Tanaka AST-7000S User Manual
Specifications and Main Features
- Model: AST
- 7000
- It is compatible with Tanaka models AST
- 7000, 7000S, 210, TBC
- 4500, 4501, 2211, TBC
- 220, 240, TBC
- 250, 2501, 2510, 265, TBC
- 270PF / PN, TBC
- 300, 3010, TBC
- 420PF
- Pruning saw attachment, TPS
- 200 ,
- Shaft 24″ 98″ reach to 10″ Oregon® bar & chain
- Easy mount coupler
- Pruning saw extension TPS
- EXT # (748511)
- Long reach pruning saw extension, 2 feet reach
- TPH
- 200 Hedge Trimmer Attachment 22″
- Double Side Trimming Blades, Double Sided Articulating Cutting Angle/Pivoting Cut
- Max 130 degree
- Mini
- Cultivator
- TMC
- 200 4 digging depth maximum
- 6 breadth, 49:1 reduction ratio
- Nylon Line: These include But ,095 or .105 other spool sizes including 50 ft , 1 lb , 3 lb , and 5 lb
- The following options are available for shoulder straps PSS 175 SS 250 SS 400
- Semi Auto Head and Manual Head.
- Piston pin remover, gear shaft remover, and other special tools and maintenance accessories are available.
Frequently Asked Questions
- Q: The AST-7000 unit can be used with what models?
A: Since the Tanaka saw is AST-7000, 7000S, 210, TBC-4500, 4501, 2211, TBC-220, 240, TBC-250, 2501, 2510, 265, TBC-270PF/PN, TBC-300, 3010, TBC-420PF models, AST-7000 is compatible model also sea. Multiple Models.
- Q: What is the length of the TPS-200 Pruning Saw attachment reach?
A: The TPS-200 Pruning Saw attachment features a 24" shaft that provides a reach of 98".
- Q: What is the deepest level the TMC-200 Mini-Cultivator can dig?
A: The TMC-200 Mini-Cultivator can cultivate up to four inches in maximum depth.
- Q: Where can I find nylon lines of different varieties?
A: Nylon lines measuring .095 and .105 in weight are available in multiple varieties while the spool sizes vary between fifty feet up to five pounds.
- Q: Is there maintenance equipment specifically intended for the AST-7000?
A: Yes, there are maintenance tools like a Piston Pin Remover and Gear Shaft Remover that can assist in the devices maintenance.
User Manual
Loading...