SZ DJI TECHNOLOGY HG8001606 Users manual

DJI Focus Expansion Module User Guide

V1.0 2016.06

Disclaimer and Warning

Congratulations on purchasing your new DJITM product. The information in this document affects your
safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper
configuration before use. Failure to read and follow instructions and warnings in this document may result
in serious injury to yourself or others, or damage to your DJI product or damage to other objects in the
vicinity. This User Manual and all other collateral documents are subject to change at the sole discretion
of DJI. For up-to-date product information, visit http://www.dji.com and click on the product page for
this product.

By using this product, you hereby signify that you have read this disclaimer and warning carefully and
that you understand and agree to abide by the terms and conditions herein. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with all applicable laws, rules,
and regulations, and all terms, precautions, practices, policies and guidelines DJI has made and may make
available.

DJI accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from

the use of this product. The user shall observe safe and lawful practices including, but not limited to,

those set forth in this User Manual.

DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as “DJI”) and its affiliated companies.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of

their respective owner companies.

In the Box

Expansion Module x1

Power and Communication Cable x1

Introduction

The DJI Focus Expansion Module is used to extend the communication distance of the DJI Focus. It

is compatible with the Matrice 600 when used with the Ronin-MX or Zenmuse X5/X5R. The DJI

Focus Expansion Module can also be used to wirelessly control the Inspire 1 Pro/RAW camera’s

Do not use the original antenna on the DJI Focus Remote Controller. Instead, use

the 5.8 GHz antenna provided with the DJI Focus Expansion Module.

aperture and focus from 3.1 miles (5 km) away.

1. Antenna

2. DJI Focus Remote Controller Power Button

3. Link Button

4. DJI Focus Expansion Module Power Switch

5. Communication Port

6. Lock Knob

7. Status LED

Usage

1. Remove the original antenna from the DJI Focus Remote Controller.

2. Attach the Expansion Module to the DJI Focus Remote Controller as shown, then tighten the

lock knob to secure the Expansion Module.