USER MANUAL
Wireless calling system--T0918+T0818+T0112
Receiver T0918 Call button T0818 Signal repeater T0112
A.System Feature
* Include Receiver, call button and signal repeater
* Suitable for the restaurant,coffee bar,fitness,spa center,hotel and so on
* Receiver T0918 has High brightness OLED display with 3 remind modes
* Receiver T0918 Can work with 200pcs T0818 call buttons in max.
* Receiver T0918 can Store 20 calling informations in order.
B.Program--Pair Receiver T0918 with Call button T0818
Function key(Left key)
1)When stand-by,press Function key for 2seconds to enter into Function setting.
Short press to exit Function setting.
2)Under calling history query , press Function key to check the previous calling information.
3)Under setting calling number,press Function key to move to next digit.
Confirm key(Middle key)
1)Under Function setting status,it is “Confirm” function.
2)Under calling history query , press Confirm key to delete current calling information.
Adjust key (Right key)
1)When stand-by,press Adjust key for 5seconds to power on/off T0918
2)Under calling history query , press Adjust key to check the next calling information.
3)Under setting calling number status,press Adjust key to choose number or letters.
1.Detail function setting
When stand-by,press Function key for 2seconds to enter into Function setting.
Press Adjust key to choose the Function and press Confirm key to enter into the detail function setting.
1)New button
①
Press Confirm key to enter “New button” setting.
②Press Function key and Adjust key to choose the calling number,then press Confirm key.
2. Press again,will cancel call number on the Receiver T0918,the greem light will be off at the meanwhile.
③Press the key on call button to add new button.
A.If need to name each key on call button,press Adjust key and Confirm key to choose the service
type.Then set next call button or choose “BACK” to exit.
B,If choose the fixed service types for different working environment,just need to set the calling number
and no need to set service type. Then set next call button or choose “BACK” to exit.
2)Delete button
①Press Ajust key and Confirm key to enter “Del button” setting.
②
Press Ajust key to choose “Single remove “or “All remove”
A.If choose “Single remove “,press each call buttons to be deleted,then will show”Remove done”
B.If choose “All remove”,all the call buttons will be deleted within 5seconds.Then exit.
3)Vibrator switch
①Press Ajust key and Confirm key to enter “Vibrator switch” setting.
②
Press Ajust key to choose “OFF”/ “ON”.
③
Press Confirm key to exit.
4)Time set
①Press Ajust key and Confirm key to enter “Time set” setting.
②
Press Function key and Ajust key to choose the time.
③Press Confirm key to exit.
5)Language
①Press Ajust key and Confirm key to enter “Language” setting.
②Press Ajust key to choose the Language.
③
Press Confirm key to exit.
6)Reset
①Press Ajust key and Confirm key to enter “Reset” setting.
②
Press Ajust key to choose “Cancel”/ “Yes”.
③
Press Confirm key to exit.
C.Call Button T0818
1. Press the call button on the Transmitter T0818,the green light will on and Receiver T0918 will receive
the signal and show the number.
Loading...