Taiden HCS-3316HDB Installation And Operating Manual
HCS-3316HDB Videoconference Camera
Excellent solutions for conferences
Installation and Operating Manual
V 1.1
Safeguard
1. Before installing the camera, please read this manual carefully,
please follow this manual during installation and operation, and
keep it manual for future use.
2. Before powering up the camera, please check the local power
supply; make sure it complies with the requirements of the camera
power adapter.
3. During installation, please settle the cables (power/video/control)
into the right position, not to be stressed by heavy load. Don’t place
other objects over the power connection; make sure that cable
connections are well-protected and well-contacted.
4. Please operate the camera within a temperature and a humidity
range as described in this manual (operating temperature/humidity:
0℃
to 50℃ (32℉ to 122℉) /0 to 95%). Avoid heavy pressure,
strenuous vibration and soaking during transportation, storage and
installation.
5. Don’t disassemble the camera by yourself, please turn to
professional and qualified personnel for help when necessary.
6. Hold the bottom of the camera when installing, do not touch very
easily damageable parts.
7. Video and control cables should be well-shielded to keep stable
signal transmission.
8. When cleaning the camera, please use soft cloth. If the camera is
very dirty, wipe it off gently with a soft cloth moistened with a weak
solution of water and a neutral kitchen detergent. Wring all excess
liquid from the cloth before wiping the camera. Next, wipe off all
remaining solution with a soft, dry cloth. Use lens cleaning paper to
clean the lens.
1
Contents
1. Overview ................................................................................................3
1.1 Introduction
1.2 Features ...........................................................................................4
1.3 Specifications
1.4 Structure ........................................................................................... 8
2. Camera Ins
2.1 Matters Needing Attention
2.2 Installation ...................................................................................... 11
3. Camera V
3.1 Switch Configuration
3.2 Format Configuration
4. Remote Control
5. Menu Function
5.1 Remote Control Menu
5.2 Menu Item.......................................................................................20
6. Presets Des
7. RS Control............................................................................................ 25
.......................................................................................3
...................................................................................6
tallation .............................................................................. 10
..............................................................10
ideo Out Mode .....................................................................12
......................................................................12
......................................................................14
....................................................................................16
.....................................................................................19
....................................................................19
cription ..............................................................................23
7.1 Switch Configuration
7.2 Menu Configuration
7.3 Control Cables
7.4 Control Mode
7.5 Connec
8. Dimensions...........................................................................................30
9. Product and Accessori
10. Troubleshooting
..................................................................................28
tion .....................................................................................29
..................................................................................33
......................................................................25
........................................................................26
................................................................................27
es...................................................................... 31
2
1. Overview
1.1 Introduction
This high-definition, all-in-one, Pan/Tilt/Zoom (PTZ) Video Camera
brings the HD scenes to your life. This unique camera is equipped with a
DVI-I interface designed to maximize high video quality displays and is
capable of displaying both digital and analog signals (output options are
Y/Pb/Pr, HDMI, DVI-D, VGA, RGBHV and HD-SDI, etc.). It utilizes a
direct drive motor mechanism for achieving high-speed, quiet and
smooth P/T/Z operations. The camera covers a wide shooting range,
with a pan angle of -150° to +150°, with a max pan speed of 300°/s, tilt
angle of -30° to +90°, with a max tilt speed of 125°/s.
This unique camera employs a 1/2.7-type HD CMOS image sensor with
five mega effective pixels and can be used in combination with any
number of codecs and other systems to produce high-quality,
high-resolution images. With its wide field of view, built-in 20x optical
zoom lens, 16:9 aspect ratio video and high-speed, quiet pan/tilt
operation, the camera can cover subjects across wider space with
minimal disturbance. Combining convenient features such as auto
focus/ auto exposure, 64-position presets, auto cruise, configurable
scan mode, remote control, and external control by standard
RS-485/232 interface, it is ideal for application including
videoconferencing, distance learning, corporate training, etc.
3
1.2 Features
Features Benefit
Superb Picture Quality 5 Mega
Pixels HD CMOS Sensor
Video Format Compatible with
Multiple Formats from
NTSC/PAL to Full HD
Quiet, High-Speed Pan/Tilt
Action
The camera incorporates a 1/2.7-type HD CMOS
sensor (a total of five mega effective pixels)
providing outstanding picture quality and high
resolution images.
The camera allows for HD 720p to 1080p60
migration. It enables you to shoot an image
using the 1080p full high definition video format
and output in one of video formats (e.g. 720p,
1080p, 1080i and HD-analog and HD-digital).
By adopting the direct drive motor mechanism
similar to the drive motor found in the camera,
the camera is extremely quiet and moves
smoothly and quickly to the designated
positions.
DVI-I Interface
High-Quality Image
Transmission via the Digital
Interface (HD-SDI)
Built-in Conversion Lens for
Wide Angle View
The camera is equipped with a DVI-I interface
designed to maximize high video quality displays
and is capable of displaying both digital and
analog signals (output is selectable from
Y/Pb/Pr, HDMI, DVI-D, VGA, and RGBHV).
This new camera outputs an HD image that
conforms to the SMPTE 292M serial digital
interface standard which allows a long distance
transmission of high-quality images.
The camera incorporates a newly developed
wide-angle lens for wide field of view image
capture.
4
Features Benefit
RS-485/422 and RS-232 Serial
Control by PELCO-D/VISCA
Protocol
240x Zoom Ratio(20x Optical +
12x Digital)
All camera settings and pan/tilt/zoom functions
for the camera can be controlled remotely via
PC.
The fast and stable auto-focus zoom lens on the
camera has an impressive 240x zoom ratio.
5
1.3 Specifications
Items Specifications
Image Sensor 1/2.7-type HD CMOS sensor, 5 mega pixels
HD: 1080p60/1080p50/1080p30/1080p25/1080i60/
Signal System
Lens
Zoom ratio 20x optical zoom, 12x digital zoom
Minimum object distance 0.5m (wide) - 1.5m (tele)
Horizontal viewing angel 58.7° (wide) - 3.2° (tele)
Focus Auto / Manual / One-push
Minimum Illumination 0.5Lx (50IRE, F1.6)
Exposure
Shutter speed
Gain Auto / Manual
White balance
Video effect Backlight compestaion, vertical flip
OSD Menu English / Simplified chinese / Traditional chinese
S/N ratio
Synchronization Internal
Backlight Compensation On / Off
Pan/Tilt Speed
Pan/Tilt range
Preset 64
Video Output
1080i50/720p60/720p50/720p30/720p25;
SD: NTSC, PAL
20x optical zoom lens,
f=4.7-94mm, Fw/1.6-Ft/3.5
Auto / Manual / Shutter prioirty /
Iris priority / Exposure control
1/60 to 1/10,000s (60 Hz)
1/50 to 1/10,000s (50 Hz)
Manual / Outdoor / Indoor1 / Indoor2 / Indoor3 /
Indoor4 / Auto / One-push
＞50dB
Pan: 0.1°～200°/sec, Tilt: 0.1°～150°/sec
Pan: ±150°, Tilt: -30°～90°
HD: HD-SDI, DVI-I (is selectable from Y/Pb/Pr,
HDMI, DVI-D, VGA, RGBHV)
SD: CVBS
6
Items Specifications
Multiple video output 3-ways HD and 1-way SD
Control Protocol PELCO-D, VISCA
Control Interface RS-485/422, RS-232
Baud Rate 2400/4800/9600/19200/38400 bps
Address
Temperature
Relative Humidity
Power Requirements DC 12 V
Power Consumption <10 W
Dimensions (mm) 144(H)×259(W)×166(D)
0～255
Operating temperature: 0℃～+50℃
Storage temperature: -20℃～+70℃
0～95% (not condensing)
7
1.4 Structure
Note: for HD-SDI interface (HD), the maximum transmission distance is 100 meters.
Pin assignment of RS-232
8
Pin assignment of RS-485/422
No Pin
1 RXD- White
2 TXD-
3 RXD+ Green
4 TXD+
Corresponding pin
of RS-485 cable
Black
Red
Corresponding pin of
RS-422 cable
Red
Black
9
2. Camera Installation
2.1 Matters Needing Attention
1. All of the installation work should be serviced by qualified technical
personnel or system installers.
2. Handle with care when unpacking and removing the camera; do not
impact the camera and other parts of the camera with hard objects to
avoid preventable problems.
3. Do not handle the camera head when holding the camera; do not
randomly rotate the camera head.
4. Hold the bottom of the camera when installing, do not touch very
easily damageable parts.
5. Camera installation location should be as far as possible from high
voltage, and protective measures should be done if necessary.
6. If the control system cannot setup the address of the camera, the
address of the camera must be setup with code switch before
installation.
7. Please carefully hold the camera and be sure to follow the steps and
methods of operation described in this specification.
8. The total weight of this product is no more than 1.5 kg. For safety, all
mechanical connections and connecting devices for supporting this
product must be able to withstand more than 5 times loads of the
total weight.
10
2.2 Installation
There are two installation methods of the camera: a) tabletop installation
and b) ceiling installation.
a) Tabletop installation
b) Ceiling installation
11
Loading...