Tanaka TPH-270PFPN User Manual

IllustrIllustr

Illustr

IllustrIllustr

aa

ted Pted P

a

ted P

aa

ted Pted P

arar

ar

arar

ts Mants Man

ts Man

ts Mants Man

ualual

ual

ualual

Model Number:

TPH-270PF/PN

ARTICULATING POLE HEDGE TRIMMER

P/N 29733
Rev 001
Date 11-13-07

Supplier T o The Outdoor Power Equipment Industry

Nikko Tanaka Enginering • 1028 4th Street SW Bldg B • Auburn, WA 98001 • Phone: [phone] • Fax: [phone]

[e-mail]

PRODUCT INFORMATION

PRODUCT INFORMATION

TPH-270PF* / PN

Low Emission Pole Hedge Trimmer

30% More Fuel Efficient

*

C.A.R.B. Tier II

CERTIFIED

NOTE - The TPH-270PN IS NOT

C.A.R.B. Tier II certified.

PF = PureFire Engine & Catalytic Muffler
PN = PureFire Engine & NO Catalytic Muffler

Features / Benefits

26cc, 1.4 hp low emission two-stroke engine reduces emissions by up to 70 percent
and features Tanaka’s proven high quality engine components.

Increased fuel efficiency saves you money and increases productivity.
Articulating / Pivoting Blades allow you to select any cutting angle from -85 to + 45

degrees (130 degrees total).
22 inch, double sided, dual reciprocating blades provide excellent cutting speed

and powerful cutting action.

1 / 2 / 5 Warranty Coverage provides One-Year coverage for professionals, Two-
Year Coverage for Homeowners, and Five Years on the Electronic Ignition Module.

Specifications

Engine Type PureFire™ Low Emission
Engine Displacement cc (cu. in.) 26 (1.6)
Power (h.p.) 1.4
Carburetion Walbro Diaphragm with Prim er
Ignition System T ransistorized Electr oni c
Fuel Tank Capacity / fl. oz. (cc) 22.1 (650)
Anti-Vibration System Front & Rear Handle
Clutch System Heavy-Duty Centrifugal
Shaft Support 5 Shaft Bearings
Drive System 7mm So lid S te el Shaft
Shaft Length / inches (mm) 57 (1450)
Cutting Blade Type Double Sided, Dual Reciprocating
Blade Length / in ches (mm) 22 (560)
Articulating Angle Degree 130 (-85 to +45)
Dry We ight / lbs. (kg ) 13.0 (5.9)

ISM, Inc. • 1028 4th St. Sw, Suite B • Auburn, WA 98001 • Phone: [phone] • Fax: [phone] • E-mail: custsvc@tanaka -ism.com

Optional Accessories:

ORDER # DESCRIPTION

Varies Perfect Mix™ 2-Cycle Engine Oil

All data and specifications are subject to change without notice

For more information, contact:

PARTS INFORMA TION

ENGINE / CYLINDER, PISTON, CRANKCASE, IGNITION • FIGURE 1

TPH-270PF/PN

www.tanaka-usa.com

Page 1

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

ENGINE / CYLINDER, PISTON, CRANKCASE, IGNITION • FIGURE 1

IT EM PART NUM BER DESCRI P TI ON QTY COMM ENTS

1-1 1570168090 CAP ,SPARK PLUG ASS’Y 1
1-2 0181161021 PLUG,SPARK 1
1-3 255016 802 0 COV E R,S PARK P LUG , RUBB E R 1
1-6 0010168090 SE T,CYLINDER 1 Incl udes c yli n der gask et
1-7 99461050184 BOLT,HEX,5X18,S 4
1-9 0170168020 GASKET,CYLINDER 1
1-11 04101601200 RING,P ISTON 2
1-12 0300168090 SE T,PISTON 1 Inc l ud es rings & circli ps
1-13 03900000201 CIRCLIP,P IS TON PIN 2
1-14 03701700200 PIN,PISTON 1
1-16 0460168080 CRANKSHAFT 1
1-17 99962091325 BEARING,NEEDLE,F-910 1
1-18 06810100200 KEY,WOODRUFF,3X 13X4.5 1
1-19 33000200210 SHIM,12. 2X19X.10 V Shi m s are " as needed" to obtain
1-19 33000200220 SHIM, 1 2.2X19X.15 V c o rrect s i d e c learanc e
1-19 33000200230 SHIM,12. 2X19X.20 V
1-19 33000200240 SHIM,12. 2X19X.30 V
1-21 99101080011 NUT,8 1
1-22 79801630200 PULLEY,STARTER 1
1-26 35910112203 W A SHER, CLUTCH B 1
1-31 0720168090 CRANKCA SE ,AS SY 1 Crankc a se as sy i nclude s bearings, seals
1-32 99966122240 SE AL, OIL, # 12227 1 an d gask et .
1-33 99961600100 BEARING,BALL,#6001 2
1-34 0900168020 GASKET,CRANKCASE 1
1-36 99414050251 SCREW,5X 25 2
1-37 99011050381 SCREW,5X 38 2
1-38 99210050012 WASHER,S,5 2
1-40 1910168090 W IRE,LE A D A SS’Y 1
1-46 99416040186 SCREW,WS,4X 18 2
1-47 1820186A201 WASHER,SPECIAL 2
1-50 1672174390 COIL,IGNITION ASS ’Y 1
1-51 1552174380 ROTOR,MAGNETO 1
1-52 99200080011 WASHER,8 1
1-54 99101080011 NUT,8 1
1-55 2500168020 TUBE,INSULATOR 1

www.tanaka-usa.com

Page 2

[e-mail]

PARTS INFORMA TION

FUEL TANK, FUEL SYSTEM, AIR CLEANER, MUFFLER • FIGURE 2

P/N 762-00940-901

TPH-270PF/PN

43

P/N 455-01680-91

www.tanaka-usa.com

Page 3

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

FUEL TANK, FUEL SYSTEM, AIR CLEANER, MUFFLER • FIGURE 2

ITEM PART NUMBER DESCRIPTION QTY COMMENTS

2-1 7380168120 PROTECTOR,MUFFLER 1
2-3 7370168020 GASKET,MUFFLER 1
2-4 99415040182 SCREW,PS,4X18 2
2-5 99053060653 SCREW,HEX,6X65 2
2-6 99201060011 WASHER,6 2
2-7 7040168090 SET,MUFFLER 1
2-10 7210440020 PIPE,TAIL 1
2-11 99434040081 SCREW,4X8/S 1
2-13 7320440020 ARRESTER,SPARK 1
2-15 7360168022 COVER,MUFFLER B 1
2-16 1330168020 SHIELD,HEAT 1
2-17 7350168080 COVER,MUFFLER A 1
2-20 99415050101 SCREW 2
2-24 99415040142 SCREW,4X14/PS 2
2-30 2570168120 COVER,SPARK PLUG 1
2-31 35902103200 WASHER,CLUTCH,B 2
2-32 29001620800 SHOE,CLUTCH 2
2-33 3420630B200 SPRING,CLUTCH 1
2-34 3480602R200 WASHER,CLUTCH A 2
2-35 3570075T200 BOLT,STEP 2
2-36 99416050162 SCREW,5X16/WS 4
2-38 99205080030 WASHER,8 2
2-39 99072045164 SCREW,TAPPING,4.5X16 1
2-40 1330168720 SHIELD,HEAT 1
2-41 4030097A21 GASKET,INLET MANIFOLD 1
2-42 4040097A90 SET, CARB INSULATOR 1
2-43 99416050241 SCREW 5x24WS 2
2-44 7370165A201 GASKET,MUFFLER 1
2-45 7040168790 SET,MUFFLER 1
2-46 4020602K21 GASKET,CARBURETOR 1
2-50 4550168091 SET,CARBURETOR 1 Includes carburetor gasket
2-53 4360162V20 BASE,CLEANER 1
2-54 5280168020 VALVE,CHOKE 1
2-55 99967008012 O-RING,S-8 1
2-56 4700602N200 COLLAR,CLEANER 1
2-57 4230637C800 BODY,CLEANER 1
2-58 99200050011 WASHER,SMALL,5 2
2-59 99210050012 WASHER,S,5 2
2-60 99011050602 SCREW,5X60 2
2-61 4460637C200 ELEMENT,CLEANER 1
2-62 4520168090 SET,CLEANER COVER 1 Includes bolt
2-63 3800637C200 BOLT,CLEANER COVER 1
2-68 6590430020 COLLAR,C 3
2-70 44225143800 PUMP,PRIMING ASS'Y 1

www.tanaka-usat.com

Page 4

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

FUEL TANK, FUEL SYSTEM, AIR CLEANER, MUFFLER • FIGURE 2

IT EM PART NUM BER DESCRI P TI ON QTY COMM ENTS

2-71 5950168090 CAP ,TANK A SS’Y1
2-75 6490168020 COLLAR,TANK F IXING 1
2-76 99463050204 BOLT, HEX 5X20 2
2-77 9400430020 STAND,ENGINE 1
2-78 70002504080 PIPE,FUEL,2.5X4X 80 2
2-79 53432710200 GROMM ET,FUE L PIPE 1
2-80 99201050061 WASHER,5 1
2-81 99461050304 BOLT,HEX,5X30S 1
2-86 2230162V900 PIPE,FUEL,ASS’Y1
2-87 68000731201 CLIP 6.3 1
2-89 6750404280 FILTER,FUEL 1
2-91 5910168520 TANK 1
2-121 5640661190 VENT,AIR AS S’Y1
2-122 5650503220 PIPE , AIR VE NT 1 Before S /N V0967 69
2-122 5650441020 PIPE , AIR VE NT 1 S/N V09677 0 and aft er
2-123 6460661290 VALVE 1
2-124 68000731201 CLIP 6.3 1 Before S/N V096769
2-125 56 10007020 COV E R,AIR V E NT 1 Before S /N V0967 69

www.tanaka-usa.com

Page 5

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

RECOIL STARTER • FIGURE 3

ITEM PART NUMB ER DESCRIPTI O N QTY COMM ENT S

3-0 7620094090 STA RTER, RECOIL A S S ’Y 1
3-2 78500940200 HANDLE,STARTER 2
3-3 77200940801 BODY,STARTER 1
3-4 78000940200 SPRING,RECOIL 1
3-5 78300940200 ROPE,STARTER 1
3-6 77400940200 REE L,STARTER ROPE 1 Prior t o S/ N V 218191
3-6 7740163021 REEL, STARTER ROPE 1 S/ N V 218191 and after
3-7 7880163021 PAWL,STARTER 1
3-8 80105015200 W ASHE R,STARTER PULLEY 1
3-10 8370501521 PLATE,FRIC TION 1
3-11 82205015200 SHIM, STARTER PULLEY 1 Prior t o S/N V218191
3-11 8220423020 SHIM,STARTER PULLEY 1 S/N V218191 and after
3-12 8390423020 BOLT,SET 1

www.tanaka-usa.com

Page 6

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

CARBURETOR • FIGURE 4

ITEM PART NUMBER DESCRIPTION QTY COMMENTS

4-0 4550168091 SET,CARBURETOR 1
4-1 51425100200 SCREW,THROTTLE SET 2
4-4 54425164200 STAY,ADJUST,CABLE 1
4-5 53925120200 SWIVEL 1 * Contained in Carb Repair Kit
4-7 48925100200 RING,S TOP 1 P/N 650-25124- 9 00 ( not available i n dividually)
4-10 55025100200 O-RING 1
4-11 5992001W38 JET,MAI N LONG #38 1
4-12 57725100200 GASKET,PUMP 1
4-13 57625100200 DIAPHRAGM,PUMP 1
4-16 57825007200 SCREEN,INLET 1
4-17 5752514780 BODY,PUMP ASS’Y1
4-18 4752503820 GASKET,DIAPHRAGM 1
4-19 47425001800 DIAPHRAGM,METERING 1
4-20 47625004200 COVER,DIAPHRAGM 1
4-21 54825101200 SCREW,SET 4
4-22 61425137200 ADJUSTER,CABLE 1
4-23 99101060013 NUT,6 1
4-24 4310634C200 GASKET,CLEANER 1
4-41 5492516520 WASHER,THRUST 1

www.tanaka-usa.com

Page 7

[e-mail]

PARTS INFORMA TION

FAN CASE, CLUTCH DRUM • FIGURE 5

TPH-270PF/PN

ITEM PART NUMBER DESCRIPTION QTY COMMENTS

5-1 2890098080 DRUM,CLUTCH 1
5-3 99 35 001 20 02 RING, STOP, C- 12 EX 1
5-5 5990098021 CUSHION,RUBBER 1
5-6 99051050163 BOLT,HEX,5X16 1

5-8 99461050254 BOLT,HEX HOLE,5X25S 1
5-11 11 20 168 08 0 CASE,FAN 1 Includes bearings
5-15 3600099020 HOLDER,PIPE 1
5-20 20 31 166 02 00 GROMM E T ,PRIMAR Y C O R D 1
5-26 99201050061 WASHER,5 1
5-27 32 43 735 02 0 WA S H ER ,GEAR CASE 1
5-28 3610099020 FITTING,METAL 1

www.tanaka-usa.com

Page 8

[e-mail]

PARTS INFORMA TION

THROTTLE LEVER, HANDLE, DRIVE SHAFT • FIGURE 6

TPH-270PF/PN

www.tanaka-usa.com

Page 9

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

THROTTLE LEVER, HANDLE, DRIVE SHAFT • FIGURE 6

IT EM PART NUM BER DESCRI P TI ON QTY COMM ENTS

6-1 34337300200 SHAFT,DRIVE 1
6-2 3413760181 PIPE,DRIVE SHAFT 1
6-3 34737601900 BUSHING,ASS’Y6
6-4 99101060041 NUT,6 2
6-5 5003728620 HANDLE 1
6-6 50637300200 BRACKET,HANDLE,A 1
6-7 5033738E20 GRIP,HANDLE 1
6-8 99023060351 BOLT,6 X35 P LUS 2
6-10 99311052012 SCRE W,TAPPING 5X20 1
6-11 36832350200 W A SHER, BRAKE SHAF T 1
6-25 8703840090 LEVER,THROTTLE ASSY 1
6-83 8853840080 W IRE,THROTTLE W/ S WITCH 1
6-98 2533840020 LEVER,SAFETY 1
6-100 8323840020 SPRING,RETURN 1
6-103 8813840080 STOPPER,THROTTLE 1
6-110 99431050203 SCREW 5X20 2
6-111 99101050043 NUT,5 2
6-112 99 34604020 S CRE W, 4X20 4
6-125 8803840020 LEVER,THROTTLE 1

www.tanaka-usa.com

Page 10

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

GEAR CASE • FIGURE 7

www.tanaka-usa.com

Page 11

[e-mail]

PARTS INFORMATION

TPH-270PF/PN

GEAR CASE • FIGURE 7

ITEM P ART NUMBER DESCRIPTI ON QTY COMMENTS

7-1 3003228020 CASE,GEAR,A 24mm 1
7-2 99961690100 BEARING,BALL,#6901 1
7-3 99961690101 BEARING,BALL,#6901ZZ 1
7-4 99352012002 RING,STOP,S12,OUTER 1
7-5 99351024002 RING,STOP,C-24,IN 1
7-6 99961608002 BEARING,BALL,#608Z 1
7-7 99351022002 RING,STOP,C22,IN 1
7-8 99431060081 SCREW,6X8 3
7-9 99967041000 O-RING,P-41 1
7-10 99413060101 SCREW,PLUS,6x10P 1 S/N U288322 and after
7-11 99051050103 BOLT,HEX.HOLE,5X10 1
7-12 99461050224 COVER,GEAR CASE "B" 1
7-13 99053060125 SCREW,HEX HOLE 6X12 2
7-14 87132600200 WASHER,SPECIAL,B 2
7-15 3013228022 GEAR CASE B 1 Before S/N U288321
7-15 3013228023 CASE,GEAR,B 1 S/N U288322 and after
7-16 99961600000 BEARING,BALL,#6000 1
7-17 99351026002 RING,STOP,IN,C-26 1
7-19 99355060000 RING,STOP,E6 1
7-20 3273228020 COVER,GEAR CASE A 1
7-22 99011040081 SCREW,4X8 2
7-23 99961608002 BEARING,BALL,#608Z 1
7-24 99351022002 RING,STOP,C22,IN 1
7-25 0493228080 HANDLE 1
7-26 0333228081 GUIDE,SLIDE 1 See Bulletin #PI 3111
7-27 87132600200 WASHER,SPECIAL,B 1
7-28 99210060062 WASHER,S ,6 1
7-29 99053060153 BOLT,HEX,6X15 2
7-30 99210060062 WASHER,S ,6 2
7-35 3023228091 SET, GEAR & PINION 1 See Bulletin #PI 3097
7-44 0863228620 SEAL,GREASE,B 1 S/N U288322 and after

www.tanaka-usa.com

Page 12

[e-mail]

PARTS INFORMA TION

CUTTING BLADES, TOOLS • FIGURE 8

TPH-270PF/PN

www.tanakapowerequipment.com

Page 13

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

CUTTING BLADES, TOOLS • FIGURE 8

ITEM PART NUMBER DESCRIPTION QTY COMMENTS

8-1 1003228021 SHAFT,CAM 1
8-2 1013316022 ROD,CAM 2
8-3 0753228020 PLATE,GUIDE 2
8-4 1223316021 GUIDE,CUTTER 625MM 1 ~A290200
8-4 1223228621 GUIDE,CUTTER 1 A290201~
8-5 CB-21A BLADE,CUTTER,THT-210/2100 2 ~U288058
8-5 1203228721 CUTTER,A 2 U288059~
8-6 1243320221 BOLT,CUTTER FIXING,A 4 ~A290200
8-6 1243228720 BOLT,FIXING,A 4 A290201~
8-7 12933202201 WASHER,7 4
8-8 1233317A20 NUT,CUTTER FIXING 4 ~A290200
8-8 40927 NUT,FLANGE,M6 4 A290201~
8-9 99052060165 BOLT,HEX,6X16 2
8-10 08533160200 SEAL,GREASE A 1
8-11 1053228020 HOLDING,PLATE 1
8-12 3283328021 COVER,GEAR CASE "B" 1
8-13 99961608004 BEARING,BALL,608DD 1
8-14 99461040104 BOLT,HEX,4X10,S 2
8-15 99461040124 BOLT,HEX 4X12 6
8-16 13833160200 COVER,CUTTER,22" 1
8-61 1253228720 BOLT,CUTTER FIXING,B 3 A290201~

I T EM P A RT N UMBER DES C RIP T IO N QTY CO MMENTS

0-1 81320000200 WRENCH,HEX,4 1
0-2 03629331501 SPANNER,COMBI 1

www.tanakapowerequipment.com

Page 14

[e-mail]

PARTS INFORMA TION

TPH-270PF/PN

DECALS • FIGURE 9

IT EM PART NUM BER DESCRI P TI ON QTY COMM ENTS

9-1 9060168020 PLATE,NAME,PUREFIRE 1
9-2 9064229020 PLATE,NAME,TPH-270PF 1
9-4 92337400200 DECAL,LEVEL 2
9-5 95137503200 DECA L,P RO-F O RCE B 1
9-7 9293810020 DECAL,SYMBOL,PF 1
9-9 9073230420 DECAL 1
9-21 9210168120 DECAL,CAUT ION 1
9-25 9193229020 DECAL,A 1
9-26 9233738F20 DECAL,LEVEL 1
9-40 9064229320 DECAL,TPH-270PN 1

www.tanaka-usa.com

Page 15

[e-mail]

BULLETIN NUMBER PI 3111

TECHNICAL SERVICETECHNICAL SERVICE

Date: September 2000

Model & Serial:
All units produced after serial number V096770.

Reason:

The slide guide on these models has been widened to add strength.

Part Number Changes:

Old Part # New Part # Description Remarks

033-32280-80 033-32280-81 Slide Guide

TPH-200, TPH-270PF, and TPH-270PN

is marketed exclusively by:

ISM, Inc. • 1028 – 4

th

Street, Suite B • Auburn, WA 98001 • Phone: [phone] • Fax: [phone]

www.tanaka-usa.com * [e-mail]

TECHNICAL SERVICE BULLETIN NUMBER PI 3119

Date: January, 2002

Model & Serial: All THT, HTD, HTS, TPH hedgetrimmer models.

All units after serial number Y004401

Reason: All future production of hedgetrimmer models will utilize a blade-retaining nut that

is of the locking variety. These nuts are oblong on one side to prevent loosening
during use, but can be removed and re-installed without losing their locking
ability.

When adjusting blade-fastening hardware, thread the bolt (18) through the

blades and guide bar from the bottom, to a point where the flat washer (17), is still
able to rotate, (usually to seat, and then backed off between ¼ and ½ revolution).
Then install the lock nuts on the topside, tightening them while holding the bolt in
place. Tighten all nuts, and then re-check for adjustment prior to operation. A
lubricating agent, such as WD-40 should also be used to prevent sap build-up
and premature wear.

Part Number Changes:

Old Part # New Part # Description Remarks

123-33202-200 123-3317A-20 Lock Nut Reference #19

is marketed exclusively by:

ISM, Inc. • 1028 – 4

th

Street, Suite B • Auburn, WA 98001 • Phone: [phone] • Fax: [phone]

www.tanaka-usa.com * [e-mail]