TANDBERG Viking FS-1600, FS-1610 Hardware User Manual
TANDBERG
VIKING FS-1600
NAS APPLIANC
E
Hardware User Manual
20 Bendemeer Road, #04-05
Cyberhub, Singapore 339914
Phone + 65 6396 0786
Telefax + 65 6396 0787
© Tandberg Data Asia
Part
No.
January 2008
TANDBERG DATA ASIA
65
82 B7 - 01
Related publications available from Tandberg Data Asia:
Part No. Title
6582X2 Tandberg Viking Series Storage Server
Administration Manual
This publication may describe designs for which patents are granted or pending.
By publishing this information, Tandberg Data Asia conveys no license
und
er any patent or any other rights.
Every
effort has been made to avoid errors in text and diagrams. However,
Tandberg
Data Asia assumes no responsibility for any errors which may ap-
pear
in this publication.
It
is the policy of Tandberg Data Asia to improve products as new techniques
and
components become available. Tandberg Data Asia therefore reserves
the
right to change specifications at any time.
We
would appreciate any comments on this publication.
_____________________________________________________________
i
Table of Contents
Table of Contents i
1. Overview 1-1
1.1. Package Contents 1-1
1.2. Features of Viking FS-1600 Series NAS Appliance 1-2
1.3. Front Panel 1-4
1.4. Front P anel LED Indicators 1-5
1.5. Rear Panel 1-6
1.6. Rear Panel LED Indicators (LAN) 1-7
1.7. Storage 1-7
1.7.1. DVD-ROM Drive 1-7
1.7.2. Hard Disk Drives 1-8
2. Setting Up 2-1
2.1. Requirements 2-1
2.1.1. Ambient Temperature 2-1
2.1.2. Height and Weight 2-1
2.1.3. Rack Mounting 2-2
2.1.4. Power Source 2-2
2.1.5. Circuit Overloading 2-2
2.1.6. Reliable Grounding 2-2
2.1.7. Electrical Shock 2-2
2.1.8. Battery Precaution 2-2
2.1.9. Sufficient Ventilation 2-3
2.2. Accessing the HDD Tray & Installing Hard Drives 2-3
2.3 Rack Installation: Content of Accessory Kit 2-5
2.4. Rack Mount Installation 2-6
2.4. Connecting Cables 2-9
2.5. Turning ON the Viking FS-1600 Series NAS Appliance 2-10
2.6. Troubleshooting 2-10
2.7. Turning OFF the Viking FS-1600 Series NAS Appliance 2-12
2.7.1. Using Microsoft
®
Windows
®
2-12
3. RAID Configuration 3-1
3.1. Hardware RAID Layout 3-1
3.1.1. System Volume (SV) 3-3
3.1.2. Data Volume (DV) 3-3
3.2. RAID Volume Calculation 3-3
4. Customizing the Viking FS-1600 Series NAS Appliance 4-1
4.1. Preventing Static Electricity Discharge 4-1
4.2. Expanding Connectivity 4-1
4.2.1. Built-in Networking 4-2
4.2.2. USB Connection 4-2
4.3. Upgrading Storage Capacity 4-2
4.2.2. Removing/Installing Hot-Swap Hard Drive 4-2
5. System Management 5-1
5.1. Windows Installer 5-1
5.2. RAID Management 5-3
5.2.1. Configure and Creation of RAID Volumes 5-3
5.2.2. Changing RAID Level and Capacity Size 5-4
Tandberg Data Table of Content
_____________________________________________________________
ii
5.3.
System Recovery 5-4
6. Troubleshooting 6-1
6.1. Before Calling Tandberg Data Technical Support 6-1
6.2. Safety Guidelines 6-2
6.3. Troubleshooting Steps 6-2
7. Glossary 7-i
_____________________________________________________________
1-1 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1. Overview
1.1. Package Contents
The Tandberg Viking FS-1600 Series NAS Appliance comes with the
following items:
• Viking FS-1600 Series NAS Appliance (1)
• AC power cord (1)
• Rackmount kit (1 set)
• OS Recovery DVDROM / Documentation CDROM (2 discs)
Notes
If any of the items above are damaged of missing, contact your dealer immediately.
Save the packaging box and materials for future transportation use.
Tandberg Data Overview
_____________________________________________________________
1-2 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.2. Features of Viking FS-1600 Series NAS
Appliance
The Viking FS-1600 Series Network Attached Storage appliance is a
powerful rack-mountable system that offers a new standard for flexible
management and monitoring networked attached storage by the network
administrators. The hardware features include the followings:
• Processor:
o Viking FS-1600 uses dual 771-pin LGA Sockets that
supports 2 x 64-bit Dual-Core Intel
®
Xeon® 1.60 GHz
processor with 1066 MHz FSB and 4MB L2 Cache (5110)
o For Viking FS-1610 uses dual 771-pin LGA Sockets that
supports 1 x 64-bit Quad-Core Intel
®
Xeon® 2.00 GHz
processor with 1333 MHz FSB and 12MB L2 Cache (E5405)
• Intel 5000V (Blackford VS) chipset
• 2 x Intel® (ESB2/Gilgal) 82563EB Gigabit Ethernet Controller which
supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
with Intel® I/OAT for fast, scaleable, and reliable networking
• Memory:
o 6 x 240-pin DIMM socket that accept a maximum memory
capacity of 16GB 667 / 533 MHz DDR2 ECC FB SDRAM
modules (Memory modules must be populated in pairs)
o Default RAM configuration for FS-1600 is 1GB and FS-1610
is 2GB
• Expansion slots:
o 1 x (x8) PCI-e slot
o 1 x (x4) PCI-e slot (using x8 slot)
o 2 x 64-bit / 100 MHz PCI-X (3.3V) slot
o 1 x 32-bit / 33 MHz PCI (3.3V) slot
• RAID:
o FS-1600 uses Areca ARC-1160 Serial-ATA II RAID
controller with 256MB RAID cache which supports RAID
level 0, 1, 0+1, 3, 5 and 6 (consume one PCI-X slot)
o FS-1610 uses Areca ARC-1261ML Serial-ATA RAID
controller with 256MB RAID cache which supports RAID
level 0, 1, 0+1, 3, 5 and 6 (consume one x8 PCI-e slot)
• Storage support for:
o Up to 16 x hot-swap Serial-ATA II hard-drive bays
o Up to 16 x hard-drive with RAID configuration
• Front control panel
o Power button
o Reset button
o 1 x Fast UART 16550 serial port
o 2 x USB 2.0 port
Tandberg Data Overview
_____________________________________________________________
1-3 Tandberg Viking FS-1600 Series NAS Hardware User Manual
• Rear panel connectors
o 1 x PS/2 keyboard port
o 1 x PS/2 mouse port
o 1 x Fast UART 16550 serial port
o 1 x HD-68 Ultra320 SCSI port
o 1 x VGA port
o 1 x ECP/EEP parallel port
o 2 x RJ45 LAN port
o 2 x USB 2.0 port
• 2 x Redundant Power Supply Unit (Total 800W)
The Tandberg Viking FS-1600 Series NAS appliance is fully compatible with
Microsoft Windows Storage Server 2003.
Tandberg Data Overview
_____________________________________________________________
1-4 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.3. Front Panel
1234567
1. Power button
Button that turns the FS-1600 Series on or off.
2. Reset button
Button that reset the FS-1600 Series.
3. Power LED
Lights up green when power is on.
4. HDD Activity LED
Indicates HDD activity by flashing LED.
5. LAN Access LED indicator
Indicates LAN status and activity of LAN1 and LAN2 Ethernet
controllers.
6. Over temperature LED indicator
Indicates if FS-1600 Series is overheated (continuously on) or fan
failure (flashing).
Tandberg Data Overview
_____________________________________________________________
1-5 Tandberg Viking FS-1600 Series NAS Hardware User Manual
7. Power Supply Unit Failure LED
Indicates if one or more power supply units have failed.
1.4. Front Panel LED Indicators
LED Colour State Meaning
Power Green On FS-1600 Series NAS is on.
Off FS-1600 Series NAS is off.
HDD Green Off No hard-drive activity or no hard-drive is
connected or.
Blink Hard-drive activity.
HDD (Fault) Amber On Hard-drive is faulty.
Off Hard-drive is in normal state.
LAN Green On Network link is established.
Blink Network link is established and LAN
activity.
Off No link is established and cable could be
faulty.
Over Temp Red On FS-1600 Series is overheated.
Off FS-1600 Series is in normal condition.
Blink One or more the system fans failure.
Power Fault Red On One or more PSU have failed.
Off All PSU is in normal conditions.
Tandberg Data Overview
_____________________________________________________________
1-6 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.5. Rear Panel
1
2
34 5 6 7 8 9 10
1. Fan
Cools the FS-1600 Series. Blocking the ventilation may result in
overheating.
2. Power supply connector
Plug the power cord to into this connector.
3. HD-68 pin Ultra320 SCSI connector
Connector for external SCSI device.
4. PS/2 mouse connector
Connector for PS/2 mouse device.
5. PS/2 keyboard connector
Connector for PS/2 keyboard device.
6. USB connectors
Connectors for USB devices.
7. RS232 serial connector
Connector for UPS for other serial port device.
8. Parallel connector
Connector for printing device.
9. VGA console connector
Connector for a console monitor.
10. LAN connectors (LAN1 & LAN2)
RJ45 connectors for 10/100/1000 Base-T/X networks.
Tandberg Data Overview
_____________________________________________________________
1-7 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.6. Rear Panel LED Indicators (LAN)
LED Green Orange Meaning
LINK-ACT On - Network link is established.
Blinking - Activity in network link.
Off - No link or cable faulty.
Speed On Off Network links is established and
operating at maximum speed.
Off On Network links is established and
operating at 100 Mbps speed.
Off Off Network links is established and
operating at 10 Mbps speed.
1.7. Storage
The Viking FS-1600 Series NAS appliance is equipped with the following
storage devices connectivity:
• DVD-ROM drive
• High-capacity Serial-ATA I or II hard disk drive
1.7.1. DVD-ROM Drive
The DVD-ROM drive allows installation of additional software and recovery
of the OS image to the factory default level using the accompanied OS
Recovery Disc.
Notes
Keep the Recovery Discs in a safe place when not in use to avoid scratches or
other damage. Any kind of dirt or damages can affect the data on the disc or stop
the drive from reading properly.
In case of emergency or in the event when there is no power to the FS-1600 Series
NAS appliance, a stuck disc can be retrieve by inserting a straightened paper clip in
to the eject slot.
Tandberg Data Overview
_____________________________________________________________
1-8 Tandberg Viking FS-1600 Series NAS Hardware User Manual
1.7.2. Hard Disk Drives
The Viking FS-1600 Series NAS came supports four hot-swap Serial-ATA I
or II hard drives with the capability of configuring into various RAID
(Redundant Array of Independent Disk) settings.
Depending on your model of the FS-1600 Series NAS, they come with either
Areca ARC-1160 (FS-1600) or ARC-1261ML (FS-1610) Serial-ATA II RAID
controller to support the Serial-ATA hard drives.
When configured correctly, the FS-1600 Series NAS appliance can provide
non-stop service with a high degree of fault tolerance through the use of
RAID technology and advance array management feature. The hard drives
can be configured to RAID level 0, 1, 0+1, 3, 5 or 6.
_____________________________________________________________
2-1 Tandberg Viking FS-1600 Series NAS Hardware User Manual
2. Setting Up
2.1. Requirements
When planning a site to house the Viking FS-1600 Series NAS appliance,
you may want to consider requirements for power and network availability,
as well as a space with well regulated temperature and humidity that is
relatively free of dust and other airborne contaminants. If your installation
calls for placement on a table top, apply the supplied rubber feet to the
bottom of the chassis.
Before unpacking and installing the FS-1600 Series NAS appliance, select a
suitable installation site for maximum efficiency. Consider the following
factors when choosing a site:
• Near a grounded power outlet
• Clean and dust-free
• Sturdy surface free from vibration
• Well-ventilated and away from sources of heat
• Protected from electromagnetic fields produced by electrical devices
such as air conditioners and radio and TV transmitters.
Take note of the following information when planning where and how to
install the FS-1600 Series NAS appliance.
Warnings
Do not attempt to modify or use the supplied AC power cord if it is not the
exact type required. A product with more than one power supply will have a
separate AC power cord for each supply.
The power button on the NAS does not turn off AC power. To remove the AC
power from the NAS, you must unplug the AC power cord from the wall outlet
or power supply. The power cord is considered the disconnect device to the
main (AC) power. The socket outlet that the NAS plugs into should be
installed near the equipment and should be easily accessible.
2.1.1. Ambient Temperature
The maximum operating temperature of the FS-1600 Series NAS appliance
is 95°F (35°C) and the relative humidity of the NAS is in the range 8% to
90% (non-condensing). Careful consideration should be given to installing
the NAS in an environment compatible with 95°F (35°C) maximum ambient
temperature.
2.1.2. Height and Weight
Before installing the FS-1600 Series NAS appliance, make sure that the
surface on which you are setting it is strong enough to bear its weight and
accommodate its size.
• Dimensions (including front bezel): 17.2 (W) × 5.2 (H) × 25.5 (D)
inches or (437 × 132 × 648 mm)
• Weight (approximately, depending on configuration): 72 lbs. (32.7
kg)
Tandberg Data Setting Up
_____________________________________________________________
2-2 Tandberg Viking FS-1600 Series NAS Hardware User Manual
.
2.1.3. Rack Mounting
When mounting your FS-1600 Series NAS appliance into a cabinet
(equipment rack), make sure you maintain correct mechanical load leveling
to avoid hazardous conditions.
2.1.4. Power Source
The FS-1600 Series NAS appliance should be operated using only the type
of power source indicated on the product label.
• Voltage: 100-240 V
• Current: 4-10 A
• Frequency: 50/60 Hz
2.1.5. Circuit Overloading
Appropriate consideration should be given when connecting the supply
circuit to the FS-1600 Series NAS appliance to avoid any circuit overload.
The system nameplate rating should be used when addressing concerns
about circuit overload.
Warning
Make sure that the site has the necessary capacity to handle the FS-1600
Series NAS appliance. Overloading electrical supply circuits is extremely
hazardous.
2.1.6. Reliable Grounding
To avoid the potential for an electrical shock hazard, the rack assembly itself
must be suitably grounded, according to your local regional electrical codes.
This typically will require the rack to have its own separate ground. We
recommend you consult your local approved electrician.
2.1.7. Electrical Shock
Do not operate the FS-1600 Series NAS appliance without the top cover in
place. Opening or removing the cover may expose you to dangerous voltage
and can cause electrical shock.
2.1.8. Battery Precaution
There may be a danger of explosion if the CMOS battery is incorrectly
replaced. Replace this battery with model CR2032 only. Use of another
battery may present a risk of fire or explosion. Dispose of used batteries
according to manufacturer's instructions.
Tandberg Data Setting Up
_____________________________________________________________
2-3 Tandberg Viking FS-1600 Series NAS Hardware User Manual
2.1.9. Sufficient Ventilation
The vents on the front panel and the fan openings on the rear panel provide
ventilation for the FS-1600 Series NAS appliance. Make sure that these
openings are not blocked and that adequate ventilation is provided where
the unit is installed.
2.2. Accessing the HDD Tray & Installing Hard
Drives
To install HDD to the FS-1600 Series NAS appliance, remove the drive tray
from the chassis in order to mount any Serial-ATA I or II HDD.
1. Press the release tab to release the drive tray from its locking
position.
2. Pull the drive tray out from the chassis by:
a. Pressing the tray handle release button.
b. Grab the tray handle and pull out the drive tray from the
chassis.
3. Remove the 2 screws at each side of the dummy tray and take out
the dummy tray as shown below:
Drive Tray
Dummy Drive
Release Button
Tandberg Data Setting Up
_____________________________________________________________
2-4 Tandberg Viking FS-1600 Series NAS Hardware User Manual
4. Slide the hard disk drive (HDD) into the tray and secure it with 3
screws on each side of the tray as shown below:
Hard Drive
Tray
Hard Drive
Use a Hard, Stable
Surface when installing
the Hard Drive
5. Once the HDD is securely fastened to the tray, slide it back to the
FS-1600 Series chassis.
Loading...