SZ DJI TECHNOLOGY T650A1609 Users manual

User Manual

Preparing Aircraft and Battery

Exiting Packing Mode

The aircraft enters Packing Mode to enable easy packing during transportation. It is
required to disable Packing Mode when using the aircraft on its first use.

1. Plug in both Intelligent Flight Batteries onto the aircraft. Powering on to exit

Packing Mode.

2. Press and release on the power button on the Intelligent Flight Batteries for up to

5 times to exit Packing Mode.

Installing Camera and Gimbal

Power off the aircraft.

1. Press and hold the mounting button on the gimbal mount.

2. Align the white dot on the camera connector with the red dot on the gimbal mount,
follow by mounting the camera onto the gimbal mount.

3. Rotate the locking ring on the camera so that the red dot on the camera is aligned with
the red dot on the gimbal mount.

Using the Remote Controller

Press and release the power button on the remote controller, wait for 3 seconds then press
and hold the power button to power on the remote controller.

Aircraft Diagram

1. FPV (First Personal View) Camera

2. Obstacle Sensing System

3. Quick Release Mount

4. Vision Positioning System

5. Landing Gear Servo

6. Graphic Processing System

7. Front LED

8. Motor

9. Propellers

10. Rear LED

11. Intelligent Flight Battery

12. Power Button

13. Battery Level Indicator

14. Battery Eject Button

15. Top Sensor

16. Aircraft Status Indicator

17. SSD Port

18. USB Port

20. USB Mode Button

21. Link Button

Remote Controller Diagram

[1] Antennas
Relays aircraft control and video signal.
[2] Mobile Device Holder
Securely mounts your mobile device to the remote controller.
[3] Control Stick
Switch between Mode 2 and
Mode 1 by using the DJI GO app.
[4] RTH Button
Press and hold the button to initiate Return to Home (RTH).

[5]Transformation Switch
This switch comprises of two options.
Toggle this switch to lower or retract the landing gear.
[5] Battery Level LEDs
Displays the battery level of the remote controller.
[7]Status LED
Displays the remote controller's system status.
[7] Power Button
Used to turn the remote controller on and off.
[8] RTH LED
Circular LED around the RTH button displays RTH status.

[10] Camera Settings Dial
Turn the dial to adjust camera settings.
[11] Pause Button
Press this button to pause the current operations including Tapfly, Follow me.
[13]Shutter Button
Press to take a photo.
[12] Flight Mode Switch
Use this switch to switch between