Page 1
TabLines TWE Tablet wall in solution
Mounting instructions
EN
Be sure to read the mounting instructions before installation - assembly - mounting!
This will protect you and prevent damage to your product.
Page 2
EN
1. Delivery................................................................................................................................. 3
2. Preparation before mounting................................................................................................ 4
3. Mounting on hollow walls / lightweight walls....................................................................... 5
3.1 Wall recess ...................................................................................................................................................5
3.2 Angle.............................................................................................................................................................. 5
3.3 Inserting the tablet holder........................................................................................................................5
3.4 Lock the tablet holder................................................................................................................................6
3.5 Inserting the tablet..................................................................................................................................... 6
3.6 Hooking in the upper frame..................................................................................................................... 6
4. Mounting on solid walls......................................................................................................... 7
4.1 Wall recess ...................................................................................................................................................7
4.2 Attaching the tablet holder...................................................................................................................... 7
4.3 Inserting the tablet..................................................................................................................................... 7
Inhaltsverzeichnis
4.4 Hooking in the upper frame..................................................................................................................... 8
5. Theft protection.....................................................................................................................8
6. Optional accessories.............................................................................................................. 9
6.1 TabLines TNT001 wall mounting USB power supply..........................................................................9
6.2. TabLines TWE conversion kit...................................................................................................................9
Appendix - Technical drawings for wall recess TWE.................................................................. 10
2
Mounting instructions TabLines TWE Tablet wall in solution - Version 2018-09
Page 3
1
2
3
4
5
6
Congratulations!
1
2
3
4
With the TabLines TWE Tablet wall in solution, you have decided for a high-quality product that offers great
convenience in terms of comfort and design on a high technical level.
The operational capability and lifespan of the TabLines TWE Tablet wall in solution depends on the proper and
professional installation, operation, maintenance and observance of the instructions contained in these
installation instructions. If necessary required electrical connections should only be made by the appropriate
specialist.
1. Delivery
EN
The package contains:
4x cylinder head screw with hexagon socket M4x8
6x stud M5x6
2x Angle
1x Tablet holder
5
1x Upper frame
6
1x hex key (only for products with theft protection)
Version 2 018-09 - Mounting instructions TabLines TWE Tablet wall in solution
3
Page 4
EN
2. Preparation before mounting
Please note the following instructions for proper attachment before the actual mounting:
1. Do not use or mount the TabLines TWE in a damp or wet environment.
2. The mounting site must have enough depth for the use of the wall installation and the cable routing.
3. Choose a location with sufficient Wi-Fi signal to get the full functionality of the tablet.
4. Carefully draw the measurements on the wall first to prepare the recess.
The dimensions for the wall recess can be found in the following table.
Detailed technical drawings can be found in the appendix.
Modell
Apple iPad 2/3/4/5 (2017)
Apple iPad Air 1/2
Apple iPad Mini
Apple iPad Pro 9.7 / 9.7 (2018)
Apple iPad Pro 10.5
Apple iPad Pro 12.9
Samsung Galaxy Tab 3/Tab 4
Samsung Galaxy Tab A/E/S2/S3 9.7
Samsung Galaxy Tab A 10.1
Samsung Galaxy Tab Pro 12.2
Samsung Galaxy Tab S2 8.0
Dimensions wall recess (W x H x D)
219 x 289 x 16,3 mm
219 x 289 x 16,3 mm
171 x 251 x 15 mm
219 x 289 x 16,3 mm
219 x 289 x 16 mm
264 x 363 x 15,4 mm
291 x 210 x 16,9 mm
219 x 289 x 16,3 mm
219 x 289 x 16,3 mm
337 x 240 x 16 mm
171 x 251 x 15 mm
When mounting the tablet, it is recommended to mount in portrait or landscape format, adjusted to the
position of the home button.
5. You can also charge your tablet in the TWE. Through the opening in the case bottom, you can pass a power
cable through. An appropriate power cord is not included and must be purchased separately.
4
Mounting instructions TabLines TWE Tablet wall in solution - Version 2018-09
Page 5
3. Mounting on hollow walls / lightweight walls
3.1 Wall recess
Draw the dimensions anywhere on the wall
(lightweight wall). Choose a mounting in portrait or
landscape format, adjusted to the position of the home
button.
Cut out the required area.
Check if the recess is big enough..
Fig. 1: Drawing the dimensions
3.2 Angles
EN
Fig. 2: Screwedangles
Depending on the wall, the TabLines TWE can be
mounted with or without the included brackets.
Comply with the mounting depth of the tablet wall
mounting.
Mounting without angles:
If the TabLines TWE is even on the wall, the tablet
holder can be screwed directly onto the wall. It is not
necessary to mount the angles. If the distance is too
large, attach a piece of wood with the appropriate
depth on the rear side before attaching the housing
and screw the housing onto it.
Mounting with angles:
If the cavity is too large, the angles should be used
(see Fig. 2). For example, use wooden pieces to attach
the angles to / in the recess in the wall so that the
tablet holder can be attached to it.
3.3 Position the tablet holder on the brackets or
directly on the wall and secure the case to the
brackets using the supplied M4 screws (see Fig. 3).
Make sure all screws are tight..
Fig. 3: Mounting the tabletholder
Version 2 018-09 - Mounting instructions TabLines TWE Tablet wall in solution
5
Page 6
EN
Fig. 4: TheTabletholder remainsadjustable after
tightening; Correcting bumps usingM5 screws
3.4 Lock the tablet holder
Thanks to the slots on the tablet holder, the housing
can still be moved horizontally after tightening to
ensure optimum grip. If the position of your TabLines
TWE is correct, tighten the screws more tightly.
With the included M5 screws, the mounting depth can
still be slightly corrected to compensate for mistakes
in attaching the angle or unevenness of the wall. You
can simply screw the six M5 screws (see Fig. 4) in or
out with the hex key.
Fig. 5: Inserted tablet
3.5 Inserting the tablet
Note that the tablet's homebutton is facing down.
Place the tablet between the insertion strips as shown
in Figure 5 (the insertion strips are already supplied
glued in).
Make sure your tablet does not fall off during
assembly. Whenever possible, hold it down firmly
until the top frame secures the tablet.
3.6 Hookingin the upper frame
Hook the top frame into the tablet holder. Make sure
that the housing is hooked into the respective screws
(see Fig. 6)..
Fig. 6: Hooking in the upper frame
6
If you have purchased a TWE with an accessible home
button, it can still be reached after closing the cover,
as long as the top frame has been fixed properly.
Your tablet is already securely mounted and fully
functional.
Mounting instructions TabLines TWE Tablet wall in solution - Version 2018-09
Page 7
4. Mounting on solid walls
Abb. 7: Drawing the dimensions
EN
4.1 Wall recess
Draw the measurements anywhere on a wall. Choose a
mounting in portrait or landscape format, adjusted to
the position of the home button..
Cut or mill out the required area. Be sure to pay
attention to the depth of your recess, so that the upper
frame can later lay flat on the wall.
4.2 Attaching the tablet holder
Fig. 8: Mountedtabletholder;Correctingbumps by
adjusting the M5 screws
After you have prepared the recess and selected the
correct depth, you can simply screw the tablet holder
in the recess. Use the supplied M4 screws.
With the included M5 screws, the installation depth
can still be slightly corrected to compensate for
unevenness of the wall. You can simply screw the six
M5 screws (see Fig. 8) in and out with a hex key.
Alternative mounting options of the tablet holder on
the wall are special adhesives, construction foam or
tape..
4.3 Inserting the tablet
Note that the tablet's homebutton is facing down.
Place the tablet between the insertion strips as shown
in Figure 9 (the insertion strips are already supplied
glued in).
Be careful not to drop your tablet during assembly.
Whenever possible, hold it down firmly until the top
frame secures the tablet.
Abb. 9: Insertedtablet
Version 2 018-09 - Mounting instructions TabLines TWE Tablet wall in solution
7
Page 8
EN
Fig. 10: Hooking in theupperframe
4.4 Hooking in the upper frame
Hook the top frame into the tablet holder. Make sure
that the housing is hooked into the respective screws
(see Fig. 10)..
If you have purchased a TWE with an accessible home
button, it can still be reached after closing the cover,
as long as the top frame has been fixed properly..
Your tablet is already securely mounted and fully
functional.
5. Theft protection
Please note: This is only available if you have purchased a TabLines TWE model with anti-theft protection. The
theft protection can not be added later..
Use the supplied allen wrench to tighten the special
safety screw through the hole in the front of the top
frame (see Figure 11).
The safety screw is already integrated in the upper
frame and does not have to be inserted by yourself.
The safety screw prevents unauthorized persons from
removing the upper frame.
Fig. 11: Tightening the safetyscrew
8
Mounting instructions TabLines TWE Tablet wall in solution - Version 2018-09
Page 9
6. Optional accessories
Fig. 12:TabletinsidetheTWEcan be charged with wall-
mounted TabLines TNT001 poweradapter; Wires ofthe
powersupplyto connectto the poweroutlet
EN
6.1 TabLines TNT001 wall mounting USB power
supply
For the permanent power supply of your tablet in a
TWE Tablet wall mounting, the TabLines TNT001
power supply is recommended. The compact form of
the TabLines TNT001 can be integrated into
conventional flush-mounted switch boxes (System
55).
The two wires of the power supply can be easily
connected to the power source. In case you do not
wish to mount your TWE directly over a power outlet,
the power line can be routed by an experienced
electrician so that you can mount the power supply to
a desired location on the wall
Attach the flush-mount switch box directly to the back
of the tablet holder at the opening and insert the
TNT001 power adapter to provide your tablet with
power unseen and permanently.
6.2. TabLines TWE conversion kit
The TWE Tablet wall in solutions are designed for
mounting in portrait or landscape format - depending
on how the home button of the respective tablet is
positioned.
With the TabLines TWE conversion kit portrait /
landscape fixation, you can now also mount Apple
iPads in landscape mode and Samsung Galaxy Tabs 3
and 4 in portrait format. Thanks to the small accessory,
the anchorage, which was originally intended for
portrait or landscape mode (depending on the TWE
selected), now also has a different format.
ATTENTION: Not required for theft-protected TWEs -
these are basically suitable for mounting in portrait
and landscape format!
Abb. 13: Das TWE Umbau-Set (oben) wirdaufder
RΓΌckseite des Oberrahmens befestigt(unten)
Version 2 018-09 - Mounting instructions TabLines TWE Tablet wall in solution
9
Page 10
EN
Appendix - Technical drawings for wall recess TWE
Fig. 14
Fig. 16 Fig. 17
Fig. 15
Fig. 18
10
Fig. 19
Mounting instructions TabLines TWE Tablet wall in solution - Version 2018-09
Page 11
Abb. 14: Dimensions recess for TWE for Samsung Galaxy
Tab 3 und Tab 4 (B x H x T): 291 x 210 x 16,9 mm
Abb. 15: Dimensions recess for TWE for Samsung Galaxy
Pro 12.2 (B x H x T): 337 x 240 x 16 mm
Abb. 16: Dimensions recess for TWE for Apple iPad Mini
oder Samsung Galaxy Tab S2 8.0
(B x H x T): 171 x 251 x 15 mm
Abb. 17: Dimensions recess for TWE for Apple iPad 2/3/4,
Air 1/2, iPad 5 (2017), Pro 9.7/9.7 (2018) oder Samsung Galaxy
Tab A 10.1/E/S2 9.7/S3 9.7/S4 10.5
(B x H x T): 219 x 289 x 16,3 mm
Abb. 18: Dimensions recess for TWE for Apple iPad Pro 12.9
(B x H x T): 264 x 363 x 15,4 mm
EN
Abb. 19: Dimensions recess for TWE for Apple iPad Pro 10.5
(B x H x T): 219 x 289 x 16 mm
Notes
Version 2 018-09 - Mounting instructions TabLines TWE Tablet wall in solution
11
Page 12
TabLines TWE Tablet wall in solution
Contact us
Your TabLines dealer / specialist partner
TabLines
Am Marienhof 8
22880 Wedel
Germany
Changes reserved
E-Mail: info@tablines.com
Web: www.tablines.com
Tel.: +49 (0) 4103 / 90387 - 0
Fax: +49 (0) 4103 / 90387 - 11
Loading...