THEMIS series
ALVIS TETRA
Ɣ
ALVIS TETRA
GF-ALV-T
Thank you for purchasing our product.
Please read through this manual carefully
beforeinstalling or using.
After reading, keep this operation manual
in a safe place for your future reference.
Contents
Operation/Installation Manual
General Safety Instructions
Preparation Before Installation
Parts Lists/Accessory Parts
Installation Procedure
How to use
Care and Maintenance
Specification Drawings
Version 1 June 2016
8
3
2
4
5
8
9
2
ڦBefore use
Please read through the "General Safety Instructions" to ensure you use this product correctly. This instruction
manual contains important information to help avoid personal injury, or property damages to you or your customers. All instructions are important for safe operation. Please be sure to observe them.
ŶDefinition of markings
This mark warns the user that "improper use may cause death or severe personal injury".
This mark warns the user that "improper use may cause personal injury or material damages".
CAUTION
This mark indicates that the user need to be ALERT to a possible danger.
This mark indicates what the user MUST DO to prevent accidents.
This mark indicates what the user SHOULD NOT DO.
General Safety Instructions
WARNING
WARNING
Do NOT apply water to the equipment.
The equipment is not waterproofed. Wetting may cause a
fire, electric shock, or insulation failure.
Be alert to the corner of the mirror
portion.
Be alert to the corner of the mirror so as not to hit it.
If hit, you may get injured.
Do NOT attempt to repair the unit by
yourself.
Do not attempt to disassemble or repair the equipment
on your own. To do so might cause break down or collapse
accident.Please contact us for repair or servicing instruction.
Follow the instructions of the installation
manual when connecting to the power supply.
Improper connection may cause breakdown.
Follow the directions of caution labels.
If a caution label is attached to the equipment,
follow the directions of the label.
Failure to follow the directions may cause a fire,
electric shock, falling, injury or breakdown.
Perform Class D grounding (previous Class 3
grounding) with the ground terminal (wire), if attached.
Improper grounding may cause electric shock or insulation
failure.
Do NOT alter or modify the equipment.
This may cause electric shock, falling, burnout
damage, or discoloration.
3
Preparation before Installation
CAUTION
Do NOT apply weight or Do NOT hit a thing
on the equipment.
Avoid leaning on the mirror, hard wiping of the mirror
when cleaning. Do not hit a drier etc. to the equipment.
This may cause deformation, breakage or falling accident
of the product.
Do NOT use the equipment outdoors.
This equipment is neither design for nor approved for
outside installation. If installed outdoors, there may be
a danger of a fire, electric shock, or failure.
Remove chemical immediately after attached.
If chemical such as hair dye, comes in contact with the
equipment, wipe it off immediately.This may cause
discoloration or deterioration.
Use this equipment at an ambient temperature
from 5 °C to 35 °C, and humidity from 45% to 85%.
When used at high temperature and high humidity, there may
be a risk of burnout damage, failure deformation discoloration.
When used at low temperatures,a fluorescent lamp may get dark
or may be turned on.
Prior to installation, determine the installation position of the product referring to the
specification drawings
.
z
z
Confirm the rated voltage and the power
supply voltage of the equipment.
If overvoltage is applied, a fire may start. Applying
overvoltage will shorten the life of lamp.
z
z
Ask a licensed electrician to perform electrical work.
Perform Class D grounding (previous Class 3 grounding) with the ground wire.
z
Confirm installation directions (up, down, left, right) of the equipment.
Provide 4 x power supply (13A or more / AC 230V) on the floor.
(See page 9 for recommended position.)
Frame
Mirror x2
Desk
Power outlet
(double x2)
LED switch
Cabinet
[Accessory parts]
Dryer holder x4
Wood screw for frame x6
Wood screw for dryer holder x16
Power plug x4
LED cable
ALVIS TETRA
Front panel x2
Power plug
for LED
Cable for outlet x4
Parts List/Accessory Parts
4
Position Cabinet in the desired location.
Before placing Desk, take off the wood covers on underneath(these are fixed by wood screws)
then take out the cables.
2
3 Connect Power plugs on Cabinet and Desk then lower Desk on Cabinet.
1
Installation Procedure
4
5
Pass LED cable through the hole on Desk.
Fix Frame with 6x wood screws.
Then connect the LED cable.
4
Connect the LED cable
LED cable
5
Secure 2 x Mirror to Frame carefully.
6 Wire Power plugs.(See recommended position on page.9 / Plug is NOT provided.)
6
PANDORA
8
How to Use
Using power outlet
Power outlets are provided on the both sides.
The total current of the power outlets are as follows.
Total 13A
or less
Total 13A
or less
Care and Maintenance
Dust the surface and remove stain.
Wipe the surface with soft and dry cloth. If the stain is hard to remove or oil is spotted,
wipe with cloth soaked in dilluted neutral detergent and wringed.Then wipe it with dry cloth.
Do not use volatile chemical such as thinner, alcohol, gasoline, kerosene, or abrasive, wax,
abrasive sponges and scrubbing brushes, etc.
z
z
z
Specification Drawings
9
Dimensions
700
800 800
1600
z
z
z
Rated voltage
Rated frequency
Mass
230V
50/60 Hz
170 kg
800
800
1600
2200
2000
5
5
2200
700
150
400
150
140
TAKARA BELMONT (UK) LTD.
BELMONT HOUSE, ONE ST.ANDREWS WAY, BOW LONDON
E3 3PA, UK
http:// www.takara.co.uk
TEL: +44(0)20 7515 0333
Top view
Provide 2 x power supply (13A or more / AC 230V ) each on the floor.
(Total 4 power supplies needed)
[mm]
Recommended position of power supply
Fix 4 x Dryer holder with wood screws.7
x4
x4
150mm 150mm
edge
7
Bottom view
Loading...