Page 1
Installation Instructions:
1) First mark where your wall anchors are going to be. Using a 24” board, space the brackets about 14” horizontally apart and make sure
they are level. It is easiest to place the bracket on the wall and mark the two spots for anchors per bracket. Your wall anchors should be 2”
vertically apart on each bracket. The wall anchors are designed to go through sheetrock, not studs. If your mounting holes happen to line up
with a stud, simply screw the screw directly into the stud and there is no need for the wall anchor.
NOTE: Since the wall anchors are made to go through sheetrock, if your walls are lath and plaster you will need to drill a pilot hole for the
wall anchors to screw in.
2) Use a Philips head screwdriver to easily screw the wall anchors into your drywall.
3) Use the (8) longer screws to then secure your brackets onto the wall.
4) Center your wooden board onto the brackets and then use the (4) smaller screws to secure your shelf to the bracket.
5) Step back and admire your new set of shelves!
Loading...