Tagsys MEDIOL40 User Manual

Medio L40

User's Guide

Revision 2.3

July 2013

Medio L40 - User's Guide

Publishing Information

Disclaimer and Limitation of Liability

All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and
keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such
information.

Nothing herein shall be construed as implying or granting to you any rights, by license, grant or otherwise, under any
intellectual and/or industrial property rights of or concerning any of TAGSYS’ information.

This document can be used for informational, non-commercial, internal and personal use only provided that:
 The copyright notice below, the confidentiality and proprietary legend and this full warning notice appear in all

copies.

 This document shall not be posted on any network computer or broadcast in any media and no modification of any

part of this document shall be made.
Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities.
The information contained in this document is provided “AS IS” without any warranty of any kind. Unless otherwise

expressly agreed in writing, TAGSYS makes no warranty as to the value or accuracy of information contained herein.
The document could include technical inaccuracies or typographical errors. Changes are periodically added to the
information herein. Furthermore, TAGSYS reserves the right to make any change or improvement in the specifications
data, information, and the like described herein, at any time.

Therefore TAGSYS assumes no liability and is not responsible for customer applications or product or software which
includes TAGSYS products.

TAGSYS HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE INFORMATION
CONTAINED HEREIN, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL TAGSYS BE LIABLE, WHETHER
IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE,
DATA, PROFITS, REVENUES, OR CUSTOMERS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF INFORMATION CONTAINED IN THIS DOCUMENT.

TAGSYS does not and shall not warrant that this product/system/equipment will be resistant to all possible attacks, and
shall not incur, and disclaims, any liability in this respect. Even if each product is compliant with current security
standards in force on the date of their design, security mechanisms' resistance necessarily evolves according to the
state-of-the-art in security and notably under the emergence of new attacks. Under no circumstances shall TAGSYS be
held liable for any third party actions, and in particular in case of any successful attack against systems or equipment
incorporating TAGSYS products.

TAGSYS disclaims any liability with respect to security for direct, indirect, incidental or consequential damages that result
from any use of its products. It is further stressed that independent testing and verification by the person using the
product is particularly encouraged, especially in any application in which defective, incorrect, or insecure functioning
could result in damage to persons or property, denial of service, or loss of privacy.

© 2000-2011 TAGSYS. All rights reserved.
Microsoft, Visual C++, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft

Corporation in the U.S.A. and/or other countries.
I-Code is a registered trademark of Philips.
TAGSYS, MEDIO, E-connectware are registered trademarks of TAGSYS

Printed in France.
TAGSYS – 785 Voie Antiope, Athélia III, 13600 La Ciotat, France.
Tel: [phone] / Fax: [phone]
Document Reference: DOC14467B3.

July 2013 2.3 2/56

Medio L40 - User's Guide

Read This First

Welcome to the TAGSYS range of products operating at the 13.56 MHz frequency. This range of
products is used to implement high-quality RFID systems for demanding applications.

This document provides information about how to install and use the Medio L40 reader.

Audience

This document requires familiarity with RFID technology. It is intended for people in charge of
installing and using the product.

Conventions

Symbol Meaning

CAUTION: A note that advises users that a specific action could result in the loss of data or

damage the hardware.
WARNING: A note that advises users that a specific action may result in physical harm.

A note that provides additional information that helps the user performs a task or obtains the
best performance from the product.

If you need assistance

Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at:

Telephone: [phone]
Fax: [phone]
E-Mail: [e-mail]
Website: http://www.tagsysrfid.com

Contact for Comments

We welcome your feedback to help us provide high quality documentation.
For technical comments, please contact our welcome desk:

Telephone: [phone]
Fax: [phone]
E-Mail: [e-mail]

Please remember to quote the Document Reference Number DOC14467B3, your job title and your
company.

July 2013 2.3 3/56

Medio L40 - User's Guide

Quality Issues

TAGSYS implements stringent quality controls at all stages of its manufacturing process. However,
should you find a defect with this product, please notify your TAGSYS Quality Service
representative using the dedicated Product Return Form.

Telephone: [phone]
Fax: [phone]

E-Mail: [e-mail]

4/56 Revision 2.3 July 2013

Medio L40 - User's Guide

Table of Contents

PUBLISHING INFORMATION __________________________________________________________ 2

D

ISCLAIMER AND LIMITATION OF LIABILITY

READ THIS FIRST ____________________________________________________________________ 3

A

UDIENCE

C

ONVENTIONS

I

F YOU NEED ASSISTANCE

C

ONTACT FOR COMMENTS

Q

UALITY ISSUES

_____________________________________________________________________________ 3

_________________________________________________________________________ 3

________________________________________________________________ 3

_______________________________________________________________ 3

_______________________________________________________________________ 4

1 FOR YOUR SAFETY _______________________________________________________________ 8

___________________________________________________ 2

1.1 G

1.2 C

1.3 I

1.3.1 O

ENERAL USE

ARE AND MAINTENANCE

MPORTANT SAFETY INFORMATION

PERATING ENVIRONMENT

_____________________________________________________________________ 8

___________________________________________________________ 8

________________________________________________________ 9

____________________________________________________ 9

2 CERTIFICATION __________________________________________________________________ 10

2.1 O

2.2 R

2.2.1 IN E

2.2.2 FCC ID C

2.2.3 IN USA (FCC D

2.2.4 IN C

2.3 ROHS

2.3.1 ROHS (R

2.3.2 WEEE (W

CCUPATIONAL HEALTH AND SAFETY NOTICES

EGULATORY NOTICES

UROPE

ANADA

AND

(CE

ROSS REFERENCE TABLE

_____________________________________________________________________ 15

WEEE D

ESTRICTION OF THE USES OF CERTAIN HAZARDOUS SUBSTANCES

ASTE ELECTRICAL AND ELECTRONIC EQUIPMENT

____________________________________________________________ 10

AND

RTTE D

IRECTIVES

) ____________________________________________ 10

________________________________________________ 10

IRECTIVE

) _________________________________________________________ 14

IRECTIVES

______________________________________________________ 15

_________________________________________ 10

) _______________ 15

) ____________________________ 16

3 OVERVIEW_______________________________________________________________________ 17

3.1 K

3.2 D

3.3 P

3.3.1 F

3.3.2 R

EY FEATURES
ELIVERY
HYSICAL DESCRIPTION

RONT PANEL

EAR PANEL

___________________________________________________________________ 18

_______________________________________________________________________ 19

__________________________________________________________________ 19

___________________________________________________________________ 20

____________________________________________________________ 19

4 INSTALLATION ___________________________________________________________________ 21

4.1 M

4.2 C

4.3 U

4.3.1 I

4.3.2 U

4.4 U

4.5 U

4.6 R

July 2013 2.3 5/56

ECHANICAL ASPECTS
ABLING REQUIREMENTS
SING

USB I

NTERFACE

NSTALLING

SING THE

SING

RS-232 I

SING

10/100 E

ESTORING FACTORY CONFIGURATION

USB D

USB

NTERFACE

THERNET INTERFACE

____________________________________________________________ 21

___________________________________________________________ 21

____________________________________________________________ 22

RIVERS

INTERFACE

________________________________________________________ 22

_______________________________________________________ 22

_________________________________________________________ 23

_________________________________________________ 23

_______________________________________________ 24

Medio L40 - User's Guide

4.7 R

4.7.1 I

4.7.2 C

4.7.3 R

4.7.4 R

4.7.5 U

UNNING

NSTALLING TAGSYS EXPLORER

TAGSYS E

XPLORER FOR THE FIRST TIME

____________________________________ 24

____________________________________________________ 24

ONNECTING TO A DEVICE USING TAGSYS EXPLORER WIZARD
EADING THE
EADING AND WRITING
PGRADING SYSTEM OR RADIO FIRMWARE

UID

OF

ISO 15693

ISO 15693

TAGS

_____________________________________________ 31

TAG MEMORY

_____________________________________ 32

__________________________________________ 33

__________________________ 26

5 ADVANCED NOTIONS ____________________________________________________________ 36

5.1 R

5.2 R

EADER ARCHITECTURE
EADER TO HOST PROTOCOLS

___________________________________________________________ 36

______________________________________________________ 37

5.2.1 TAGSYS STXNG _______________________________________________________________ 37

5.2.2 H

5.2.3 T

5.2.4 S

5.2.5 S

5.3 R

5.3.1 N

5.3.2 N

EARTBEAT
ELNET
ERIAL CONSOLE
TANDALONE MODE

EADER OPERATION PRINCIPLES

OTION OF READ MODES

OTION OF EVENTS

____________________________________________________________________ 37

________________________________________________________________________ 38

________________________________________________________________ 38

_____________________________________________________________ 39

_________________________________________________________ 40

______________________________________________________________ 40

_____________________________________________________ 39

6 TECHNICAL SPECIFICATIONS ____________________________________________________ 42

6.1 T

6.2 RS232 I

6.3 GPIO C

6.3.1 P

6.3.2 E

6.3.3 U

6.3.4 U

ECHNICAL DATA

NTERFACE

ONNECTOR
IN ASSIGNMENT
LECTRICAL CHARACTERISTICS

SING INPUTS
SING OUTPUTS

_________________________________________________________________ 42

________________________________________________________________ 43

________________________________________________________________ 44
________________________________________________________________ 44

__________________________________________________________________ 44

________________________________________________________________ 46

____________________________________________________ 44

7 ELECTRICAL CHARACTERISTICS _________________________________________________ 47

7.1 A

7.2 P

7.3 RS232 C

7.4 USB C

7.5 A

7.6 I

BSOLUTE MAXIMUM RATINGS
OWER SUPPLY DC CHARACTERISTICS AND START-UP

OMMUNICATION PORT CHARACTERISTICS

OMMUNICATION PORT CHARACTERISTICS

NTENNA ELECTRICAL CHARACTERISTICS

NPUT / OUTPUT ELECTRICAL CHARACTERISTICS

______________________________________________________ 47

_____________________________________ 49

_______________________________________ 50

_____________________________________________ 50

_______________________________________ 51

__________________________________ 48

8 MECHANICAL CHARACTERISTICS ________________________________________________ 52

8.1 D

8.2 F

IMENSIONS AND GENERAL MECHANICAL INFORMATION

IXING THE PRODUCT

______________________________________________________________ 52

_________________________________ 52

9 WARRANTY CONDITIONS _________________________________________________________ 53

9.1 W

9.2 W

9.2.1 G

9.2.2 H

ARRANTY
ARRANTY EXCLUSIONS

ENERAL PROVISIONS
OW TO RETURN DEFECTIVE PRODUCTS

______________________________________________________________________ 53

___________________________________________________________ 53

___________________________________________________________ 54

____________________________________________ 54

10 MEDIO L40 PRODUCT END OF LIFE MANAGEMENT _______________________________ 56

6/56 Revision 2.3 July 2013

Medio L40 - User's Guide

July 2013 2.3 7/56

Medio L40 - User's Guide

1 For Your Safety

1.1 General Use

The Medio L40 reader is designed to be reliable and to provide continuous, trouble-free service.
Please observe the following general tips:

 Take care not to scratch the device. Keep the device clean. When working with the device,

use only TAGSYS-approved accessories.

 This device is not waterproof and should not be exposed to rain or moisture. Under extreme

conditions, water may enter the circuitry.

 Protect the device from extreme temperatures. For example, do not place the device in a

windowed area where the sun may cause extreme temperatures, and keep it away from
heaters and other heat sources.

 Do not store or use the device in any location that is extremely dusty, damp, or wet.
 Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled,

clean it with a soft cloth moistened with a diluted window-cleaning solution.

 MEDIO L40 shall be supplied by LPS (limited power source) power supply in accordance to

clause 2.5 of UL/IEC 60950-1 Edition 2 with following ratings 24Vdc, 1.6A min suitable for a
minimum 40°C (104°F). Only use the recommended Powe r Supply Unit A2-50S18R-V
manufactured by VP ELECTRONIQUE or VEH40US24 manufactured by XP Power.

1.2 Care and Maintenance

This device should be handled with care. The suggestions below will increase the lifetime of this
device.

• Keep the device and all parts and accessories out of the reach of small children.

• Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode

electronic circuits.

• Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.

• Do not store in hot areas. High temperatures can shorten the life of electronic devices,

damage batteries and warp or melt certain plastics.

• Do not store in cold areas. When the device warms up (to its normal temperature), moisture
can form inside the device, which may damage electronic circuit boards.

• Do not attempt to open the device. Non-professional handling of the device may damage it
and will void the TAGSYS warranty.

• Handle the device with care. Shock and vibration may break internal circuit boards.

• Do not clean the device with harsh chemicals, cleaning solvents or strong detergents.

Gently wipe the device with a soft cloth slightly dampened in a mild soap-and-water
solution.

• Do not paint the device. Paint may clog the device’s moving parts and prevent proper
operation. Paint with metallic contents may limit device performances.

• If the device or any accessory are not working properly, take it to your nearest qualified
TAGSYS representative.

8/56 Revision 2.3 July 2013

Medio L40 - User's Guide

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions. Please see section

and Electronic Equipment)

for more details.

2.3.2 WEEE (Waste Electrical

1.3 Important Safety Information

1.3.1 Operating Environment

When connecting the device or any accessory to another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible products.

As with all RF equipment, users are advised that the equipment should only be used in its normal
operating mode described in this document.

July 2013 2.3 9/56

Medio L40 - User's Guide

2 Certification

2.1 Occupational Health and Safety Notices

TAGSYS Products have been designed not to exceed the limits given in the European Standard
EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic
Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in
conjunction with the European Standard EN 50357 describing how to evaluate the exposure level.

It is the responsibility of the TAGSYS Partner to install the Medio L40 as described in TAGSYS
Documentation and with the appropriate antennas.

Modification of any TAGSYS System is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to safety standards and will
void the TAGSYS warranty.

An RF fields survey has been carried out on all the TAGSYS System components, in accordance
with AS/NZS 2771.1: Radio Frequency Radiation, Part 1. According to this standard the maximum
allowable RF exposure levels (non-occupational) at 3 kHz to 300 GHz are 200 µW/cm2.

2.2 Regulatory Notices

An RFID system typically composed of an RF emission device such as the Medio L40 is subject to
national regulations that may differ by country.

One important item to consider is the maximum permissible magnetic field intensity at a distance of
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US.

The Medio L40 meets these limits.

It is the responsibility of the TAGSYS Partner to install the Medio L40 as described in this
User’s Guide or in TAGSYS Documentation.

2.2.1 In Europe (CE and RTTE Directives)

The Medio L40 complies (CE Declaration of Conformity granted) with the European EMC directive.
The Medio L40 complies with the requirements of the Telecommunication Terminal Equipment Act

(FTEG) and the RTTE Directive 1995/5/EC.
It is the responsibility of the TAGSYS Reseller to install the Medio L40 as described in this

Reference guide or TAGSYS Documentation.
Any modification of the Medio L40 is prohibited without the written consent of TAGSYS.

Unauthorized modifications may void the conformity of the equipment to CE and RTTE Directives
and will void the TAGSYS warranty.

If a Medio L40 is further integrated in a different product, it is the responsibility of the
manufacturer of this complementary product to obtain the required approvals for this product.

2.2.2 FCC ID Cross Reference Table

It is the responsibility of the TAGSYS Partner to install the Medio L40 as described in the table
below, taking care of only installing the right antenna configuration with the right power settings.

10/56 Revision 2.3 July 2013

Medio L40 - User's Guide

Table 1: Medio L40 FCC ID Cross reference Table

Antenna

Aero LB
Antenna

Aero LC
Antenna

L-SA3

Antenna

L-SA4

Antenna

MAT

Antenna

Outside
Dimension

250X250

400X500

250X330

220X220

130X480

Channel
Setting

Single
Channel

Single
Channel

Single
Channel

Single
Channel

Single
Channel

Multiplexer

Single RF

Port

Single RF

Port

Single RF

Port

Single RF

Port

Single RF

Port

Max.
Output
Power

5W

5W

1.5W

1W

5W

Power Supply FCC ID

A2-50S18R-V

VEH40US24

QHKMEDIOL40

A2-50S18R-V

VEH40US24

A2-50S18R-V

VEH40US24

A2-50S18R-V

VEH40US24

A2-50S18R-V

VEH40US24

QHKMEDIOL40

QHKMEDIOL40

QHKMEDIOL40

QHKMEDIOL40

Laundry

Stack

Antenna

Antenna

Aero LB

Antenna

Aero LC
Antenna

640x430

Single
Channel

2W

Single RF

Port

A2-50S18R-V

VEH40US24

QHKMEDIOL40

To comply with band edge regulation, when used in vertical upright position the Aero LB and
Aero LC antennas can read tags in the following RFID uplink protocols configurations

Table 2: Medio L40 FCC ID Cross reference Table

Outside
Dimension

250x250

Channel
Setting

Quad­Channel

Multiplexer

Active

Max.
Output
Power

5W

Power Supply FCC ID

A2-50S18R-V

VEH40US24

QHKMEDIOL40

5W

A2-50S18R-V

VEH40US24

QHKMEDIOL40

400X500

Quad­Channel

Active

5W

A2-50S18R-V

VEH40US24

QHKMEDIOL40

MAT

Antenna

July 2013 2.3 11/56

130x480

Quad­Channel

Active

Medio L40 - User's Guide

TR-CAU
Antenna

Tunnel
antenna

998x418

500X500

Two­Channel

Quad­Channel

3.5W

Active

2W

Active

A2-50S18R-V

VEH40US24

A2-50S18R-V

VEH40US24
TBL 060-124

ABL 7RM24025

QHKMEDIOL40

QHKMEDIOL40

To comply with band edge regulation, when used in vertical upright position the Aero LB
antenna can read tags in the following RFID uplink protocols configurations

To comply with band edge regulation, when reading ISO15693 tags TR-CAU antenna can
read tags in the following RFID uplink protocols configurations

In I-Code 1 (C270) parameters window set the uplink parameters as follow:
Bit Coding: “Standard” (1 out of 256 pulse)

12/56 Revision 2.3 July 2013

Medio L40 - User's Guide

In ISO15693 Parameters window set the uplink parameters as follow:
Command modulation depth: 10% (ASK)
EOF modulation depth: 10% (ASK)
Data coding mode: 1 of 256

July 2013 2.3 13/56

Medio L40 - User's Guide

2.2.3 In USA (FCC Directive)

The Medio L40 has been designed to comply with Part 15 of the FCC Rules. Furthermore typical
configurations listed section 2.2.2 FCC ID Cross Reference Table have been successfully tested
with Part 15 of the FCC rules (FCC ID Numbers are listed on all system-mounted TAGSYS
Antennas).

Medio L40

WARNING TO USERS IN THE UNITED STATES

FEDERAL COMMUNCIATIONS COMMISSION (FCC) RADIO

INTERFERENCE STATEMENT 47 CFR Section 15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:

▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different to that to which the receiver is

connected.

▪ Consult the dealer or an experienced radio/TV technician for help.

NO UNAUTHORIZED MODIFICATIONS

47 CFR Section 15.21

CAUTION: This equipment may not be modified, altered, or changed in any way without signed
written permission from TAGSYS SA. Unauthorized modification may void the equipment
authorization from the FCC and will void the TAGSYS warranty.

ANTENNA REQUIREMENT

47 CFR Section 15.203

CAUTION: This equipment must be professionally installed. The installer shall be responsible for
ensuring that the proper antenna is employed so that the limits in this part are not exceeded. Non­professional installation or installation of the equipment with an improper antenna may void the
equipment authorization from the FCC and will void the TAGSYS warranty.

Operation is subject to the following two conditions: (1) The system devices may not cause harmful
interference, and (2) The system devices must accept any interference received, including
interference that may cause undesired operation.

14/56 Revision 2.3 July 2013

Medio L40 - User's Guide

2.2.4 In Canada

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.

Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour
l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à
l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire à l'établissement d'une communication satisfaisante.

This radio transmitter (IC: 7562A-MEDIOL40) has been approved by Industry Canada to

operate with the antenna types listed below with the maximum permissible gain and required
antenna impedance for each antenna type indicated. Antenna types not included in this list, having
a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this
device.

Le présent émetteur radio (IC: 7562A-MEDIOL40) a été approuvé par Industrie Canada

pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans
cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.

The Medio L40 device has been designed to operate with the antennas listed below, and

having a maximum gain of -25 dBi. Antenna not included in this list or having a gain greater than

-25 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
Aero LB, Aero LC, LSA3, LSA4, Mat Antenna, Laundry Stack and TR-CAU antennas meet

this requirement with a gain less than -25dBi.
Le lecteur Medio L40 a été conçu pour fonctionner avec les antennes citées ci-dessous et

ayant un gain maximum de -25dBi. Les antennes non inclus dans cette liste ou ayant un gain
supérieur à -25dBi sont strictement interdites pour un usage avec ce lecteur. L’impédance de
l’antenne doit être de 50 ohms.
Les antennes Aero LB, Aero LC, LSA3, LSA4, Mat antenna, Laundry Stack et TR-CAU
satisfont à cette exigence avec un gain inférieur à -25dBi.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is

subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of
the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil
ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

2.3 RoHS and WEEE Directives

2.3.1 RoHS (Restriction of the uses of certain Hazardous Substances)

TAGSYS certifies that this product is compliant with the European Directive 2002/95/EC for the
restriction in Electric and Electronic Equipments (RoHS) of the use of the following hazardous
substances:

• Lead

July 2013 2.3 15/56

Medio L40 - User's Guide

• Mercury

• Cadmium

• Hexavalent Chromium

• Polybrominated biphenyl flame retardants

• Polybrominated diphenyl ether flame retardants

This declaration is based on information provided by our suppliers and subcontractors.

2.3.2 WEEE (Waste Electrical and Electronic Equipment)

This product bears the selective sorting symbol for waste
electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to
European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment.
For further information, please contact your local or
regional authorities.

16/56 Revision 2.3 July 2013

Medio L40 - User's Guide

3 Overview

The Medio L40 is a long-range 13.56MHz RFID reader intended for RFID applications

requiring a high performance, long range RFID infrastructure.

The L40 uses advances in Digital Signal Processing (DSP) and RF Front End technology to
achieve breakthrough performance in read range and read speed with industry leading signal to
noise ratio. The L40 has been specifically designed to operate in noisy environments such as
manufacturing plants and distribution facilities while maintaining the highest levels of data integrity
for item level track and trace, inventory management and security. Designed as a network device,
the L40 conserves critical network bandwidth by filtering tag data to remove redundancies before
transmitting to enterprise systems.

With breakthrough sensor technology and self-diagnostic capability, the L40 is the industry’s
first self-correcting intelligent RFID reader. The L40 can be remotely managed and administered
to ensure you get the highest levels of performance from your RFID infrastructure. The L40 and e­connectware, TAGSYS’ comprehensive set of management and administrative tools, create an
intelligent platform to allow you to manage your RFID infrastructure just as you do a voice or data
network to enable scalable, secure and persistent RFID Quality of Service.

July 2013 2.3 17/56