Talk-a-Phone VOIP-500 Series Manual

OUTDOOR EMERGENCY PHONES

VOIP-500 – Single Button Native

VoIP Emergency Phone

Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone [phone] • [e-mail] • www.talkaphone.com.

All prices and specifications are subject to change without notice. Talk-A-Phone, WEBS, WEBS Contact and Scream Alert are registered trademarks of Talk-A-Phone Co. Cisco, the Cisco

logo, and Cisco Systems are trademarks or registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries. All rights reserved.

Description

The VOIP-500 Series Phone is an outdoor-rated, ADA-compliant hands-free
Voice over IP (VoIP) Emergency Phone for use in locations such as: parking
facilities, college campuses, medical centers, and industrial parks.

Features

• Exceptional sound clarity during conversation (over 90dB, configurable)
and paging (over 100dB, configurable)

• Unit can be paged remotely by security as part of Talk-A-Phone’s Wide-
Area Emergency Broadcast System (requires WEBS Contact® software)

• Ethernet connectivity and full IP compatibility with existing routers and
LAN infrastructure

• Additional Layer 2 switch Ethernet port to connect other devices (e.g. IP
Video Cameras)

• Supports standard SIP protocol

• Configuration and firmware upgrades through Web GUI

• Power over Ethernet (PoE, 802.3af), 12V DC, 24V AC/DC

• Cast metal raised letter and Braille signage for ADA compliance

• Vandal resistant stainless steel faceplate

• 1.5" diameter metal button painted with UV-resistant finish

• Auxiliary inputs and outputs to integrate with CCTV, LED Blue

Lights, Scream Alert®, Gates and other Access Points

• Three LED indicators for hearing impaired (call placed, call
received, help on the way)

• Built-in auto-dialer can dial six numbers: if first number doesn't
answer or is busy, dials next number

• Auto-answer allows security to monitor and initiate calls with
Emergency Phone

• Automatically inform the attendant of emergency phone location via recorded message

Specifications

Construction: 12 gauge (2.8mm) #4 brushed stainless steel faceplate
Dimensions: Front Panel: 9.5 (241) W x 11.75 (298) H in (mm)

Back Box: 6.4 (163) W x 9.75 (248) H x 2.71 (69) D in (mm)
Weight: 8 lbs (3.6 kg)
Storage Temperature: -40º F to +149º F (-40º C to +65º C)
Operating Temperature: -40º F to +131º F (-40º C to +55º C)
Relative Humidity: Up to 95% non-condensing
Protection: Circuit board conformal coated
Mounting: Flush mount (surface mount options available)
Communication: Full Duplex 2-way hands-free communication
Digit Capacity: Up to 30 digits, including pauses, for each of six phone numbers
Call Control Signaling: SIP (RFC3261 compliant)

NOTE: Not all features of the VOIP-500 Series Phone are available when used in conjunction with analog telephony adaptor devices or
with Public Switched Telephone Network (PSTN).

For example, the round robin dialing feature (See "VOIP-500 Configuration and Operation Manual", Section 4.5.1) and voice message
functionality (See "VOIP-500 Configuration and Operation Manual", Section 4.7) of the VOIP-500 Series Phone may not operate as
described in the manual when used in conjunction with equipment such as a Model VOIP-1-2-4-8 interface, 3rd party gateways, and/or
PSTN interfaces such as T1, PRI, or loopstart trunks.

Talk-A-Phone’s VOIP-500 Series Phone has tested compatible
with Cisco UCM 7.1 and UCM 8.6. The Cisco Compatible logo
signifies that Talk-A-Phone’s product has undergone
interoperability testing by Talk-A-Phone together with Cisco and
a third-party test house based on testing criteria set by Cisco.
Talk-A-Phone is solely responsible for the support and warranty
of its product. Cisco makes no warranties, express or implied,
with respect to Talk-A-Phone’s product or its interoperation with
the listed Cisco product(s) and disclaims any implied warranties
of merchantability, fitness for a particular use, or against
infringement.

VOIP-500 – Single Button Native VoIP Emergency Phone

Rev. 6/25/2012

Copyright 2012 Talk-A-Phone Co. • 7530 North Natchez Avenue • Niles, Illinois 60714 • Phone [phone] • [e-mail] • www.talkaphone.com.

All prices and specifications are subject to change without notice. Talk-A-Phone, WEBS, WEBS Contact and Scream Alert are registered trademarks of Talk-A-Phone Co. All rights reserved.

Audio Codecs: G.711 PCM a-Law @ 64kbps, G.711 PCM u-Law @ 64kbps, G.729a, G.723.1a
Power: Nominal: +12VDC (500mA), +24VAC/DC (300mA), or PoE (+36VDC - 57VDC, 150mA)
Max: +12VDC (800mA), +24VAC/DC (500mA), or PoE (+36VDC - 57VDC, 250mA)

NOTE: if not connecting PoE, a dedicated line regulated power supply required.
Auxiliary Contacts: 3 Aux Inputs: dry contact, 10mA @ 8VDC

3 Aux Outputs: dry contact, 120mA @ 120VAC/DC
Network: 10/100 BaseT Ethernet, RJ45 connectors, Cat 5e or better
Programming: Non-volatile Flash Memory programming and configuration through Web GUI
Configuration: Static IP address provisioning and DHCP client. Monitoring via Syslog application

Options & Accessories

"TO CALL" Casting: Use Model VOIP-500C for a button that reads TO CALL instead of EMERGENCY
Faceplate Camera: Add “3” to model number to add a color pinhole camera mounted discreetly behind the

faceplate.

Dimensional Diagram

All dimensions are in inches and are provided for reference only.