DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
User Manual
Bointec Wifi Series
DPE109A / DPE104A
[ Version
Date: 2018/09/12
1.0 ]
Bointec Taiwan Corporation
1F,#3,A20,L790,SEC5,CHUNGHSIAO E.RD.,TAIP EI 110,TAIWAN
Tel: +886-2-2759-0081 / Fax:+886-2-2759-1659
www.bointec.com
© Copyrights 2012 by Bointec Taiwan
All rights reserved
(This document subject to change without notices, please logon Bointec support website if you need latest update)
Bointec DPE109A / DPE104A User Manual Page 1 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
Release history:
Revision Date Author Change List
1.0 2018/09/12 Howard Juang Initialized
IMPORTANT NOTICE
COPYRIGHT
Copyright©2012, BOINTEC TAIWAN Co., LTD. All rights reserved.
TRADEMARKS
BOINTEC TAIWAN products are exclusively owned by BOINTEC TAIWAN Co., LTD. References to other companies and their products use
trademarks owned by the respective companies and are for reference purpose only.
CONFIDENTIALITY
The information contained here (including any attachments) is confidential. The recipient here acknowledges the confidentiality of this document, and
except for the specific purpose, this document shall not be disclosed to any third party.
WARRANTY DISCLAIMER & NO GUARANTEE
BOINTEC TAIWAN makes no representations or warranties, either express or implied, by or with respect to anything in this document, and shall not
be liable for any implied warranties of merchantability or fitness for a particular purpose or for any indirect, special or consequential damages. Our
company have right to modify the document according to technical requirement with no announcement to the customer.
PRODUCT WARRANTY
Bointec warrant that each of its products will be free from material and workmanship defects for a period of one year from the invoice date. If the
customer discovers a defect, Bointec will, at its option, repair or replace the defective product at no charge to the customer, provided it is returned
during the warranty period of one year, with transportation charges prepaid. The returned product must be properly packaged in its original
packaging to obtain warranty service.
If the serial number and the product shipping data differ by over 30 days, the in-warranty service will be made according to the shipping date. In the
serial numbers the first and second two digits give the year of manufacture, and the last first and second digit means the month (e. g., with -10 for
October, -11 for November and -12 for December). For example, the serial number 070000-10 means October of year 2007.
Bointec DPE109A / DPE104A User Manual Page 2 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
Bointec DPE109A / DPE104A User Manual Page 3 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
Contents
1 Packing List ............. .. .. .. .. ... .. .. .. .. ............................. .. ............................ ................................... 5
2 Customer Service .................................................................................................................... 5
3 Safety and Warranty ................................................................................................................ 6
4 Introduction .............................................................................................................................. 7
4.1 Product overview .................................................................................................................. 7
4.2 Reference Documents .......................................................................................................... 8
5 Mechanical Specification ........................................................................................................ 8
5.1 Main Module .......................................................................................................................... 8
6 Hardware Specification .......................................................................... 錯誤! 尚未定義書籤。
7 Software Installation .............................................................................................................. 11
7.1 Driver installation under Windows systems ................... .. .. .. ........................ .................... 11
7.2 Driver pickup by Linux Android systems .............................. .. .. ... .. .. .. .. ... .. .. .. .. .. ... .. .. .. .. .. ... 15
Appendix A: GENERAL NMEA-0183 FORMAT ............................................................................ 16
Appendix B: GENERAL AT Commands for GSM/3G/3.75G data modem module 錯誤! 尚未定義
書籤。
Disclaimer ...................................................................................................................................... 16
Bointec DPE109A / DPE104A User Manual Page 4 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
1 Packing List
Before you use this Product, you m ay want to check what the items are inside the package:
z DPE109A / DPE104A module
z Accessory Pack (optional)
z 2.4GHz antenna, simple, Bointec P/N: TWRN-9161201-102
z Driver and User Manual CD
If any of these items are missing or damaged, contact your distributor or sales representat i ve
immediately.
2 Customer Service
We provide service guide for any problem as follow steps：
z Contact with your distributor, sales representative always as first step, as they are able to
provide you enough inf ormation to answer your question.
z Email to Bointec Customer Service, we stand behind first line services if they are not able to
help you for some advanced technical issues or additional assistance.
You may have the following inf ormation ready before you inquiry for support：
z Product serial number
z Peripheral attachments
z Software (OS, version, application software, etc.)
z Descript ion of complete prob lem
z The exact wording of any error messages
Free technical support is available from distributer and Bointec Customer Service every business
Bointec DPE109A / DPE104A User Manual Page 5 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
day. We are always ready to give advice on application req u i re ments or specific information on the
installation and operation of an y of our p roducts. D
address is available at : <support@bointec.com>
3 Safety and Warranty
Read these safety instructions carefully:
z Refer to this user manual from time to time if you need to know something more about the product.
Keep this user manual document for later reference.
z Please disconnect this equipment from any power source before cleaning. Do not use liquid or
spray detergents for cl eaning. Use a damp cloth.
z For pluggable equipment, the power outlet must be installed near the equipment and must be easily
accessible.
z Keep this equipment aw ay from humidity.
z Install this equipment on a reliable surface during installation. Dropping it or letting it fall could
o not hesitate to contact us, Supporting email
cause damage.
z The openings on the enclosure are for air convection. Protect the equipment from overheating. DO
NOT COVER THE OPENINGS.
z Make sure the voltage of the power source is correct before connecting the equipment to the power
outlet.
z Position the power cord so that people cannot step on it. Do not place anything over the power
cord.
z All cautions and warnings on the equipment should be noted.
z If the equipment is not used fo r a long time, disconnect it from the power source to avoid damage
by transient over-voltage.
z Never pour any liquid into an opening. This could cause fire or electrical shock.
z Never open the equipment. For safety reasons, only qualified service personnel should open the
equipment.
Bointec DPE109A / DPE104A User Manual Page 6 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
z If any of the following situations arises, get the equipment checked by s ervice personnel:
The power cord or plug is damaged.
A.
B.
Liquid has penetrated into the equipment.
C.
The equipment has been exposed to moisture.
D.
The equipment does not work well, or you cannot get it to work according to the user manual.
E.
The equipment has bee n dropped and damaged.
F.
The equipment has obvi ous signs of breakage.
z Generally, do not leave this equipment in an uncontro lled environment where the s torage
temperature is belo w -20° C (-4°F) or above 60° C (140° F). It may damage the equipment. Unless
we describe it in the Specification, the product itself is an industrial grade product. Even if so, do
not store the product that exceeds the limitation of the product endurance.
4 Introduction
This specification wrote as a guideline for DPE109A/DPE104A installation and apply to use. Any
change will not process unless this document changed.
4.1 Product overview
Bointec DPE109A/DPE104A is a dual band 802.1 1a c/a/b/g/n Dual-Band WiF i + Bluetooth
miniPCIe adapter. It is a 2T2R (WiFi/BT co-existence supported) technology, with 20/40/80MHz
and 256-QAM to maximize bandwidth. DPE109A/DPE104A lets you move at the speed of life
with faster speeds (up to 867 Mbps, 1~3Mbps EDR for Bluetooth), higher capacity, broader
coverage and longer battery life. Dramatically reshapes your connected experience.
Bointec DPE109A/DPE104A incorporated with advanced security encryption, such as WEP, WPA,
Bointec DPE109A / DPE104A User Manual Page 7 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
WPA2, and 802.1x for secure wireless connect ion.
Bointec DPE109A/DPE104A also supports the latest Bluetooth 4. 2 s pe cification, which includes
both High Speed and Low-Energy operation to extend personal area connectivity to a variety of
devices.
DPE109A/DPE104A also delivers superior WLAN/Bluetooth coexistence to ensure the best
possible wireless experience . DPE109A/DPE104A offers advanced algorithms developed to
mitigate interference and ta kes a dv antage of the physical proximity of the WLAN and Bluetooth
radios to provide maximum performance.
With the de mand of industrial temperature, Bointec DPE104A, with component upgrade to higher
tolerance, could meet the industrial standard reliability.
4.2 Reference Documents
z Bointec DPE109A DPE104A product speciation document
5 Mechanical Specification
5.1 Main Module
DPE109A / DPE104A module as below :
Bointec DPE109A / DPE104A User Manual Page 8 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
Figure 1. Top View Figure 2. Bottom View
Bointec DPE109A / DPE104A User Manual Page 9 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
6 Installation
Please make sure the platform is turned off and insert the Wireless Adapter DPE109A/DPE104A into
the mPCIe slot of your platform at a 45 degree.
Bointec DPE109A / DPE104A User Manual Page 10 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
7 Software Installation
7.1 Driver installation under Windows systems
1.Click [Qualcomm Atheros QCA6174_9377_Installer].
2.Select an interface language, and then click [Next].
Bointec DPE109A / DPE104A User Manual Page 11 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
3.Click [Install] to begin the driver installation and follow Install SHield Wizard.
Bointec DPE109A / DPE104A User Manual Page 12 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
4.Click [Finish] to complete the installation.
Bointec DPE109A / DPE104A User Manual Page 13 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
7.2 Join a Wireless Network
1. Click [Network icon] on the task bar. Select your Wi-Fi network and click [Connect].
2. Enter the correct password of the network and click [Next].
3. When it shows [Connected] as the picture below, then you can enjoy wireless access to Internet now.
Bointec DPE109A / DPE104A User Manual Page 14 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
7.3 Driver pickup by Linux Android systems
Linux driver are provided for user who would like to install DPE109A / DPE104A under Linux/Android
system. For these systems are usually used by experienced users. We simple attach driver package in the
driver CD for experienced users to deploy. If you encounter any issue when install driver package or during
the procedure, please contact Bointec filed application engineer team.
Bointec DPE109A / DPE104A User Manual Page 15 of 16
DPE109A/DPE104A 802.11abgn/AC 2T2R with BT4.2 miniPCle Card User Manual
______________________________________________________________________________________________
Appendix A:
Disclaimer
THESE MATERIALS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY”
OF ANY KIND, EITHER EXPRESS OR IMPLIED , INCLUDING BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
OR NON-INFRINGEMENT.
We uses reasonable efforts to include accurate and up-to-date information on this document; it
does not, however, make any representations as to its accuracy or completeness of the
information, text, graphics, links or other items contained within these materials. Your use of this
Document is at your own risk. Bointec, its suppliers, and other parties involved in creating and
delivering this Document’s contents shall not be liable for any special, indirect, incidental, or
consequential damages, including without limitation, lost revenues or lost profits.
© Bointec Taiwan Corporation Limited 2012
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys
no license under any patent or other right, nor does the publisher assume liability, for any consequence of its use;
specifications and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced, in
whole or in part, without the written consent of the publisher. Any copying, use or disclosure of it without the written
permission of Bointec Taiwan Corporation Limited is strictly prohibited
Bointec DPE109A / DPE104A User Manual Page 16 of 16
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
This device meets all the other requirements specified in Part 15E, Section
15.407 of the FCC Rules.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter
or antenna.
As long as 2 conditions above are met, further transmitter
required. However, the OEM integrator is still responsible for testing their
end-product for any additional compliance requirements required with this
module installed
IMPORTANT NOTE: In the event that these conditions can not be met
example certain laptop configurations or co-location with another transmitter),
then the FCC authorization is no longer considered valid and the FCC ID can
not be used on the final product. In these circumstances, the OEM integrator
will be responsible for re-evaluating the end product (including the transmitter)
and obtaining a separate FCC authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed such that 20 cm may be maintained between the antenna and users. The final
end product must be labeled in a visible area with the following: “Contains FCC ID:
2AMAF-DPE109A104A”. The grantee's FCC ID can be used only when all FCC
test will not be
(for
compliance requirements are met.
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the
end product which integrates this module.
The end user manual shall include all required regulatory information/warning
as show in this manual.
Industry Canada statement:
This device complies with ISED’s licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not cause harmfu l interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) le
dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit
accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
greater than 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements ISED
établies pour un environnement non contrôlé. Cet équipement doit être installé et
utilisé à plus de 20 cm entre le radiateur et votre corps.
This device is intended only for OEM integrators under the following conditions: (For
module device use)
1) The antenna must be installed and operated with greater than 20cm between the
antenna and users, and
2) The transmitter module may not be co-located with any other transmitter or
antenna.
As long as 2 conditions above are met, further transmitter test will not be required.
However, the OEM integrator is still responsible for testing their end-product for any
additional compliance requirements required with this module installed.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions
suivantes: (Pour utilisation de dispositif module)
1) L'antenne doit être installé et exploité avec plus de 20 cm entre l'antenne et les
utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur
l'émetteur ne seront pas nécessaires. Toutefois, l'intégrateur OEM est toujours
responsable des essais sur son produit final pour toutes exigences de conformité
supplémentaires requis pour ce module installé.
IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the Canada authorization
is no longer considered valid and the IC ID can not be used on the final product. In
these circumstances, the OEM integrator will be responsible for re-evaluating the end
product (including the transmitter) and obtaining a separate Canada authorization.
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines
configurations d'ordinateur portable ou de certaines co-localisation avec un autre
émetteur), l'autorisation du Canada n'est plus considéré comme valide et l'ID IC ne
peut pas être utilisé sur le produit final. Dans ces circonstances, l'intégrateur OEM
sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une
autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be
installed and operated with greater than 20cm between the antenna and users. The
final end product must be labeled in a visible area with the following: “Contains IC:
23942-DPE109A104A”.
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un appareil où
l’antenne peut être installée et utilisée à plus de 20 cm entre l’antenne et les
utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription
suivante: "Contient des IC: 23942-DPE109A104A ".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user
regarding how to install or remove this RF module in the user’s manual of the end
product which integrates this module.
The end user manual shall include all required regulatory information/warning as
show in this manual.
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur
final quant à la façon d'installer ou de supprimer ce module RF dans le manuel de
l'utilisateur du produit final qui intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires
requises et avertissements comme indiqué dans ce manuel.
Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) for devices with detachable antenna(s), the maximum antenna gain permitted for
devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the
equipment still complies with the e.i.r.p. limit;
(iii) for devices with detachable antenna(s), the maximum antenna gain permitted for
devices in the band 5725-5850 MHz shall be such that the equipment still complies with
the e.i.r.p. limits as appropriate;
(iv) where applicable, antenna type(s), antenna models(s), and worst-case tilt angle(s)
necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in
section 6.2.2.3 shall be clearly indicated.
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions
précises sur les restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés
uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
(ii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne
permis pour les dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à
5 725 MHz doit être conforme à la limite de la p.i.r.e;
(iii) pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne
permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être
conforme à la limite de la p.i.r.e. spécifiée, selon le cas;
(iv) lorsqu’il y a lieu, les types d’antennes (s’il y en a plusieurs), les numéros de
modèle de l’antenne et les pires angles d’inclinaison nécessaires pour rester conforme
à l’exigence de la p.i.r.e. applicable au masque d’élévation, énoncée à la
section 6.2.2.3, doivent être clairement indiqués
DET ACHABLE ANTENNA USAGE
This radio transmitter (IC: 23942-DPE109A104A / Model: DPE109A) has been approved by
ISED to operate with the antenna type listed below with maximum permissible gain indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated
for that type, are strictly prohibited for use with this device.
Le présent émetteur radio (IC: 23942-DPE109A104A / Model: DPE109A) a été approuvé par
ISED pour fonctionner avec les types d'antenne énumérés ci-dessou s et ayant un gain
admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est
supérieur au gain maximal indiqué, sont strictement interdits pour l 'exploitation de l'émetteur.
Approved antenna(s) list
Antenna Set 1
Transmitte
r Circuit
Chain (0) WNC 81-EBJ15.005 PIFA 3.00
Chain (1) WNC 81-EBJ15.005 PIFA 3.62
Transmitte
r Circuit
Chain (0) INPAQ
Chain (1) INPAQ
*The RF cable is use with antenna set 2
Brand Model
Brand Model
DAM-I6-H-DB-800-10-
17
DAM-I6-H-DB-800-10-
17
2.4GHz Gain
Ant.
with cable
Type
loss (dBi)
Antenna Set 2
2.4GHz
Ant.
Gain with
Type
cable loss
(dBi)
Dipole 1.13
Dipole 1.29
Cable Spec.
5GHz Gain
with cable
loss (dBi)
Band 1&2:
2.56
Band 3: 4.76 Band 3: 1.74
Band 4: 4.76 Band 4: 1.79
Band 1&2:
3.08
Band 3: 3.31 Band 3: 1.74
Band 4: 2.42 Band 4: 1.79
5GHz Gain
with
cable loss (dBi)
Band 1&2:
1.33
Band 3: -0.63
Band 4: -0.97
Band 1&2:
1.94
Band 3: -0.49
Band 4: -0.93
2.4GH
z
Cable
Loss
(dBi)
1.15
1.15
2.4GH
z
Cable
Loss
(dBi)
2.0±
0.5
2.0±
0.5
5G Cable
Loss
(dBi)
Band 1&2:
1.70
Band 1&2:
1.70
5G Cable
Loss
(dBi)
4.0±0.5
4.0±0.5
Connector
IPEX 300
IPEX 300
Connector
SMA RP
SMA RP
Type
Ant.
Type
Plug
Plug
Cable
Lengt
h
(mm)
Cable
Lengt
h
(mm)
900
900
Brand Model
INPAQ 14012-00040100 -0.35 -0.39 42
Transmitter
Circuit
Brand Model Ant. Type
2.4GHz cable loss
(dBi)
Antenna Set 3
5GHz cable loss
(dBi)
2.4GHz Gain
with
cable loss
(dBi)
Cable
Length (mm)
5GHz Gain
with cable loss
(dBi)
Connector
Type
Cable Connector
Type
IPEX to SMA RP
Plug
Cable Length
(mm)
Chain (0) Molex 479504012 Dipole 2.13 2.81 I-PEX MH4 300
Chain (1) Molex 479504012 Dipole 2.13 2.81 I-PEX MH4 300
Antenna Set 4
Transmitter
Circuit
Chain (0) BOINTEC TWRN-9161202-101 Dipole 2.0 2.0 RP SMA
Chain (1) BOINTEC TWRN-9161202-101 Dipole 2.0 2.0 RP SMA
*The RF cable is use with antenna set 4
Brand Model Ant. Type
Cable Spec.
2.4GHz Gain
with
cable loss (dBi)
5GHz Gain with
cable loss (dBi)
Ant. Connector
Type
Brand Model
Bointec TWRB-003EQ01-210
Transmitter
Circuit
Chain (0) BOINTEC TWRN-9161201-102 Dipole 3.17 2.61 RP SMA
Chain (1) BOINTEC TWRN-9161201-102 Dipole 3.17 2.61 RP SMA
*The RF cable is use with antenna set 5
Brand Model
Bointec TWRB-003EQ01-300 0.3 0.24 300 IPEX to RP SMA
Brand Model Ant. Type
2.4GHz cable loss
(dBi)
0.27 0.21
Antenna Set 5
Cable Spec.
2.4GHz cable loss
(dBi)
5GHz cable loss
(dBi)
2.4GHz Gain
with
cable loss (dBi)
5GHz cable loss
(dBi)
Cable
Length (mm)
210 IPEX to RP SMA
5GHz Gain with
cable loss (dBi)
Cable
Length (mm)
Cable Connector
Ant. Connector
Cable Connector
Type
Type
Note:
1. Above antenna gains of antenna are Total (H+V).
Type
Loading...