Tagsys MEDIOS004EVAL User Manual

Medio S004 EVM

User's Guide

Revision 1.1

October 2006

Medio S004 EVM

Publishing Information

Disclaimer and Limitation of Liability

All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and
keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such
information.

Nothing herein shall be construed as implying or granting to you any rights, by license, grant or otherwise, under any
intellectual and/or industrial property rights of or concerning any of TAGSYS’ information.

This document can be used for informational, non-commercial, internal and personal use only provided that:

 the copyright notice below, the confidentiality and proprietary legend and this full warning notice appear in all copies.

 this document shall not be posted on any network computer or broadcast in any media and no modification of any

part of this document shall be made.

Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities.

The information contained in this document is provided “AS IS” without any warranty of any kind. Unless otherwise
expressly agreed in writing, TAGSYS makes no warranty as to the value or accuracy of information contained herein.
The document could include technical inaccuracies or typographical errors. Changes are periodically added to the
information herein. Furthermore, TAGSYS reserves the right to make any change or improvement in the specifications
data, information, and the like described herein, at any time.

Therefore TAGSYS assumes no liability and is not responsible for customer applications or product or software which
include TAGSYS products.

TAGSYS HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE INFORMATION
CONTAINED HEREIN, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL TAGSYS BE LIABLE, WHETHER
IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE,
DATA, PROFITS, REVENUES, OR CUSTOMERS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF INFORMATION CONTAINED IN THIS DOCUMENT.

TAGSYS does not and shall not warrant that this product/system/equipment will be resistant to all possible attacks, and
shall not incur, and disclaims, any liability in this respect. Even if each product is compliant with current security
standards in force on the date of their design, security mechanisms' resistance necessarily evolves according to the
state-of-the-art in security and notably under the emergence of new attacks. Under no circumstances shall TAGSYS be
held liable for any third party actions, and in particular in case of any successful attack against systems or equipment
incorporating TAGSYS products.

TAGSYS disclaims any liability with respect to security for direct, indirect, incidental or consequential damages that result
from any use of its products. It is further stressed that independent testing and verification by the person using the
product is particularly encouraged, especially in any application in which defective, incorrect, or insecure functioning
could result in damage to persons or property, denial of service, or loss of privacy.

Pictures in this document are not representative of the final product. In particular, connectors’ availability is
subject to local radio regulations. All the pictures are related to European product.

© 2000-2006 TAGSYS. All rights reserved.

Microsoft, Visual C++, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft
Corporation in the U.S.A. and/or other countries.

I-Code is a registered trademark of Philips.

Tag-It is a registered trademark of Texas Instruments.

Printed in France.

TAGSYS – 180 Chemin de St Lambert, 13821 LA PENNE SUR HUVEAUNE, France.

Tel: [phone] / Fax: [phone]

Document Reference: 12125A1

2/33 Revision 1.1 October 2006

Medio S004 EVM

Read This First

Welcome to the TAGSYS range of products operating at the 13.56 MHz frequency. This range of
products is used to implement high-quality RFID systems for demanding applications.

This document provides information about how to install and use the Medio S004 EVM (Evaluation
Module).

Audience

This document requires familiarity with RFID technology. It is intended for people in charge of
installing and using the product.

Conventions

Symbol Meaning

CAUTION: A note that advises users that a specific action could result in the loss of data or

damage the hardware.

WARNING: A note that advises users that a specific action may result in physical harm.

A note that provides additional information that helps the user perform a task or obtain the
best performance from the product.

If you need assistance

Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at:

Telephone: [phone]

Fax: [phone]

E-Mail:

Website: http://www.tagsysrfid.com

[e-mail]

Contact for Comments

We welcome your feedback to help us provide high quality documentation.

For technical comments, please contact our welcome desk:

Telephone: [phone]
Fax: [phone]
E-Mail:

Please remember to quote the Document Reference Number 12125A1, your job title and your
company.

October 2006 Revision 1.1 3/33

[e-mail]

Medio S004 EVM

Quality Issues

TAGSYS implements stringent quality controls at all stages of its manufacturing process. However,
should you find a defect with this product, please notify your TAGSYS Quality Service
representative using the dedicated Product Return Form.

Telephone: [phone]
Fax: [phone]

4/33 Revision 1.1 October 2006

Medio S004 EVM

Table of Contents

PUBLISHING INFORMATION __________________________________________________________ 2

DISCLAIMER AND LIMITATION OF LIABILITY__________________________________________________ 2

READ THIS FIRST ____________________________________________________________________ 3

AUDIENCE ____________________________________________________________________________ 3
CONVENTIONS _________________________________________________________________________ 3
IF YOU NEED ASSISTANCE________________________________________________________________ 3
CONTACT FOR COMMENTS _______________________________________________________________3
QUALITY ISSUES _______________________________________________________________________ 4

1 FOR YOUR SAFETY _______________________________________________________________ 7

1.1 GENERAL USE ____________________________________________________________________ 7

1.2 CARE AN D MAINTENANCE ___________________________________________________________ 7

1.3 IMPORTANT SAFETY INFORMATION____________________________________________________ 8

1.3.1 OPERATING ENVIRONMENT ________________________________________________________ 8

2 CERTIFICATION___________________________________________________________________ 9

2.1 OCCUPATIONAL HEALTH____________________________________________________________ 9

2.2 REGULATORY NOTICES _____________________________________________________________ 9

2.2.1 IN EUROPE (CE AND RTTE DIRECTIVES) _____________________________________________ 9

2.2.2 IN USA (FCC DIRECTIVE)_________________________________________________________ 10

2.2.3 IN CANADA _____________________________________________________________________ 10

2.3 ROHS AND WEEE DIRECTIVES _____________________________________________________ 11

2.3.1 ROHS (RESTRICTION OF THE USES OF CERTAIN HAZARDOUS SUBSTANCES) _______________ 11

2.3.2 WEEE (WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT) ____________________________ 11

3 INTRODUCTION__________________________________________________________________ 12

3.1 EVM DESCRIPTION _______________________________________________________________ 12

3.2 MEDIO S004 READER DESCRIPTION _________________________________________________ 12

3.3 MEDIO S004 EVM DELIVERY _______________________________________________________ 13

3.4 MEDIO S004 EVM KEY FEATURES___________________________________________________ 13

4 GETTING STARTED WITH THE EVM _______________________________________________ 16

4.1 INSTALLING THE EVM PRODUCT_____________________________________________________ 16

4.2 INSTALLING EVM DRIVERS _________________________________________________________ 16

4.2.1 WINDOW 98

®

USB DRIVERS INSTALLATION __________________________________________ 17

4.2.2 WINDOWS XP USB DRIVERS INSTALLATION __________________________________________ 17

5 TECHNICAL INFORMATION ON THE EVM __________________________________________ 19

5.1 MONITORING MEDIO S004 EVM DIGITAL SIGNALS______________________________________ 19

October 2006 Revision 1.1 5/33

Medio S004 EVM

5.2 A-VSA ANTENNA DESCRIPTION _____________________________________________________ 20

5.3 PLUGGING ANOTHER ANTENNA TO THE SMA CONNECTOR _______________________________ 21

6 S004 EXPLORER_________________________________________________________________ 22

6.1 INSTALLING S004 EXPLORER _______________________________________________________ 22

6.2 RUNNING S004 EXPLORER _________________________________________________________ 24

6.2.1 USB COMMUNICATION ___________________________________________________________ 24

6.3 READING AND WRITING A TAG ______________________________________________________ 25

7 STAND-ALONE MODE ____________________________________________________________ 26

7.1 STAND-ALONE MODE FEATURES ____________________________________________________ 26

7.1.1 CUSTOMIZED ASCII MESSAGE FORMAT _____________________________________________ 27

7.1.2 REPETITION OPTION _____________________________________________________________ 27

7.1.3 TRIGGER INPUT _________________________________________________________________ 28

7.1.4 OUTPUT SETTINGS ______________________________________________________________ 28

7.2 STAND-ALONE MODE SETTINGS_____________________________________________________ 29

7.2.1 USING S004 EXPLORER __________________________________________________________ 29

7.3 DISABLING STAND-ALONE MODE ____________________________________________________30

8 WARRANTY CONDITIONS ________________________________________________________ 31

8.1 WARRANTY ______________________________________________________________________ 31

8.2 WARRANTY EXCLUSIONS __________________________________________________________ 31

8.2.1 GENERAL PROVISIONS ___________________________________________________________ 32

8.2.2 HOW TO RETURN DEFECTIVE PRODUCTS ____________________________________________ 32

6/33 Revision 1.1 October 2006

Medio S004 EVM

1 For Y our Safety

1.1 General Use

The Medio S004 reader and EVM are designed to be reliable and to provide years of trouble-free
service.
Please observe the following general tips:

 Take care not to damage the components. When working with the device, use only

equipment that meet TAGSYS specifications.

 This device is not waterproof and should not be exposed to moisture.

 Protect the device from extreme temperatures. For example, do not place the device in a

windowed area where the sun may cause extreme temperatures, and keep it away from
heaters and other heat sources.

 Do not store or use the device in any location that is extremely dusty, damp, or wet.

1.2 Care and Maintenance

This device is a product of superior design and should be handled with care. The suggestions
below will further increase the lifetime of this device.

 Keep the device and all parts and accessories out of the reach of small children.

 Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode

electronic circuits.

 Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.

 Do not store in hot areas. High temperatures can shorten the life of electronic devices,

damage batteries and warp or melt certain plastics.

 Do not store in cold areas. When the device warms up (to its normal temperature), moisture

can form which may damage electronic circuit boards.

 Do not attempt to modify the device. Non-professional handling of the device may damage

it.

 Handle the device with care. Shocks may break internal circuit boards.

 If the device or any accessory are not working properly, take it to your nearest qualified

TAGSYS representative.

October 2006 Revision 1.1 7/33

Medio S004 EVM

1.3 Important Safety Information

1.3.1 Operating Environment

When connecting the device or any accessory to another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible products.

8/33 Revision 1.1 October 2006

Medio S004 EVM

2 Certification

2.1 Occupational Health

TAGSYS EVM has been designed and tested to be in conformity with the European Standard EN
50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic
Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in
conjunction with the European Standard EN 50357 describing how to evaluate the exposure level.
The EVM has been also designed to be in conformity with Specific Absorption Rate (SAR)
standards according to FCC CFR47 and EN 50392:2004 recommendations.

Modification of any part of TAGSYS System is prohibited without the written consent of
TAGSYS. Unauthorized modifications may void the certificate of conformity of the equipment
and will also void the TAGSYS certificate of warranty.

2.2 Regulatory Notices

An RFID system typically composed of an RF emission device connected to an antenna such as
the Medio S004 EVM comprising the Medio S004 reader and the EVM with its embedded antenna.
Every RFID system is subject to national regulations that may differ by country.

The EVM is meant to be used solely for evaluation purposes. It is the responsibility of the system
integrator to ensure that the final solution meets all regulatory requirements.

The Medio S004 EVM product is primary intended for evaluation usage and as such is not
supposed to be integrated. Nevertheless it is the responsibility of the CIT (Certified

Integrators by TAGSYS) to integrate the Medio S004 EVM as described in this Integrator’s
Guide.

If the Medio S004 EVM is integrated in custom solution, it is the sole responsibility of the
manufacturer to obtain the required approvals for the customized product.

2.2.1 In Europe (CE and RTTE Directives)

The Medio S004 EVM complies (CE Declaration of Conformity granted) with the European EMC
directive.

The Medio S004 EVM complies with the requirements of the Telecommunication Terminal
Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.

October 2006 Revision 1.1 9/33

Medio S004 EVM

2.2.2 In USA (FCC Directive)

Medio S004 EVM

WARNING TO USERS IN THE UNITED STATES

FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO

INTERFERENCE STATEMENT 47 CFR Section 15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

▪ Reorient or relocate the receiving antenna.

▪ Increase the separation between the equipment and receiver.

▪ Connect the equipment into an outlet on a circuit different to that to which the receiver is

connected.

▪ Consult the dealer or an experienced radio/TV technician for help.

NO UNAUTHORIZED MODIFICATIONS

47 CFR Section 15.21

CAUTION: This equipment may not be modified, altered, or changed in any way without signed

written permission from TAGSYS SA. Unauthorized modification may void the equipment
authorization from the FCC and will void the TAGSYS warranty.

ANTENNA REQUIREMENT

47 CFR Section 15.203

CAUTION: This equipment must be professionally installed. The installer shall be responsible for

ensuring that only the supplied antenna is employed so that the limits in this part are not exceeded.
Non-professional installation or installation of the equipment with an improper antenna may void
the equipment authorization from the FCC and will void the TAGSYS warranty.

The Medio S004 EVM has been designed to comply with FCC 47 CFR Part 15 Rules.

Operation is subject to the following two conditions: (1) The system devices may not cause harmful
interference, and (2) The library system devices must accept any interference received, including
interference that may cause undesired operation.

2.2.3 In Canada

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations

10/33 Revision 1.1 October 2006