Tamron P3000, P2000 User Manual

ProClick
®
Pronto
™™
™™
ProClick Pronto
®
P2000 - Bind Only Unit P3000 - Punch & Bind Unit
™™
™™
ENG
F
E
Operating Procedures
Manuel D'Utilisation Instrucciones de Manejo
High Productivity Binding
IMPORTANT
To quickly and easily confirm your warranty, register your new ProClick® ProntoTM at www.gbc.com
Visit GBC at www.gbc.com
COMMERCIAL PRODUCTS GROUP
712 W. Winthrop Avenue GBC Canada Addison, IL 60101-4395 49 Railside Road 800-772-9281 Don Mills, ON M3A 183 www.gbc.com CANADA
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
AN ACCO BRANDS COMPANY
©2005 ACCO Brands Corporation. All rights reserved.
ProClick
English 1
Français 7
Español 11
®
Pronto
™™
™™
ENG
7708600 / Rev # 11/07/2005
Please read these instructions carefully and keep them in a safe place for future reference.
Lisez attentivement le présent manuel et conservez-le en lieu sûr pour pouvoir en disposer
F
ultérierement.
Lea detenidamente el el manual de instrucciones y consérvelo para futuras consultas.
E
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
ProClick
®
Pronto
™™
™™
ENG
1.0 Safety
1.1 Safety Messages
The safety of you and others is very important to GBC. Important safety messages and information are contained within this manual as well as on the machine itself. Please be certain to carefully read and understand all of these before operating the machine.
The safety alert symbol precedes each safety message in this Operating Instructions manual. This symbol indicates a potential personal safety hazard that could hurt you or others.
Pronto
™™
™™
The following pictorial is found on the ProClick
®
This safety message means that you could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage. NEVER remove the machine’s outer cover. ALWAYS refer service requirements to qualified GBC personnel.
1.3.2 Electrical Safeguards:
™™
The ProClick® Pronto
™™
must be connected to a supply voltage
corresponding to the electrical rating in the machine operating instructions (also listed on the serial number label).
The socket-outlet shall be located near the equipment
and shall be easily accessible.
™™
Unplug the ProClick® Pronto
™™
before moving the machine or
whenever the machine is not in use for an extended period of time.
The grounding plug is a safety feature and will only fit into the
proper grounding-type power outlet. If you are unable to insert the plug into an outlet, contact a qualified electrician to have a suitable outlet installed. Do not alter the plug on the end of the cordset (if provided) of the ProClick® Pronto
™™
™™
. It has been
provided for your safety.
™™
Do not operate the ProClick® Pronto
™™
if the machine has a damaged power supply cord or plug. Do not operate the machine after any malfunction, if liquid has been spilled into the machine, or if the machine has been damaged in any way.
Do not overload electrical outlets beyond their capacity. To do
so can result in fire or electrical shock.
1.4 Service
™™
Do not attempt to service your ProClick® Pronto
Contact an authorized GBC service representative for any required repairs or major maintenance for your ProClick
™™
™™
Pronto
To contact a GBC service representative call:
Canada: 1-800-463-2545 US: 1-800-790-7787
™™
yourself.
®
This safety message means that you could be seriously hurt if flamable dusters or cleaners are used on this product.
Do NOT use aerosol dusters or cleaners.
Do NOT spray anything into the product.
Foreign substances can be explosive.
1.2 Safety Symbols
I Power ON O Power Off “Bind” means to bind a book “Set-Up” means to setup “Punch” means to punch paper or covers.
1.3 Important Safeguards
™™
Use the ProClick® Pronto paper and covers according to the indicated specifications.
1.3.1 General Safeguards:
Before operating the machine, make certain that the ProClick
™™
™™
Pronto
is placed on a secure, stable work area. This will
help to prevent the machine from falling and possibly causing personal injury and damage.
Retain this Operating Instructions manual for later use.
CAUTION: In case of emergency, use the power cord as a main disconnect device.
™™
only for its intended purpose of binding
WARNING: There are NO user-serviceable parts inside the machine. You could be seriously hurt or killed if you open the product and expose yourself to hazardous voltage.
1.5 Cleaning
™™
You may clean the exterior of the ProClick® Pronto
™™
using a soft,
damp cloth. Do not use detergents or solvents as damage to the machine may occur.
1.6 FCC Note
FCC Class A Notice
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which
®
case the user will be required to correct the interference at his own expense.
Canada Class A Notice
This Class A digital apparatus complies with Canadian ICES-003.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY ACCO BRANDS CORPORATION COULD VOID YOUR AUTHORITY TO OPERATE THE EQUIPMENT
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
ProClick
®
Pronto
™™
™™
ENG
2.0 Introduction
The GBC ProClick
®
ruggedly built and light enough for use on any table or desk.
®
The ProClick
Pronto
several features designed to make the process of mechanical binding as easy as 1-2-3 for the average office worker.
®
The ProClick
Pronto
professional binding.
®
The ProClick
Pronto
several unique design features:
The User Interface Panel guides the user through the binding
process with ease.
The ProClick
®
device that indicates to the user the spine size required just by placing the document into the document sizer.
The ProClick
slide the spine cassette into the spine slot, ProClick
Pronto
®
™™
™™
will automatically feed the spine onto the document.
These instructions have been prepared to acquaint you with the machine and its operation. Please read them carefully. Keep these operating instructions for future reference.
™™
™™
Pronto
Pronto
Pronto
is designed for easy operation. It is
™™
™™
is a unique binding system that incorporates
™™
™™
is also an Ideal solution for quick and
™™
™™
is a unique binding system that incorporates
™™
™™
provides an electronic measuring
™™
™™
handles the spine for you. Simply
®
4.0 Operating Instructions
4.1 Assembly - Setup
™™
Unpack the ProClick® Pronto table, desk or surface, capable of supporting 175 lbs. convenient to a power outlet.
Attach the power cord and follow the instructions carefully to operate your ProClick® Pronto
4.2 Powering the Machine
Power the machine with I/O Switch.
Machine will sound a “Beep” when
the power is turned on.
4.3 Punching
(Only for P3000 Model)
™™
and place on a secure, stable
™™
™™
.
(I/O)
3.0 Specification
P 3000 P 2000
Binder Paper Size Letter 11 x 8.5 inches
Binding Diameter Range
Up to 100 sheets or .400” (10mm)
Machine Weight 82.5 lbs (37.4kgs) 68.2 lbs (30.9kgs)
Packaged Weight 85.8 lbs (38.9kgs) 71.5 lbs (32.4kgs) Dimensions 19” x 21” x 19”
W x H x D (480 mm) x (532 mm) x (488 mm) Package Dimensions 26” x 26” x 28”
W x H x D (655 mm) x (655 mm) x (700 mm)
Electrical Amps
Frequency
Voltage
Power
Agency approval cCSAus
Required Testing FCC
5/16”, 1/2”, 5/8”
maximum with largest element
2.5 A
60 Hz 115 V
220 Watts
751 Btu
Insert the document to be punched into punch tray, align
paper to the left of tray and press “PUNCH” button.
Note:
Maximum 15 sheets of 20lb bound can be punched at a time.Do not attempt to punch more than 2 plastic covers at a time.
4.4 Sheet Capacity Guide
Approximate
Max. Sheet
Capacity
40 Small 5/16” (8mm)
70 Medium 1/2” (12mm)
100 Large 5/8” (16mm)
Sheet capacity is based on 20 lbs. (75 g/m
Spine Type
Spine Size
2
) bond paper
IMPORTANT
To quickly and easily confirm your warranty, register
your new ProClick
®
Pronto
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
™™
™™
at www.gbc.com
4.5 Binding
DISPLAY 1
Insert document into document sizer for the machine to
identify the document size as shown in Display 1.
The machine identifies the document in 3 different
sizes, “Small”, “Medium” and “Large”.
®
ProClick
In order to hide the spine seam of a completed document,
you must place the rear cover face to face on top of the front cover before you insert the document into the “Bind” sections as indicated in the above illustration.
Insert punched document into the binding slot (punched
side first)
Pronto
™™
™™
ENG
DISPLAY 2
Pronto
™™
™™
has measured the
Once the ProClick
document thickness, the display will indicate the correct spine size to load into the machine. The example shown in
Display 2 indicates “Small” under “Insert correct ProClick® spine size”.
The system will allow you to bind small documents with
larger spine sizes.
Insert the appropriate spine cassette into spine slot as
shown in Display 2.
®
DISPLAY 4
Press “BIND” to bind your document and remove the
document after you hear a BEEP.
Additional documents can be bound without resizing, if
binding books are of the same document size.
The ProClick® Pronto
stays idle for 2 minutes. You will need to resize your document to continue.
™ ™
™ ™
will time out to the first step if it
4.6 Editing your document
™™
The ProClick® Pronto can unbind the bound book for editing.
™™
has a special spine opener tool where you
To unbind a bound book, just insert the wedge of the spine opener
DISPLAY 3
tool into the loops of the ProClick® spine and pull forward in a sliding action. This opens the ProClick® allowing you to edit the documents and manually resecure the bind spine.
ACCO Brands Corporation, 300 Tower Parkway, Lincolnshire, IL 60069. www.gbc.com
Loading...
+ 10 hidden pages