Talius HPH-5003BT User Manual
Instructions:
1. Press to increase volume / Tap to skip to next song.
2. Separation of buttons.
3. Press to decrease volume / Tap to skip to previous song.
4. Power button / Receive call button.
5. USB charging port.
6. Hands free calls microphone.
7. AUX IN port.
Features:
1. Bluetooth Version: 4.0+ EDR.
2. Can be compatible to connect two mobiles at the same time .
3. Indicate the power battery information on iOS system phone.
4. Supports Bluetooth phone calls.
5. Built-in lithium battery, with Micro USB charging port.
2. Specifications:
2.0 Battery capacity: 300MAH，charging time：2.5H
2.1 transmission distance：CLASS‖
2.2 playing time：8-10H
2.3 standby time：450H
2.4 Frequency range：20-20KHZ
2.5 Sensitivity：115dB±3dB
2.6 Speaker impedance：32ohm
3.Operations:
3.1 BT function
：
3.1.1.Bluetooth pairing
：
1.For first time paring, press and hold the call key for 3 seconds to turn
on and blue light flash, press and hold the call press for 3 seconds for turn
off,the red light flash, press and hold call key for 5 seconds to pairing mode, the
light will flash in BLUE and RED light. Then turn on bluetooth function on
phone and work with Bluetooth then choose search device, after successful,
please click connect.
The paring function can be different from device to device. the blue light will
flash one time per 3 seconds after successfully pairing.
3.1.2Bluetooth play music
：
1.Find out the music, choose song to play, click the call button to play music,
click the call button again for pause play music
3.1.3 Volume control:
1、Press and hold on volume + it will increase volume and click press for next
song when playing music.
2.Press and hold on volume - it will dicrease volume and click press for
previous song when playing music.
3.1.4Bluetooth call
：
When there is an incoming phone call, short press key to answer the call, short
press it one more time to cancel the call. Press and hold key for 3 seconds to
switch the call back to your mobile. Press and hold on for 3 seconds to go back
again to Bluetooth answering
.
3.1.5two device connect by bluetooth
Firstly please make sure that one smartphone have connected
successfully with Bluetooth. Press and hold on key for turn off, then press and
hold on key for 5 seconds enter into pairing mode(the red and blue light
flash),Start to work bluetooth function of the second smartphone, choose
search bluetooth devices. Then click to connect after searching successfully,
then please back the first smartphone and click to connect the bluetooth
devices.
If two mobile phone call at the same time as the first through the ph
one call.
3.3Charging
：
Connect one side of the supplied cable to the charging port of the
headphone. Connect the other side to any USB charger or your computer USB
port. The headphone with indicate a red light. After charging full the light will
be blue light.
4
、
Accessories
：
1.AUX IN cable
Charging Cable(0.8m)
5
、
headphone size:
Loading...