INEO-GW2404G
24 Ports 10/100/1000M with
4 Combo Gigabit SFP Open Slot
Web Smart Switch
User’s Manual
FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
The Switch provides 24 10/100/1000Mbps
NWAY RJ-45 ports and can support 4 Combo
Gigabit SFP open slot to uplink. It is
designed for easy installation and high
performance in an environment where traffic
on the network and the number of user
increase continuously. With newest Gigabit
chip set, 19” Gigabit Ethernet switch can fully
support highest speed without hanging on
problem even when Full-Duplex full loaded.
The rack-mount size is specifically designed
for medium to large workgroups. The Switch
can be installed where space is limited;
moreover it provides smooth network
migration and is easy to upgrade the network
capacity. The 19” size can be rack-mount on
19” cabinet.
Key Features
24 Port PoE+ 10/100/1000M Nway
(Auto-negotiation) with 4 Combo Gigabit
SFP open Slot, Web Smart Switch
19” rack-mount size
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 2000Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
Front Panel (LEDs)
LED Indicators of 24
Ports Gigabit
+ 4 Combo Switch
LED Status Description No. Of
LED
Power On Power on Power
On Link Fiber
Flashing Data activating
Fiber
(F1-F4)
On Link 1000Mbps 1000M
off Link 10/100Mbps
24 (1~24)
On Link
24 (1~24)
Link/ ACT
Flashing Data activating 24 (1~24)
Package Contents
Before you start to install this Switch, please
verify your package contain the following
items:
• One Gigabit Switch
• Rack-mount Kit for Rack Installation
• One AC Power Cord
• CD : User Manual
Note: If any of these items is found missing or
damaged, please contact your local supplier for
replacement.
Connections
Switch/Hub to this 24 Ports Gigabit
+ 4 Combo SFP Ethernet Switch
This switch provides automatic crossover
detection functionality for any port. It is
simple and friendly to up-link to another switch
without crossover cable.
PC/Other devices to this 24 Ports
Gigabit + 4 Combo SFP Ethernet Switch
Via a twisted pair cable straight through, this
switch can be connected to PCs, servers and
other network devices.
Rear Panel (Power)
AC input
AC input (100~240V/AC, 50~60Hz)
Technical Specifications
Standards
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX
IEEE 802.3x Flow control
Features
RJ-45 Ports: 24
Combo SFP Ports: 4
MAC Address: 8K
Buffer Memory: 500 KB
Jumbo Frames: 9.6 KB
Method: Store and Forward
Filtering/
Forwarding
Rates
1000Mbps port –
1,488,000pps
100Mbps port – 148,800pps
10Mbps – 14,880pps
Transmission
Media
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5E UTP/STP
LED
Indicators
Per Port: LINK/ACT, 1000M,
F1-F4
Per Unit: Power
Power
Requirement
100~240V/AC, 50~60Hz
Power
Consumption
20 Watts (Max)
Dimensions
440 × 330 × 44 mm
(L x W x H)
Weight 3 kg
Operating
Temperature
0 to 45℃
Storage
Temperature
-20 to 90℃
Humidity
10 to 90% RH
(non-condensing)
Certifications FCC Class A, CE
Loading...