TAG Bomber User Manual

BOMBER User’s Manual

24

USER’S MANUAL

Route de Lavérune
Montée du Terral
34430 Saint Jean de Védas
FRANCE

Tel : [phone]
Fax : [phone]

[e-mail]
www.tag-fr.com

Techniques Audio Groupe

NOTES

NOTES

BOMBER User’s Manual

23

BOMBER User’s Manual

2

SUMMARY

SUMMARY

INTRODUCTION

INTRODUCTION Page 03

ADVICE FOR A GOOD USE

ADVICE FOR A GOOD USE Page 03

BASIC EQUIPMENT

BASIC EQUIPMENT Pages 04-08

- MIC/LINE Input Page 04

- Tone Adjustment Page 04

- LINE Output Page 04

- Master Level Page 05

- Talk Over Page 05

- Receiver SDR-6216M Page 05

- Handheld Transmitter Microphone SQ-5016 Page 06
OR

- Belt transmitter SM-5016 Page 07-08

OPTIONS BOMBER

OPTIONS BOMBER Pages 8-20

- Chargers Page 08

- Transmitter RP-6016M Page 08

- PIED SPS 4 Page 09

- Players Pages 11 -20

TECHNICAL DATA OF BOMBER

TECHNICAL DATA OF BOMBER Page 21

NOTES

NOTES Pages 22-24

NOTES

NOTES

BOMBER User’s Manual

22

BOMBER User’s Manual

3

INTRODUCTION

INTRODUCTION

Thank you for choosing BOMBER. To ensure the best performance and get the maximum life out of
the equipment, we recommend that you read this manual carefully.

The 200-watt PAsound system BOMBER was especially designed for any PA application where
music and entertainment are critical to creating an inviting atmosphere for your clients.

ADVICE FOR A GOOD USE

ADVICE FOR A GOOD USE

Implementing

1) Place the BOMBER on its tripod stand (Pied SPS4) at approximately 2 meters high.
Place BOMBER on the floor, bend it on the front face to be able to slide the support stand in the
rail situated at the bottom of the BOMBER. Then put it all together on the stand at the lowest
position and adjust the stand at approximately 2 meters high. You should still be able to access
the CD player.

2) All levels have to be at a minimum.

3) Switch off the bouton TALK OVER

4) Press the bouton (O/I) on “I”

5) Power outlet: IEC / 220 V/ 50 Hz / fuse 3.15 A - Fuse drawer

You are ready to use BOMBER.

The exclamation point inside an equilateral triangle indicates the existence of internal
components whose substitution may effect safety. Also indicates important operating
instructions.

The lightning and arrowhead symbol warns about the presence of uninsulated dange­rours voltage. To reduce the risk of electric shock, do not remove the cover. Refer servi­cing to qualified personnel.

3 Do not use the sound system in a humid or dusty place, or near any heat sources such as radia-

tors, heat registers, neither under the sun or at very low temperatures.

3 Place the sound system in a ventilated place.
3 Be careful when moving this unit in order not to damage the electronics.
3 Carry the sound system with caution.
3 Do not forget to decrease the volume switch before turning off the sound system.
3 Handle the control switches carefully.
3 Clean the sound system regularly.
3 Keep the carton in case of return.Transport will be safe and without any risk of damage.

NOTES

NOTES

BOMBER User’s Manual

21

TECHNICAL DATA OF BOMBER

TECHNICAL DATA OF BOMBER

RMS Power 200 Watts RMS

Speaker 1 woofer 12” - 30 cm / 1 compression driver 1”

Power Requirements Operates on AC 220v

Frequency Response 50 Hz - 20 KHz

Inputs 1 RCA Line control input

1 balanced MIC control input + phantom power on XLR

Bands EQ Bass, Mid, Treble

Outputs Master volume control allows Bomber to work like a mixer

1 balanced XLR Line output
1 output Speaker on 2 Jack 6.35

Wireless System 1 UHF 16 frequency receiver: SDR-6216M

Player 1 player possible, choose between:

CD/USB player: CD-456
Digital player: EM010PR
Digital recorder: EM020R

Talk over (voice priority) for wireless MIC

MIC 1 Mic possible, choose between:

SQ-5016 Handheld MIC (BOMBER-MAIN)
TM-635D Earhook skin colour MIC + M-1002 Belt transmitter (BOMBER-BIS)

More Information Insert handle

35 mm (1.43") flange for floor stand
Dimensions: 60 x 41 x 40,5 cm / 23.6 x 16.1 x 15.9"
Weight : 24 kg / 52.8 lbs
Black plywood cabinet

BOMBER User’s Manual

4

BASIC EQUIPMENT

BASIC EQUIPMENT

1 MIC INPUT and 1 LINE INPUT

1 MIC INPUT equipped with XLR(3 pins) connectors/ Can be used with electret or dynamic mics
due to their phantom powers. The balanced inputs allow use of long cables. One condition: use
high quality cables.

1 LINE INPUT equipped with 2 dual RCA connectors, allowing to connect auxiliary product such
as tuner, CD or Tape player and a volume control. If both inputs are connected, you can use them
simultaneously. The buttom “Level” allows to adjust the volume of the MIC or LINE input.

1 AMPLIFIER output 200 Watts RMS

1 woofer 12” - 30 cm / 1 compression driver 1”

TONE ADJUSTMENTS

The BOMBER is equipped with 3 highly performing tone adjustments.
1 bass frequency tone control on 100 Hz with +/- 12 dB efficiency.
1 treble frequency tone control on 10000 Hz with +/- 12 dB efficiency.
1 voice adjustment especially designed for use in medium frequency which allows for a sharp
increase of voice presence on the mic inputs.

LINE OUTPUT

The BOMBER is equipped with 1 XLR line output so as to link it to another BOMBER or
to any sound system. You just have to connect the BOMBER Line out to the Line in of the
other correspondent product.

To avoid the larsen effect when you switch on mics, do not turn the gain if you are not
far from BOMBER. ADVICE : We strongly recommend that you switch off the mic,
adjust the volume of the BOMBER to the desired volume, then be a few meters away
before switching on the mic again.

LL

CAUTION : MIC Adjustment