Page 1
RCK-SD3.1 New Design TAG 3 Tier Dumbbell Rack with Saddles (10 pair)
OWNER’S MANUAL & PARTS LIST
www.tagfitness.net
630-375-1500
Page 2
EXPLOAD DRAWING
PART LIST
NO. Description Q’TY NO. Description Q’TY
1 Upright frame 2 10 Hex Screw M8*15 8
2 Upper Cross frame 1 11 Flat Washer Ф9*Ф16*1.6 80
3 Cross frame 2 12 Flat Washer Ф13.5*Ф24*2.5 24
4 Saddle 166*46.5*67 20 13 Spring Washer Ф8 40
5 Saddle 158*47.5*40 20 14 Nut M8 40
6 Rubber Shone 4 15 Nut M12 12
7 End Cap 50*100*2mm 4 16 Screw ST4.2*16 8
8 Hex Bolt M8*15 40 17 Name Plate 2
9 Hex Bolt M12*15 12 18 Rivet Ф4*12 4
Page 3
STEP 1
Assemble Upright frame (1) and Cross frame (3) using Hex Bolt M12*15(9), Flat Washer Ф13.5*Ф24*2.5(12) and
Nut M12 (15).Please don’t tighten all the bolts and nuts.
STEP 2
Assemble Upright frame (1) and Cross frame (3) using Hex Bolt M12*15(9), Flat Washer Ф13.5*Ф24*2.5(12) and
Nut M12 (15).Please don’t tighten all the bolts and nuts.
Page 4
STEP 3
Assemble Upright frame (1) and Upper Cross frame (2) using Hex Bolt M12*15(9), Flat Washer Ф13.5*Ф24*2.5(12)
and Nut M12 (15).Please tighten all the bolts and nuts.
Loading...