T3 73701, 73702 User Manual

FACEBOOK.COM/T3MICRO

YOUTUBE.COM/T3MICRO

PINTEREST.COM/T3MICRO

INSTAGRAM.COM/T3MICRO

TWITTER.COM/T3MICRO

WWW.T3MICRO.COM

Become a fan and discover

The Science of Fabulous

Receive information on special offers, new product

releases, stylist tips, and other news from the

behind the scenes world of T3.

IMPORTANT

SAFETY INSTRUCTIONS

OPERATING INSTRUCTIONS

T3 Voluminous Hot Rollers

OPERATING INSTRUCTIONS

T3 Voluminous Hot Rollers

OPERATING INSTRUCTIONS

T3 Voluminous Hot Rollers

Professional Hot Rollers

Model No. 73701 & 73702

Voluminous

Hot Rollers

User Guide

• The plug on this appliance is a polarized plug with one blade that is
wider than the other. As a safety feature, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.

• Always store this appliance and cord in a moisture-free area. Do
not store it in temperatures exceeding 140°F (60°C).

• Never block the air openings of the appliance or place it on a soft
surface, such as a bed or couch, where the air openings may be
blocked. Keep the air openings free of lint, hair, etc.

• Do not touch the roller sockets that hold the rollers or the roller
surfaces. They are hot.

• Attachments may be hot during use.

• Do not operate with a voltage converter.

AUTO WORLD VOLTAGE

This appliance contains a special electronic circuit that automatically
converts it for worldwide usage from 100 to 240 volts AC, 50/60 Hz.
Just plug it into the local outlet and use it as normal; the Voluminous
Hot Rollers will automatically adjust to the local current. You may
need an adapter to allow the plug to fit into the local outlets, however.

For connection to a 240-volt supply, use an attachment plug adapter
of the proper configuration for the power supply receptacle.

MAINTENANCE INSTRUCTIONS

T3 Voluminous Hot Rollers

1. Your appliance is virtually maintenance free. it contains no user
serviceable parts, and no lubrication is needed.

2. Keep heated surfaces clean and free of dust, dirt and hairspray.

3. If cleaning becomes necessary, disconnect the appliance
from the power source and let it cool. Wipe the exterior with
a damp cloth.

4. If cleaning becomes necessary, disconnect the appliance from
the power source, and let it cool first. Wipe the exterior with a
damp cloth.

5. If any malfunction occurs, unplug the appliance, allow it to cool
and return it to a service center for repair.

6. Always allow the appliance to cool completely before storing it in
a safe, dry location.

7. Never wrap the cord around the appliance since this will cause
the cord to wear prematurely and break. Store the cord loosely
coiled. if the cord becomes twisted, untwist prior to use.

8. If a malfunction occurs, unplug the appliance, allow it to cool,
and return it to a service center for repair.

9. Do not attempt to repair the appliance yourself.

Charging

Base

Polarized

Plug

ON/OFF

Switch

Detachable

Electrical

Cord

Ready-to-use

Indicator

8 Heated

Styling Rollers

in 2 Sizes

ON/OFF
Indicator

8 Clips

Handle hot rollers by

top and bottom edges

SAVE THESE INSTRUCTIONS

DANGER

KEEP AWAY FROM WATER

Electricity and water are a dangerous combination and can

cause death by electric shock. Do not allow electrical cords

to come into contact with water or other liquids.

ELECTRICAL APPLIANCES ARE ELECTRICALLY LIVE WHEN

PLUGGED IN, EVEN IF TURNED OFF.

To reduce the risk of death by electric shock:

1. Always unplug the appliance immediately after using.

2. Do not use while bathing.

3. Do not place or store appliance where it can fall or be
pulled into a tub or sink.

4. Do not place in or drop into water or other liquid.

5. If appliance falls into water, unplug it immediately. Do not
reach into the water.

READ ALL INSTRUCTIONS BEFORE USING

When using electrical appliances, especially when children

are present, basic safety precautions should always be

followed, including the following:

IMPORTANT

SAFETY INSTRUCTIONS

WARNING

To reduce the risk of burns, electrocution, fire or injury to persons:

1. An appliance should never be left unattended when
plugged in.

2. Close supervision is necessary when this appliance is
used on, or near, children or individuals with certain
disabilities.

3. Use this appliance only for its intended use as described
in this manual. Do not use attachments not
recommended by the manufacturer.

4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, or if it has been dropped,
damaged, or dropped into water. Return the appliance to
a service center for examination and repair.

5. Keep the cord away from heated surfaces. Do not wrap
the cord around the appliance.

6. Never use while sleeping.

7. Never drop or insert any object into any opening or hose.

8. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.

9. Do not use an extension cord with this appliance.

IMPORTANT

SAFETY INSTRUCTIONS

HOW TO USE YOUR

T3 Voluminous Hot Rollers

Divide the hair at the back of
your head into 4 equal sections
(upper left, upper right, bottom
left, bottom right). Roll each
section under and clip into place.

HOW TO USE YOUR

T3 Voluminous Hot Rollers

Press the On/Off switch and
wait 2-3 minutes for the unit to
heat up. The ready-to-use
indicator on each roller will turn
white when it is fully heated.
Note: The butterfly clips should
never be left directly on the
rollers when they are on the
heated charging base.

Begin at the top of the head,
near the crown. Select a section
of hair approximately 2” long
and 3” wide, and place a roller*
behind the section against the
ends of the hair.

HOW TO USE YOUR

T3 Voluminous Hot Rollers

A: Wind the roller down to
the head and secure with
the roller clip.

B: Repeat with the front section.

180º

90º

45º

A B

HOW TO USE YOUR

T3 Voluminous Hot Rollers

Continue this process with
one roller on either side of the
head. Lift sections* at least 45°
from head, place the roller under
the section and wind towards
the head.

45º

5

Let rollers cool for 10 minutes
before removing clips. By rolling
from ends to roots, the finished
look will have a strong curl at
the ends. Unclip and style
as desired.

For a more defined style, leave
rollers in for a longer period
of time.

6

HOW TO USE YOUR

T3 Voluminous Hot Rollers

ALTERNATIVE STYLING TECHNIQUE

(FOR A CONSISTENT WAVE PATTERN THROUGHOUT)

Place the roller at the base and
roll the hair section from the
root to the ends.

1

UG-73701r1

MODEL NO. 73701 & 73702

SPECIFICATIONS

Model No. 73701

Ratings: 120V~60Hz 190 WATTS

240V~50Hz 210 WATTS

Model No. 73702

Ratings: 120V~60Hz 150 WATTS

240V~50Hz 170 WATTS

T3 Micro, Inc.

Gardena, CA USA

Made in China

WWW.T3MICRO.COM

T3 LIMITED WARRANTY

TERMS & CONDITIONS

SAVE THESE INSTRUCTIONS

HOW TO USE YOUR

T3 Voluminous Hot Rollers

ALTERNATIVE STYLING TECHNIQUE

(FOR A CONSISTENT WAVE PATTERN THROUGHOUT)

Allow rollers to cool before
removing clips. By rolling from
roots to ends, a more even
wave pattern is created
throughout the hair.

3

For additional styling tips, visit www.youtube.com/T3micro

To purchase additional rollers, visit www.T3micro.com

Repeat this technique for the
sides and back of the head.

2

* Expert Tips
Use the smaller diameter roller for shorter hair lengths
for the best results.

1 ½ revolutions around the roller results in a voluminous
C curl. 3 revolutions around the roller results in a soft S
wave.

* Expert Tip
Increase the elevation to 90° or
180° for even greater volume.

Visit www.T3micro.com/register to complete your
warranty registration.

T3 Micro will repair or replace (at our option) T3 products for twenty-four (24)
months from the date of purchase if they are defective in workmanship or
materials. This limited warranty does not cover (1) damage due to misuse or
abuse, such as incorrect voltage supply, dropping, or failure to follow
enclosed instructions or (2) tampering, such as repair or attempted repair.
To obtain service under this warranty, please call 1.888.340.8880 or email us
at [e-mail] to obtain a Return Authorization Number as well as
explicit instructions on how to return the defective product. You will be
required to return the defective product with a proof of purchase, payment
in the amount of $9.95 (brushes/irons) or $14.95 (dryers and showerheads) to
cover shipping and handling, and a brief description of the product's
deficiencies. Please clearly mark the Return Authorization Number on the
outer packaging when sending us the defective item.

THIS LIMITED WARRANTY IS ONLY VALID IF THE PRODUCT IS PURCHASED
FROM AN AUTHORIZED SELLER OF T3 GOODS AND IF THE ORIGINAL
SERIAL NUMBER ON THE PRODUCT HAS NOT BEEN REMOVED OR
OTHERWISE TAMPERED WITH.

Any implied warranties, obligations, or liabilities, including but not limited to
the implied warranty of merchantability and fitness for a particular purpose,
shall be limited in duration to the 24 month duration of this written limited
warranty. Some states do not allow a limitation on how long an implied
warranty lasts, so the above limitation may not apply to you.

IN NO EVENT SHALL T3 BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER
WARRANTY, EXPRESS OR IMPLIED.

WARNING

Do not use the appliance near a bath tub,

washbasin or other vessel filled with water. Never

place the appliance in water or any other liquid.