TAG PA-223 User Manual

Route de Lavérune Montée du Terral 34430 Saint Jean de Védas FRANCE
Tel : +33 (0)4 67 27 43 05 Fax : +33 (0)4 67 27 85 64
contact@tag-fr.com www.tag-fr.com
Techniques Audio Groupe
USER’S MANUAL
Example of one PA-223
PA-223 User’s Manual
2
PA-223 User’s Manual
3
SUMMARY
SUMMARY
INTRODUCTION
INTRODUCTION Page 3
ADVICE FOR A GOOD USE
ADVICE FOR A GOOD USE Page 3
BASIC EQUIPMENT
BASIC EQUIPMENT Pages 4-5
- Preamplifier Page 4
- ON/OFF button Page 4
- Talk Overs Page 4
- Volume Controls Page 4
- Tone adjustment Page 4
- Inputs Page 5
- Outputs Page 5
OPTIONS
OPTIONS Pages 5-12
- Amplifier Page 5
- Wireless receiver SDR-6216M Page 6
- Handheld microphone SQ-5016 + Charger Pages 6-7
- Beltpack transmitter SM-5016 + Charger Pages 8-9
- Audio transmitter RP-6016M Page 10
- Digital player T-EM040 Pages 11-12
TECHNICAL DATA
TECHNICAL DATA Page 13
INTRODUCTION
INTRODUCTION
Thank you for choosing PA-223. To ensure the best performance and get the maximum life out of the equipment, we recommend that you read this manual carefully.
PA-223 is an automatic mixer which can be equipped with 1 MP3/USB player, 1 audio transmitter or/and 1 UHF wireless module. This product only functions on AC main 100-240V, 47-63 Hz.
ADVICE FOR A GOOD USE
ADVICE FOR A GOOD USE
The exclamation point inside an equilateral triangle indicates the existence of internal components whose substitution may effect safety. Also indicates important operating instructions.
The lightning and arrowhead symbol warns about the presence of uninsulated dange­rours voltage. To reduce the risk of electric shock, do not remove the cover. Refer servi­cing to qualified personnel.
3 Do not use the sound system in a humid or dusty place, or near any heat sources such as radia-
tors, heat registers, neither under the sun or at very low temperatures.
3 Place the sound system in a ventilated place. 3 Be careful when moving this unit in order not to damage the electronics. 3 Carry the sound system with caution. 3 Do not forget to decrease the volume switch before turning off the sound system. 3 Handle the control switches carefully. 3 Clean the sound system regularly. 3 Keep the carton in case of return.Transport will be safe and without any risk of damage.
INPUTS
2 MIC INPUTS equipped with XLR(3 pins) connectors. The balanced inputs allow use of long cables. One condition: use high quality cables.
2 LINE INPUTS equipped with 2 dual RCA connectors, allowing to connect auxiliary product such as tuner, CD or Tape player. If both inputs are connected, you can use them simultaneously.
2 AUXILIARY INPUTS equipped with 2 dual RCA connectors, allowing to connect auxiliary pro­duct such as tuner, CD or Tape player. Both inputs have an independent volume control on the front panel.
POWER SUPPLY INPUT
12 Volts power supply input. Allows working on AC main. It is recommended to use the provided cable.
OUTPUTS
1 REC OUTPUT equipped with 2 dual RCA connectors, allowing to connect auxiliary product and to register for example a speech. 1 MASTER OUTPUT: PA-223 is equipped with 1 XLR line output so as to link it to another sound system. You just have to connect the PA-223 Line out to the Line in of the other correspondent product.
OPTIONS
OPTIONS
PA-223.A: The mixer PA-223 can be amplified: 1 x 70 W RMS or 2 x 70 W RMS.
PA-223 User’s Manual
5
PA-223 User’s Manual
4
BASIC EQUIPMENT
BASIC EQUIPMENT
PREAMPLIFIED
The automatic mixer PA-223 is preamplified.
ON/OFF BUTTON
Use this button to switch on/off the device.
TALK OVER
PA-223 is equipped with 2 voice priorities: 1 for the 1
st
MIC/Line input, the 2ndfor the wireless sys-
tem.
This function allows to speak while music is playing > Priority of speech over music. If this feature is activated the level of sound will decrease automatically as soon as the mic is open. The voice priority for the MIC/Line input overrides external music through the AUX1 input.
VOLUME CONTROLS
PA-223 is equipped with 5 independent volume controls: MIC/Line1, MIC/Line2, Aux1, Aux2 and the master volume control. It is the general volume control output. This setting allows to balance the different levels of each input.
TONE ADJUSTMENTS
PA-223 is equipped with 3 highly performing tone adjustments. 1 bass frequency tone control on 100 Hz with +/- 12 dB efficiency. 1 treble frequency tone control on 10000 Hz with +/- 12 dB efficiency. 1 voice adjustment especially designed for use in medium frequency which allows for a sharp increase of voice presence on the mic inputs.
To avoid the larsen effect when you switch on mics, do not turn the gain if you are not far from PA-223. ADVICE : We strongly recommend that you switch off the mic, adjust the volume of the PA-223 to the desired volume, then be a few meters away before switching on the mic again.
L
CAUTION : MIC Adjustment
Loading...
+ 4 hidden pages