Tait TDAB1A, TDAH5A Users Manual

TD9300

KEY FEATURES

 Future proof multi-mode terminal (DMR Tier 3 & Wi-Fi)  Designed for SCADA communications, simplifies integration into SCADA networks  Full adherence to DMR standards, providing choice and interoperability  Automatic selection of DMR data services to maximise throughput and manage voice and data services  Flexible interfacing. Wide input voltage range and adjustable high power RF output, serial and Ethernet

interfaces for legacy and modern data terminal interfacing

 Engineered for use in demanding environments

Improve efficiency

 Monitor and control devices via long

range DMR, less travel, site visits

 Central diagnosis of faults enabling

optimum resource deployments.

 Secure, manage and maintain single

voice & data PMR network

Designed to perform in demanding environments

 Tough die-cast metal chassis for

protection in all environmental extremes

 Protection and fold back mechanisms

limit occurrences of hardware failure, service restored after fault cleared

 Flexible mounting systems, DIN rail in

both vertical and horizontal, on a 19 inch rack tray or wall mounted

Security

 Encryption protects data (128 bit AES

and 56 bit DES)

 Terminals must both register and be

authenticated to access the network

 Stun and revive to disable devices

Remote monitoring

 Extensive outstation diagnostics:

 Temperature  Signal (RSSI & BER and MER)  Antenna fault  Input voltage  Telemetry status

Standards based interface protocols

 Support for industry standard

protocols:

 DNP3 TCP/IP and UDP/IP  DNP3 Serial  IEC60870-5-101 and -104

 Eliminates costly proprietary protocol

integration and support

Applications

 Control of SCADA IED/RTU

equipment

 SCADA for oil & gas utilities  SCADA for control of irrigators  Remote or hard to reach AMR  Weather stations

Data services

 Packet data over traffic channels for

telemetry, SCADA and customer specific applications

 IP data for transparent traffic channel

transfers

 Control channel short data messages,

location, status and text

Flexible interfaces

 Two RS232 / RS485 serial interfaces

for legacy equipment connection

 Ethernet connection  2 digital input and 2 digital outputs to

monitor and control surrounding environment, fully isolated.

 Wi-Fi access point for local access,

re-configuration or upgrades

Designed for telemetry and data communications, Tait DMR offers a secure and reliable machine to machine data terminal based on the DMR Tier 3 trunking standard.

The TD9300 terminal has multiple data interfaces and the intelligence to simplify wide area DMR based connectivity, integrate quickly and transparently support data communications.

Preliminary Datasheet

S P E C I FI CA T IO NS

Optimised data reliability, Benefit from data and voice PMR

FEATURES AND BENEFITS

Backed up by our proven radio network expertise, the TD9300 is part of the Tait DMR solution portfolio that consists of terminals, infrastructure, applications, services and integration with third party interfaces to ensure that your organization can reap all the benefits of the spectrally-efficient DMR standard in a mission critical environment.

TD9300

Preliminary Datasheet

GENERAL

Power

8-30VDC @ 3.5A (25W output power) Standby: <90mA @ 24VDC

Dimensions

(WxDxH) 195mm x 150 mm x 85 mm

Operating temperature

-22F to 140F (-30C to 60C)

Water and dust protection

IP52

Frequency stability

±0.5ppm (-22F to 140F/-30C to 60C)

Channels

VHF, UHF, 700/800 MHz 12.5kHz spacing 2.5/3.125/5/6.25kHz increment/channel step

Weight lb (kg)

2.1lb

Mounting

DIN rail in both vertical and horizontal configurations, on a 19 inch rack tray or wall mounted

ESD rating

+/-4kV contact discharge and +/-8kV air discharge

Air interface standard

DMR: ETSI TS 102 361

Altitude

4570 meters (15000 feet) Mil-Std-810F 500.4, Proc2

Humidity

95% Relative Humidity thru Temp Cycle. IEC 60068-2-30

Vibration

3 Axis, Sine sweep 10-60Hz TIA_EIA 603B, 3.3.4.3

Indicators

5 status LEDs: Tx, Rx, Active, Fault, Service (trunking)

Packet Data

½ Rate, ¾ Rate, Full rate, Single Slot

Wi-Fi access point

Standard: IEEE 802.11b and g Encryption: WEP, WPA and WPA2 Authentication: Extensible Authentication Protocol (EAP)

TRANSMITTER

Output power

VHF 136-174MHz 25W: 25W, 12.5W, 5W, 1W

UHF 400-470MHz 25W: 25W, 12W, 5W, 1W

762-870MHz 30/35W

FM Hum and noise (Analog)

12.5kHz: -40dB

12.5kHz: 40dB

Adjacent channel power – static (DMR)

ETS 300-113

12.5kHz: 60dB

Conducted/radiated emissions

25W: -36dBm 50W: -20dBm

25W: -36dBm 40W: -20dBm

Duty Cycle

5W 80% @ 25˚C 25% @ 60˚C 12W 75% @ 25˚C 20% @ 60˚C 25W 65% @ 25˚C 15% @ 50˚C

RECEIVER

VHF 136-174MHz

UHF 400-470MHz

762-870MHz

Sensitivity (DMR) 5% BER

-119dBm (0.25µV)

Intermodulation rejection (EIA603D)

76dB

75dB

Intermodulation rejection (ETS 300)

70dB

Spurious response rejection (DMR) (ETS 300-113)

70dB

FM hum and noise (Analog)

12.5kHz: -40dB

Conducted spurious emissions

-57dBm

Selectivity (Analog) EIA603D (2 Tone)

12.5kHz: 52dB

12.5kHz: 50dB

Selectivity (Analog) ETS 300-086

12.5kHz: 62dB

12.5kHz: 60dB

Specifications are subject to change without notice and shall not form part of any contract. They are issued for guidance purposes only. All specifications shown are typical.

* Tait cannot guarantee full performance to the published specifications when the radio is operating at frequencies outside the specified range.

For further information please check with your nearest Tait office or authorized dealer.

Tait Limited facilities are certified for ISO9001:2008 (Quality Management System), ISO14001:2004 (Environmental Management System) and ISO18001:2007 (Occupational Health and Safety Management System) for aspects associated with the design, manufacture and distribution of radio communications and control equipment, systems and services. In addition, all our Regional Head Offices are certified to ISO9001:2008

The word “Tait” and the Tait logo are trademarks of Tait

Limited.

REGULATORY DATA

USA

Canada

Europe

Australia/New Zealand

VHF (136-174MHz)

CFR 47

RSS-119

EN300-086, EN300-113, EN300-219 EN301-489, EN60950

AS/NZS4295 UHF (400-470MHz)

CFR 47

RSS-119

EN300-086, EN300-113, EN300-219 EN301-489, EN60950

AS/NZS4295 AS/NZS4365*

700/800MHz

CFR 47

RSS-119

S P E C I FI CA T IO NS

Tait TDAB1A, TDAH5A Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual