Taiden HCS-8130M series Installation And Operating Manual
HCS-8130M Series Professional Audio & Video Recorders
Professional Audio & Video Recorders for Conference
Installation and Operating Manual
V 1.4
Remark:
All rights reserved for translation, reprint or reproduction
Contents may change without prior announcement
All technical specifications are guideline data and not guaranteed features
Taiden Co., Ltd. is not responsible for any damage caused by improper use of this manual
The equipment must be connected to earth!
This product conforms to the rules of the European directive 2004/108/EC.
To protect your hearing, avoid high pressure level on earphones. Adjust to a lower and convenient level.
If any detailed information is needed, please contact your local agent or TAIDEN service center in your
region. Any feedback, advice and suggestion about the products is appreciated
TAIDEN is the registered trademark of TAIDEN Co., Ltd.
I
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
6. The MAINS plug serving as a disconnection device,
should be easy to operate.
7. The apparatus should be connected to the MAINS
socket-outlet with protective earth.
8. Clean only with dry cloth.
9. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
10. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
11. Do not defeat the safety purpose of the polarized or
18. Power supply cords:
AC 100 V-120 V 60 Hz or AC 220 V-240 V 50 Hz
19. For service, please contact the nearest TAIDEN
Service Center.
20. All TAIDEN products are guaranteed for definite time
(see the WARRANTY CARD for details) excluding the
following cases:
A. All damage or malfunction caused by human
negligence;
B. Damage or malfunction caused by improper
operating by operator;
C. Parts damage or loss caused by disassembling
the product by non-authorized personnel.
21. Use ONLY specified connection cable to connect the
system equipment.
22. Upon receipt of the product, please fill out the Warranty
Card enclosed and post it to TAIDEN Service Center.
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade and the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
12. Protect the power cord from being walked on or
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
13. Only use attachments/accessories specified by the
manufacturer.
14. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury
from tip-over.
15. Unplug this apparatus during lightning storms or when
unused for long periods of time.
16. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
17. Do not place the equipment on any uneven or unstable
stand; original product package or appropriate package
should be used to avoid damage caused by strong
impacts during transportation.
CAUTION: To reduce the risk of electric shock,
DO NOT open covers, no user serviceable parts
inside. Refer servicing to qualified service
personnel only.
CAUTION: DO NOT use alcohol, ammonia or
petroleum solvents or abrasive cleaners to
clean the devices.
The lightning flash with an arrowhead symbol, with
an equilateral triangle, is intended to alert the user to
the presence of uninsulated ‘dangerous voltage’
within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within an equilateral triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
II
Important Safety Instruction
WARNING: To reduce the risk of fire or
electric shock, DO NOT expose units to rain
or moisture.
Attention: Installation should be performed by
qualified service personnel only in accordance
with the National Electrical or applicable local
codes.
Power Disconnect: Units with or without ON – OFF
switch have power supplied to the unit whenever the
power cord is inserted into the power source;
however, the unit is operational only when the ON –
OFF switch is in the ON position. The power cord is
the main power disconnect for all units
WARNING: The apparatus should be
connected to a mains socket outlet with a
protective earthing connection.
III
Contents
Installation & User Guide........................................................................................................... V
Chapter 1: Professional Audio & Video Recorders for Conference ............................................1
1.1 Functions and indications .................................................................................................................................2
1.1.1 Front panel ..................................................................................................................................................................2
1.1.2 Backside......................................................................................................................................................................3
1.2 Installation.........................................................................................................................................................5
1.2.1 HDD Installation ..........................................................................................................................................................5
1.2.2 Fixed in cabinet ...........................................................................................................................................................7
1.3 Connection........................................................................................................................................................8
1.4 Configuration and operation .............................................................................................................................9
1.4.1 Set........................................................................................................................................................................... …9
1.4.2 State..........................................................................................................................................................................10
Chapter 2: Recorder Control ....................................................................................................12
2.1 Video Settings.................................................................................................................................................13
2.2 Recording Search ...........................................................................................................................................14
2.2.1 Meeting .....................................................................................................................................................................14
2.2.2 Date...........................................................................................................................................................................14
2.3 Audio Settings.................................................................................................................................................15
2.4 Network Settings.............................................................................................................................................15
2.5 Storage Management .....................................................................................................................................16
2.6 System Information .........................................................................................................................................16
Chapter 3: TAIDEN Digital Audio & Video Recording System Software ................................... 18
3.1 Installation and Running .................................................................................................................................18
3.1.1 Running Environment................................................................................................................................................18
3.1.2 Installation .................................................................................................................................................................18
3.1.3 Software Running......................................................................................................................................................18
3.2 Management ...................................................................................................................................................19
3.2.1 Device Management .................................................................................................................................................20
3.2.2 Channel List ..............................................................................................................................................................22
3.2.3 Disk Information ........................................................................................................................................................23
3.3 Meeting ...........................................................................................................................................................24
3.3.1 Connect to server ......................................................................................................................................................24
3.3.2 Meeting management................................................................................................................................................25
3.4 Preview ...........................................................................................................................................................27
3.5 PlayBack .........................................................................................................................................................30
3.6 Download ........................................................................................................................................................32
Chapter 4: Specifications..........................................................................................................36
4.1 Physical characteristics...................................................................................................................................36
4.2 Electrical characteristics .................................................................................................................................36
Appendix A: Calculational Methods of Total Harddisk Capacity................................................37
IV
Installation & User Guide
About this manual
This manual is a comprehensive guide to the
installation and operation of
Series Professional Audio & Video Recorders for
Conference. It includes the detailed description of the
functions and interfaces of the HCS-8130M Series
Professional Audio & Video Recorders for Conference,
system connection and installation, system set-up and
operation.
The manual is divided into the following chapters:
Chapter 1: Professional Audio & Video Recorders
for Conference
Detailed descriptions of the functions and indications,
installation and connection, configuration and operation
of the HCS-8130M Series Professional Audio & Video
Recorders for Conference.
Chapter 2: Recorder Control
Detailed descriptions of the recorder control via monitor
and mouse.
Chapter 3: T AIDEN Digit al Audio & V ideo Recording
System Software
Detailed descriptions of the installation, running and
operation of the TAIDEN Digital Audio & Video
Recording System Software.
Chapter 4: Specifications
the TAIDEN HCS-8130M
This manual is applicable to:
HCS-8131M
Professional Audio & Video Recorder for Conference
(4 CHs composite video input with D1 resolution, 1 CH
VGA input, 4 CHs audio input)
HCS-8132M
Professional Audio & Video Recorder for Conference
(8 CHs composite video input with D1 resolution, 1 CH
VGA input, 8 CHs audio input)
HCS-8133M
Professional Audio & Video Recorder for Conference
(1 CH SDI input with 1080p resolution, 1 CH VGA input,
4 CHs audio input)
HCS-8134M
Professional Audio & Video Recorder for Conference
(2 CHs SDI input with 1080p resolution, 1 CH VGA
input, 8 CHs audio input)
Main technical parameters of HCS-8130M Series
Professional Audio & Video Recorders for Conference.
V
Chapter 1: Professional Audio & Video Recorders for Conference
TAIDEN HCS-8130M Series Professional Audio &
Video Recorders for Conference are professional
video/audio recorders for conference system. Using
embedded processor and embedded operation system,
integrated several techniques in IT domain, including
video/audio compressing and decompressing, mass
disk storage, TCP/IP control etc., realized powerful
functions of video/audio compressing, video/audio
recording and playback, and network transferring.
Features:
■ Cooperating with TAIDEN conference system,
synchronously records conference video & audio
information
■ Automatically records speaking delegate(s) and the
panorama of the venue - saves data as digital files
■ Index and sort facility of video & audio recorded file
(by conference name, speaker, begin time, end
time, etc.)
■ Recorded file playback, fast play, backward,
pause/stop, etc.
■ Audio/video files saved on harddisk for download
■ During AV recording, all channels can be monitored
with earphones
■ Network monitoring facility
■ Variety of control methods and MMI to facilitate
administrator’s and users’ tasks
■ Visual, interactive, cooperative play function
■ Supports central control system for the
management and operation of the equipment
■ Recording file adopts a common standard format
■ Single system scalable to support multiple
concurrent meetings simultaneously recording live
■ With DSP processing chips, embedded operating
system, stable and reliable due to immunity to
network virus attacks
Product types:
HCS-8131M
Professional Audio & Video Recorder for Conference
(4 CHs composite video input with D1 resolution, 1 CH
VGA input, 4 CHs audio input)
HCS-8132M
Professional Audio & Video Recorder for Conference
(8 CHs composite video input with D1 resolution, 1 CH
VGA input, 8 CHs audio input)
HCS-8133M
Professional Audio & Video Recorder for Conference
(1 CH SDI input with 1080p resolution, 1 CH VGA input,
4 CHs audio input)
HCS-8134M
Professional Audio & Video Recorder for Conference
(2 CHs SDI input with 1080p resolution, 1 CH VGA
input, 8 CHs audio input)
1
1.1 Functions and indications
1.1.1 Front panel
Figure 1.1 Front panel of HCS-8130M Series Professional Audio & Video Recorders for Conference
Figure 1.1:
1. Reserved
2. “STANDBY” button and indicator
a. Switches to red in standby mode;
b. Switches to blue when operating.
3. “MENU” button
4. “Õ” (Left) button
Press this button to cursor to the left or to decrease
the parameter.
5. “Ö” (Right) button
Press this button to cursor to the right or to
increase the parameter.
6. “EXIT” button
7. Monitoring channel select knob
After monitor and mouse are connected, and the
recorder is controlled by the OSD software, the
monitoring channel cannot be adjusted via this
knob.
8. A type USB interface
To plug-in a USB stick or mouse.
9. Monitoring volume adjust knob
Knob to adjust the volume of the monitoring
channel.
10. Monitoring earphone interface
Earphone jack (Ø 3.5 mm).
11. Indicating light (red)
“RECORDING”: indicator flashes when
recording;
“HDD” indicator light will be keep on, when disk
lost, error or full of use;
“LAN”: indicator will be turned on if data are
received or transmitted at Ethernet port;
“F1”：indicator light will be turn on when the
number of video data reach 10 months;
“F2”, “F3”: reserved.
12. Menu display
2
1.1.2 Backside
Rear panel of HCS-8131M
Rear panel of HCS-8132M
Rear panel of HCS-8133M
Rear panel of HCS-8134M
Figure 1.2 Rear panel of HCS-8130M Series Professional Audio & Video Recorders for Conference
3
Figure 1.2:
13. Audio output
14. Reserved
15. HDMI output
16. VGA output
17. VGA input
18. Extension interface - reserved
19. Ethernet interface (LAN)
20. Power supply
21. Mains switch
22. RS-232C port
“COM” port is used for connecting to a central
control system for central controlling, as well as
for system diagnosis, updating and monitoring.
23. Video input
24. SDI input
25. Audio input
Used as mono or stereo audio inputs.
4
1.2 Installation
1.2.1 HDD Installation
Caution:
) When working with electrostatic sensitive
devices such as a hard disk or the recorder,
make sure you use a static-free workstation.
Any electrostatic energy coming in contact
with the hard disk or recorder main board
can damage it permanently.
HCS-8130M Series Recorder can installation of at most
four HDDs, one of them as main-HDD which includes a
conference data area and a recording storage area and
others as hypo-HDDs which only have a recording
storage area. HCS-8130M Serises Recorder is with a
1000G HDD (default as main-HDD) when leaving factory.
Based on the record schedule, you can calculate the
total capacity you need (refer to Appendix A) and add
other HDD. Please ask the specialist to disassembly the
recorder and install HDD.
Installing the harddisks must be performed by qualified
personnel. Unauthorized installation of harddisks may
result in permanent damage of the disk and the recorder,
and is performed at your own risk.
Procedure:
1. Before installation of the HDD, switch the recorder off
and unplug the power cable;
2. Place the recorder on a flat table, and make sure you
take proper ESD precautions. Wear an ESD bracelet
at all times. A Philips screwdriver is required to
disassemble and reassemble the unit;
3. Remove the metal top cover by removing screws;
4. Fix and fasten four attached posts to the bottom cover;
5. Place the metal harddisk bracket on top of the
harddisks, and fasten each harddisk with 4 screws to
the bracket;
Figure 1.4 Installation of the bracket onto the harddisk
6. Set the bracket to the fixed posts and fix the bracket
with 4 screws or 4 posts (if more HDD is needed);
7. Connect the power and data cables to the HDD and
main board;
Figure 1.5 Cable connection
8. Repeat above steps, up to 4 HDD can be installed
(two at the left and the other two at the right);
9. Check all connections, and reinstall the metal cover on
the recorder.
Figure 1.3 Installation of the posts
5
Note:
) please select suitable hard disk for mass
storage;
) When a recorder only installation of one
HDD, which will be the main-HDD and
can connect to any HDD data cable
interface.
) When a recorder installation of more
HDDs, the main-HDD must connect to the
Interface J31 which is the nearest one of
the battery.
) When the HDD is added from one to
more, the quondam HDD must connect to
the Interface J31 as the main-HDD.
) Please format hard disk after installation,
see section 2.5 for details.
) Do not change the connection of the
HDDs after working.
6
1.2.2 Fixed in cabinet
The recorder can be fixed in a standard 19-inch cabinet.
The recorder is equipped with a pair of fixing brackets
①. First unscrew the lateral screws ② from the housing.
Then fasten the brackets with these screws and put the
recorder in the cabinet. Finally fix the four holes ③ up
with screws.
Figure 1.6 Installation of the recorder
In addition, 1U metal stripes are included as decoration
to be installed between the CMUs in the cabinet. It is
also good for the ventilation and cooling off. Fix up the
four holes ③ with screws.
Figure 1.7 Decoration of cabinet
7
1.3 Connection
HCS-8130M Series Professional Audio & Video
Recorder for Conference can be connected to TAIDEN
conference system, synchronously records conference
video & audio information. By connecting to the
automatic video tracking system, the application
software is used to make camera presets for every
congress unit, automatically records speaking
delegate(s) and the panorama of the venue - saves
data as digital files.
Figure 1.8 System connection
8
Loading...