information

Closed Loop Open Loop S.P.D.T. Vent Mag

FM-102 FM-103 FM-104 FM-Mag

Brown or White, 18″ Leads minimum (Longer Available)

This is our most economical surface mount with
leads

FM: Flange Mount with

special adhesive

Size: 1.33

″ L x .3″ W x .53″ H

Gap: 1

″ minimum

Ordering Information

Closed Loop Open Loop Vent Mag

FM-106 FM-107B FM-Mag

Brown or White, 22 AWG,

18″ Leads minimum (Longer Available)

*Special Adhesive on back

FM-106 has a “Clean Break”

Flange Removal

Try Our Beanies

Tane Catalog 2006.qxd 8/3/06 8:51 AM Page 14

SURFACE MOUNT CONTACTS

*with special adhesive

TANE-60 • Q.C. Quick Connect

15•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Features:

• Screw Down or Super Adhesive

• Break Away Features for Tight Fit

• Slim Style and Installer Easy

• Eliminates Need for 6' or 10' Leads

• TAPE Cover

Gap:

3

/4″ minimum

Colors: White, Brown and Grey
Carry Current: 1 Amp
Reed: De-activated Rhodium
Dimensions: L: 2″ xH:

3

/8″ xW:1/4″

Ordering information

Closed Loop Open Loop Extra Mag Closed Loop Wide Gap

TANE-60 TANE-61 TANE-60 Mag TANE-60 WG

$50:1 Lifetime Guarantee

TANE-50 • Covered Screw - Quick Connect

The TANE-50 is quick, clean looking, and easy to install!

Gap:3/4″ minimum
Colors: White, Brown, and Grey
Reed: De-activated Rhodium

Ordering Information

Closed Loop Open Loop Extra Mag

TANE-50 TANE-51

TANE-50 Mag

Comes complete with screws, covers, & adhesive.

Only

Housing

Dimensions

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 15

Closed Loop Open Loop Extra Mag

1″ Gap GP-23 GP-24 GP-23 MAG

SURFACE MOUNT CONTACTS

16•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

SM-35 • Surface Mount* (Standard Industry Size)

Ordering Information

Gap: 1″ to 2″.
Color: White, Brown, Grey.
Size: 2

1

/2″ x 1/2″ x1/2″

Price includes spacers, screws, and cover -

NO SEPARATE PARTS

Closed Loop Open Loop S.P.D.T. for 1

3

/4

″ Gap for Resistor

SM - 35 SM - 35 B SM - 35 C add W.G. add “R”

SM-35 is available in 2″ gap. The SM-35 WG is
economical and ideal for heavy steel doors and
commercial wide gap needs.

Ordering Information: Add WG for Wide Gap

TANE GP-23 • Hidden Screw — Hidden Wire — Surface Mount

All screws are hidden and all wires can be hidden in this
unique contact.

Gap: 1″ (25mm) Standard
Color: White, Brown, and Grey

Size:

L: 2″(51mm) x H: .1/2″(13mm) x W: .3/8″(9mm)

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 16

Size: 1.4″ L x .31″ W x .31″ H
Gap: .75

″

Color: White, Brown

SURFACE MOUNT CONTACTS

*with special adhesive

SS-40 • SUPER STICK Contact and Magnet

17•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Ordering Information

Closed Loop Open Loop S.P.D.T. Vent Mag

SS-40 SS-41B SS-42C SS-40 Mag

22 AWG, 18″ Leads minimum (Longer Available)

TANE-45 • SUPER STICK Miniature Type

The TANE-45 is ideal for areas where a small or slim
contact is needed.

MODEL TANE-45 has super adhesive that does not
fall off, dry-off, or freeze-off.

Size: 1

1

/16″ L x 3/16″ W x 1/4″ H

Gap: .60

″

Color: White, Brown, or Grey
#22 AWG, 18″ Minimum
Long leads available

• Closed Loop

•

Can be installed in the track of the
window or surface mounted.

• Ideal for tight fit windows where a
large gap is not needed

• Perfect for windows that
can not be drilled due to
warrantee issues

Size:

1

/2″ L x 1/4″ W

Gap:

3

/8″ “Fits on a dime”

Color: White, or Brown

Ordering Information

Closed Loop Vent Mag

Tane - 45 Tane - 45 Mag

$50:1 Lifetime Guarantee

TANE MICRO • Ultra Mini Surface Mount Count

.314" (8mm)

.314" (8mm)

.157"
(4mm)

.472" (12mm)

.669" (17mm)

.157"

(4mm)

.472" (12mm)

.669" (17mm)

Magnet
Assembly

Contact
Assembly

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 17

SURFACE MOUNT CONTACTS

18•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

MET-44 • Overhead Door Contact

Ordering Information

• Small size with special push-pin that insures
cable never comes out of switch side

• Adjustable “L” bracket, magnet can be installed
10 ways!

•Armored cable in 18″ or 36″ size

• Beats industry standards!

• UNIQUE FEATURE: Besides epoxy, TANE uses a

unique pin to hold the cable in place forever.

Closed Loop Closed Loop Open Loop S.P.D.T.

18″ Cable 36″ Cable 18″ Cable 18″ Cable

MET - 44 - 18 MET - 44 - 36 MET - 45 - 18 MET - 46 - 18

TANE-66 • Track Mounted Over Head Door Contact

•For Mounting on Door Tracks

"Fork lifts can’t knock these off floors!"

•4 way adjustable magnet bracket

• Wider Gap for reduced false alarms

• Installs better and faster than standards overheads

• Armored cable is standard

• Closed Loop, open loop and SPDT types

Ordering Information

Closed Loop Open Loop S.P.D.T.

TANE-66 TANE-67 TANE-68

NEW

Product

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 18

SURFACE MOUNT CONTACTS

19•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

MET-200 • Commercial Metal Contact

Wide Gap: 11/4″

Size: 2″ L x

5

/8″ H x 3/8″ W

Wire: 22 AWG,18″ length wire, armored

cable available.

Ideal for commercial applications and

where a wide gap is needed.

ORDERING INFORMATION

Closed Loop Open Loop

MET - 200 MET - 201

MET - 200AR for Armored Cable MET - 201 AR

Ordering Information

SM-20 WG Commercial Surface Mount

• Ideal for commercial or steel doors

• Wide gap to insure against swinging

• 18″ 22 AWG leads

Wide Gap: 2

1

/2″

Size: 4

1

/8″ L x 5/8″ H x 5/8″ W

Color: White, Brown & Grey

Closed Loop Open Loop

SM - 20 WG SM - 21 WG

Need Any

Beanies?

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 19

*

BEANIES *MINI-SURFACE MOUNT

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

B Connector (Dry & Silicone Filled)

Materials:
Outer Shell: Plastic Type

Heat Shrink Tubing

Metal Housing: Brass
Inner Sleeve: Beryllium Copper plated

with Bright Nickel

Contact Resistance: 10 milliohms initial
Dielectric: 1000 V
Strength of Joint: 9 lbs.

Mini Strobe Light - Very Bright, Long Life (LED Version Now Available)

• Low Current

• Red, Yellow, Clear & Blue

• Bright

• Water Tight

• Low Cost

• Standard 12V*

*6V and 24V are available

upon request

200 MA

180 MA

20•TANE

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 20

TANE BOX WSPR66A • 20 Watt Stainless Steel Box with Dual Tampers

and Dual Tone Siren

SIRENS

21•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TANE SCS 101 • (UL Listed) Self Contained Dual Tone Indoor Siren

Specifications:

• Housing Material:
Stainless Steel with Dual Reed
Ta mp ers

• Speaker Type:
Voice coil impedance—8 ohm

• Rated Input Voltage: 12Volts DC

• Range Voltage: 6-15VDC

• Sound Level: 115db/m

• Current Draw:
280mA @ 12VDC 8 ohm load

• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle

• Operating Temp: -20°C to 60°C

• Dimensions:

5.67″ H x 5.63″ W x 4″ D
(144mm x 143mm x 100mm)

• Color: Stainless Steel

Specifications:

• Housing Material: ABS Plastic

• Speaker Type:
Voice coil impedance—8 ohm

• Rated Input Voltage: 12Volts DC

• Range Voltage: 6-15VDC

• Sound Level: 110db/m

• Current Draw:

400mA @ 12VDC 8 ohm load

• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle

• Operating Temp: -20°C to 60°C

• Dimensions:

4.3″ H x 4.3″ W x 2″ D
(108mm x 108mm x 56mm)

• Color: White

Specifications:

• Housing Material:
ABS Plastic

• Speaker Type:
Dual Tone Siren Horn

• Rated Input Voltage:
12Volts DC

• Range Voltage: 6-15VDC

• Sound Level: 115db

• Speaker Type: Horn

• Power Rating: 15 watts

• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle

• Operating Temp:

-20°C to 60°C

• Dimensions:

5.2″ diameter x 5.90″L x 5.2″H
(132mm x 150mm x 132mm)

• Color: White

TANE SIR 202 • (UL Listed) Self Contained Siren Horn

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 21

22•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TANE SPK 202 • Speaker Horn

TANE SIR 508 • 30 Watt 5 x 8 Electronic Siren

Specifications:

• Housing Material: ABS Plastic

• Speaker:
Voice coil impedance—6 ohm

• Speaker Type:
Horn

• Input Power Rating:
15 watts max.

• Sound Level:
115 db

• Operating Temp:

-20°C to 60°C

• Dimensions:

5.2″ diameter x 5.90″L x 5.2″H
(132mm x 150mm x 132mm)

• Color:
White

Specifications:

• Housing Material: ABS Plastic

• Speaker Type:
30 Watt Dual Tone Siren

• Rated Input Voltage:
12Volts DC

• Range Voltage: 6-15VDC

• Sound Level: 120db

• Current Draw:
1500mA @ 12vdc

• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle

• Operating Temp: -20°C to 60°C

• Dimensions:
5″H x 8″W x 9″D
(127mm x 203mm x 229mm)

• Color: White

Specifications:

• Housing Material: ABS Plastic

• Speaker Type:
Voice coil impedance—8 ohm

• Rated Input Voltage:
12Volts DC

• Range Voltage: 6-15VDC

• Sound Level: 100db

• Current Draw:
400mA @ 12VDC 8 ohm load

• Tone Frequency:
Steady—1200HZ
Warble—800HZ to 1200HZ
1 second ramp cycle

• Operating Temp:

-20°C to 60°C

• Dimensions:

4.3″ x 4.3″ x 2.″
(108mm x 108mm x 56mm)

• Color: White

TANE SIR 5FL • Flush Mount Dual Tone Indoor Siren

SIRENS & SPEAKERS

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 22

SPEAKERS

23•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TANE SPK 5FL • (UL Listed) Flush Mount Speaker

TANE SPK 508 • 30 Watt 5 x 8 Speaker/Horn

Specifications:

• Housing Material:
ABS Plastic

• Speaker:
Voice coil impedance—8 ohm

• Speaker Type:
Cone

• Input Power Rating:
15 watts max.

• Sound Level:
110db

• Dimensions:

6.4″ x 5.04″ x 1.61″
(163mm x 127mm x 41mm)

• Color:
White

Specifications:

• Housing Material:
ABS Plastic

• Speaker:
Voice coil impedance—8 ohm

• Speaker Type:
Horn

• Input Power Rating:
30 watts max.

• Sound Level:
120db

• Dimensions:
5″ x 8″ x 9″
(108mm x 108mm x 56mm)

• Color:
White

Specifications:

• Housing Material:
ABS Plastic

• Speaker:
Voice coil impedance—8 ohm

• Input Power Rating:
15 watts continuous
20 watts peak

• Sound Level:
110db/m

• Dimensions:

4.3″ x 4.3″ x 2.″
(108mm x 108mm x 56mm)

• Color:
White

TANE SCH 101 • (UL Listed) Speaker

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 23

ALARM PRODUCTS

TANE Coax Crimp Tool Kit

BNC Connectors

24•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Magnetic
Contacts

Since 1985

Die#

PIN SQ PIN

For Crimping Coax (RG) Type Cable

336C2 .360″ .324″ .262″ .068″ 6,59

9.14 8.23 6.65 1.72

336C .319″ .256″ .213″ .068″ 6,59,62,140,210,Belden 8279.
DIE 8.1 6.5 5.41 1.72 55,58,141,142,223,303,400,Fiber Optic.

336G .255″ .213″ .137″ .100″ .068″ .043″ 59,62,8X,140,210,Belden 8279.
DIE 6.48 5.41 3.48 2.54 1.72 1.09 55,58,141,142,174,223,303,400,Fiber Optic.

236PA .324″ .255″ .213″ .100″ .068″ 6,58,59,62
DIE 8.23 6.48 5.41 2.50 1.72

336K .429″ .128″ .100″ 8,9,11,87A,149,165,213,214,216,226
DIE 10.9 3.25 2.54 393,174,179,187,188,316,Belden 9913.

206 61/2″ CABLE CUTTER FOR CUTTING CABLE MAX. .41″ø (10.5mm ø)

332 4″ L COAX STRIPPER FOR STRIPPING RG58/59/62/63C2V…

TN-CRIMP TOOL KIT

2-PC. BNC Plug W/3 Ferrules

TN5088-2X
(RG-58,59,59TFE,6)

RCA Female to BNC Male

TN50AD515

Twist-On Right Angle Plug

TN50RA2
(RG-59 & RG-62)

BNC Jack to Jack Barrel

TN50AD555

Twist-On BNC Plug

TN50UG882
(RG-59 & RG-62)

BNC Right Angle Plug to Jack

TN50AD503

Twist-On Right Angle Plug

TN50RA2
(RG-6)

BNC T Connector
Plug to Jack

TN50AD505

Twist-On BNC Plug

TN50UG885
(RG-6)

2-PC Right Angle Plug W/3 Ferrules

TN50R-2X
(RG-58,59,59TFE,6)

“F” Female-BNC Male

TN50AD516

BNC Jack T Connector

TN50AD506

Includes

Free Screwdriver

Includes the Following

• Carrying Case: Black Plastic

• Coax Crimp Tool & 5 Die (336C2,

336C, 336g, 236PA, 336K):

Ratchet Type w/Interchangeable Die

• Cable Cutter:

For cutting cable upto .41” (10.5mm)

• 4” L Coax Stripper:

Strips RG 58/59/62/6/3C2V

• Bonus “Free” Screwdriver:

Phillips Type

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 24

CEILING MOUNT PIR DETECTOR

25•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

TANE's PIR-360A is an innovative 360° ceiling mount passive infrared
detector with outstanding performance and supreme reliability that meet
demands of all kinds of professional installation. The PIR-360A is
manufactured under restrict quality control standard & backed by Tane’s
5 year warrantee.

Specifications

Detection Patterns

PIR-360A 360˚Ceiling Mount PIR Detector

NEW

Product

Detection Method: Passive Infrared
Coverage: Diameter 7m (23 feet)
Detection Zones: 31 Dual Beam
Recommended Mounting Height: 2.5m
Temperature Compensation: Thermistor
Alarm Duration: 1 second minimum.
Alarm Output: Dry Contact N.C. 500mA 200Vdc
Tamper Switch: Dry Contact N.C. 3A, 200Vdc
Pulse Count: Selectable (1, 2 or 3)
Warm-Up Period: 90 seconds
Input Voltage: 9 - 16Vdc
Current Consumption: 15mA@12V (standby)
Reverse Polarity Protection: Diode
Fire Protection: ABS
Weight: 170g

Top View

7m

23 ft

Features

• 7m/23’ diameter range

• Thermal optic stabilization cavity

• Temperature compensation

• PCB shielded against RFI

• Superior RFI/EMI immunity

• Alarm indication channel

• Selectable LED activation

• Ceiling mount detector

Max. Detection Range (at 25°C)

Mounting Height

m 2.7 3.0 3.3 3.6

(ft.) (9) (10) (11) (12)

Detection Range

m6 x 6 8 x 8 10 x 10 11 x 11

(ft.) (20 x 20) (26 x 26) (33 x 33) (36 x 36)

Tane Catalog 2006.qxd 8/3/06 8:52 AM Page 25

26•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Tane IR-2026 aesthetic curved design, the 2026 PIR is the
installer’s choice for a professional, hassle-free installation. A
good solution for domestic and small commercial applications.

Features

• 14m x 14m/ 46’ x 46’ coverage

• Superior RFI, EMI, ESD and lightning protection

• PCB easy lock

• Thermal optic stabilization cavity

• 1, 2 or 3 selectable pulse count

• Easy view LED

Tane’s 2026Q and TANE IR-25120 Digital Pet Immune are part of our intelligent, ultra-reliable
family of detectors with look-down zone. They offer superior RFI, EMI, ESD and lightning protec­tion. With super immunity package the Tane’s quad sensors are able to withstand the most hos­tile environmental conditions. Moreover, our Full Area Vision pet immunity (TANE IR-25120) and
adaptive temperature compensation technologies achieve superior false alarm immunity in any
type of residential or commercial installation.

Tane IR-2026Q

• 15m x 15m/ 50’ x 50’ coverage

• Superior RFI, EMI, ESD and light-

ning protection

• Super immunity

• Selectable pulse count

(1,2 or 3)

• Remote Led enable/disable

• Thermal optic stabilization

cavity seal

Tane IR-25120 Digital Pet Immune

• 11m x 11m/ 35’ x 35’ coverage

• Animal/ pet immunity – 25lbs

• Microprocessor signal

analysis

• Digital adaptive temperature com-

pensation

• Excellent RFI, EMI, ESD and light-

ning protection

• Adaptive interval pulse count

Technical Specifications TANE IR-2026 TANE IR-25120 Digital Pet Immune TANE IR-2026Q

Operating Voltage 9-16Vdc 9-16Vdc 9-16Vdc
Current Consumption 15mA@12V (standby) 17mA@12V (standby) 17mA@12v (standby)
Alarm Duration 1 sec. Min. 2 sec. 1 sec. Min.
Pulse Count 1,2 or 3 1 or 2 1,2 or 3
Sensor Dual Element Dual Element Quad Element
RFI Immunity 30V/m up to 1 GHz 40V/m up to 1GHz 40V/m up to 1Ghz; 12,000 lux
Alarm Output Normally Closed Normally Closed Normally Closed
Tamper Switch Normally Closed Normally Closed Normally Closed
Temp. Compensation FTC Adaptive FTC
Dimensions 11.4 x 6 x 5cm (4.5 x 2.4 x 2") 11.3 x 6.4 x 4.5cm (4.3 x 2.5 x 1.8") 11.3 x 6.4 x 4.5cm (4.4 x 2.5 x 1.8")

PASSIVE INFRARED

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 26

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 27

NEW

Product

SHOCK SENSORS

MA-350 CQR MA-350 is a 3 zone shock analyzer with tamper and output relays.
&
MA-100T CQR MA-100T is a universal single zone shock sensor analyzer which uses the well

proven time/pulse integration system. Both features a widerange sensitivity control, auto­reset alarm relay and indicator. The analyser may be located within an alarm control panel
or mounted externally and has a micro-switch cover removal tamper. MA-350 may be used
to supervise up to 15 shock sensor modules and 10 on the MA-100T.

SD-1 CQR Flush mounted shock sensor - N/C Contacts. Requires analyzer.

SD-2 CQR Surface mounted shock sensor. (2 terminal) Can be mounted horizontal or

vertical N/C Contacts. Requires analyzer.

SD-3 CQR Surface mounted shock sensor. (4 terminal) Can be mounted horizontal or

vertical N/C Contacts. Requires analyzer.

SD-4 CQR Surface mounted shock sensor. (4 terminal w/ mag. contact) Can be mounted hori-

zontal or vertical N/C Contacts. Requires analyzer.

E-Z DUC-IT CABLE & WIRE RACEWAY

NEW

Product

E-Z DUC-IT is Tane's new product line of cable and wiring raceway for low voltage applications.
Available in two sizes. A variety of connectors are available in connector combo-pack. Tane's E-Z
DUC-IT product line is available in white or brown.

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

"We Contact The World"

®

The Best Guarantee Since 1984 : $50-1

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

27•TANE

TAPE • TIE WRAPS • ACCESSORIES • DIS-CONNECTS

28•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

The PPD-11 (Push Pull Disconnect)

is back due to popular demand!

Telephone Block and 18″ Cord

Tie Wraps:

8 inches TY-8

Electrical Tape

• Durable and Strong

• UL Approved

• Available: White or Black

Packaged in sleeves of 10 rolls

Electrical Tape

Electrical Tape

Electrical Tape

This is a 2 wire connector with holes to either mount it, or
run the wire through to take the pressure off the wires.

Available: White, Brown, or Grey

Telephone Block & Cord:

Type Part Number

RJ31 TJ-8 (This is an 8 wire block)

Call for volume and distribution pricing. UL Approved

Ground Clamp

This standard ground clamp should be used for
grounding all systems.

Brass with SS bolts

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 28

THE JAMBSTICK

Insert 1/4 side of Jambstick. Select proper drilling angle, for basement
and crawl space runs, angle bit inward and away from perimeter floor
plate, for under carpet runs, angle bit under shoe molding.
Insert 3/8 end of Jambstick. Using a 3/8, bore out inner cavity for
additional room for wire and connectors. If additional room is needed,
slightly rotate Jambstick and repeat.

ACCESSORIES

29•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Bits of All Types

Paddle Bits

1/4″ X 6″
3/8″ X 6″
1/2″ X 6″
5/8″ X 6″
3/4″ X 6″

1″ X 6″

Bell Hangers

Long Flexible Bits

1/4″ X 12″
1/4″ X 18″
1/4″ X 24″
3/8″ X 12″
3/8″ X 18″
3/8″ X 24″

1/4″ X 24″ 1/4″ X 54″
3/8″ X 24″ 3/8″ X 54″

Paddle Bits, Bell Hangers and Long Flexible Bits

Call for Distributor or Large Volume Pricing on anything we produce.

All Tane Bits are made with the highest quality commercial grade
material to give you value for your money.

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 29

Rhodium Reeds

Bare reeds are available in 1-A, 1-B or 1-C. (See page 2 for a description on the

manufacturing process of the best rated reeds made today)

Contact Standard High Voltage High Power S.P.D.T.

Contact resist. (Initial) [m-ohms] 150 max. 150 max. 150 max. 150 max.
Breakdown voltage [DVC] 250 min. 300 min. 300 min. 200 min.
Insulation resistance [ohms] 1010min. 1010min. 10

10

109min.
Electrostatic cap [PF] 0.3 max. 0.2 max. 0.5 max. 1.5 max.
Contact capacity [VA] 10 20 70 3
Max. Conductive curr. [A] 1.0 2.0 2.5 0.5
Max. voltage [V] 100 250 100 30

CONTACT RATINGS

TAP contacts are available with different electrical characteristics for unusual requirements

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

"We Contact The World"

®

MATERIALS:

Outer Shell: Plastic Type

Heat Shrink Tubing

Metal Housing: Brass
Inner Sleeve: Beryllium Copper plated

with Bright Nickel

ACCESSORIES

Magnets

Pre-Wire Plugs Relays

B - Connector

(Dry & Silicone Filled)

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Call for Stock Sizes & Prices.

Available Bare and Encapsulated.

Cheap and reusable in Brown and White

Contact Resistance:

10 milliohms initial

Dielectric: 1000 V
Strength of Joint: 9 lbs.

3

/8″ Plug

3

/4″ Plug

1 Pole to
4 Poles,
Milliamps
to 30 amps

Call for more
information.

Color: White
SIZE: 2

1

/2″L x 1/2″W x 1/2″H

30•TANE

TANE-WS 1 - Water Sensor with Leads

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 30

ACCESSORIES

31•TANE

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

QUALITY ASSURANCE DUE TO DE-ACTIVATED RHODIUM PLATED REEDS

The Best Guarantee Since 1984 : $50-1

"We Contact The World"

®

Specifications:

• Primary: 120 Volt 60 Hz Screw
Te r minals

• Housing Color - White

• Class II Plug in Transformer

• Great for Alarm & CCTV Applications

• TN 1220 12 Volt AC, 20 VA

• TN 1240 12 Volt AC, 40 VA

• TN 1620 16.5 Volt AC, 20 VA

• TN 1640 16.5 Volt AC, 40 VA

• TN 2420 24 Volt AC, 20 VA

• TN 2440 24 Volt AC, 40 VA

TANE Plug-in Transformers

Includes the following:

• Pliers/Cutters/Crimper

• Pull Out Blue LED Light

• Knife

• Flat Head Screwdriver

• Phillips Head Screwdriver

• Ruler

• Corkscrew

Features:

• No Flame

• Water Resistant

• Takes 3 "AA" Batteries
(Not Included)

• 40 Hour Continuous Life

• Reusable Over and Over

• Bright Flashing Light

TANE Upscale Multi-Function Utility Tool with Free Pouch

Features:

• Ideal and safe for automobile
breakdowns or as an attention getter.

• High Visibility: Can be seen
over 1/2 mile away at night.

• Safe: No risk of burning yourself as with
normal road flares.

• Long lasting: Will not rot in your trunk
like normal road flares do.

• Water resistant.
Each unit tested in water.

• Makes great corporate of personal gift.

• 90 flashes per minute.

• Uses two ‘D’ cell batteries.

• Long Lasting.
125 hour average.

• Durable Each unit drop tested
from 4 feet,

• Bright Yellow Body, Amber Lens &
Orange Base for easy visibility
during the day.

• Easy and safe to use for
traffic control.

• Good fund raising project.

TANE Safety Flash – “When You or a Loved One Must Be Seen”

TANE Flasher Safe-t-flare Electronic Road Flare

NEW

Product

NEW

Product

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 31

Free Samples Upon Request

Distributors Inquiries Welcome

The Best Guarantee Since 1984: $50-1

What the above means is that we guarantee NO STICKING and NO FALSE ALARMS. If during the normal
use of TANE (TAP) contacts, you have a false alarm, we will replace the defective switch with $50 in credit
upon return of the defective switch. (If contact fails at installation we will replace it with $20
in credit, after-installation $50). This warranty is good for the life of the installation, but does not cover
sticking due to high voltage surges or lightning. (For such a rare occurance TANE will replace that contact
two for one.) The reason for such a strong warranty is due to the continued testing of our reeds in
both independent labs as well as in the field. Our reeds have been rated to over 400 million operations
without sticking and have been used in Electronics, Military and Automotive since 1979. Please call us for a
detailed brochure on either our reed switches or test

reports. UL BP-4702.

*Outside of U.S.A. warranty is $20-1. UL, CUL, CE

"We Contact The World"

®

906 JERICHO TURNPIKE, NEW HYDE PARK, NY 11040

Tel: [phone] • 516-328-3351 • Fax: [phone]

www.tanealarm.com • E-MAIL: [e-mail]

Tane Catalog 2006.qxd 8/3/06 8:53 AM Page 32