Talkaphone ETP-SMH User Manual

MOUNTING AN ETP-400 INTO AN ETP-SM

Bolts (Not Provided) for

Banding Brackets,

or
Screws (Not Provided)
For Mounting Directly

To a Wall

(2 or 4, As Appropriate)

ETP-400 ADA Compliant,

Hands-Free Emergency Phone

ETP-SM Surface Mount Accessory

EMERGENCY

LIGHT ON INDICATES CALL RECEIVED

Brackets for

Banding Straps,

If Used

(Not provided)

#10 Spanner Screw (6 Provided)

TALK-A-PHONE

RJ11 Connector For

Communication Line

Auxiliary Output Lead #1 (RED)
Auxiliary Output Lead #2 (ORANGE)
Auxiliary Input Lead (BROWN)
Common Wire (BLACK)

Talk-A-Phone Co.

7530 North Natchez Avenue, Niles Illinois 60714-3804

Phone: [phone] Fax: [phone]

e-mail: [e-mail] http://www.talkaphone.com

Rev. 7/27/09All Specifications and Prices Subject to Change

RECOMMENDED MOUNTING OF ETP-400

IN AN ETP-SM FOR ADA COMPLIANCE

CEILING

AS HIGH AS POSSIBLE, WITH MAXIMUM VISIBILITY

TOP OF ETP-SM

CENTER OF REAR CONDUIT HOLE

48"

41.5"

ETP-MBKT

BOTTOM CONDUIT HOLE

ETP-EL

WALL

CONDUIT FOR POWER

TO BLUE LIGHT/STROBE

CONDUIT FOR

AUXILIARY LEADS

FROM ETP-400 TO ETP-EL

CONDUIT FOR

COMMUNICATION LINE

OR

FINISHED FLOOR

7530 North Natchez Avenue, Niles, Illinois 60714-3804

e-mail: [e-mail] http://www.talkaphone.com

35"

Page 2 of 2All Specifications and Prices Subject to Change

Talk-A-Phone Co.

Phone: [phone] Fax: [phone]