SZ DJI TECHNOLOGY FC2001307 User Manual
PHANTOM VISION
User Manual V1.00
DJI Camera
FC200
2013.0614Revision
For NAZA-M Firmware Version V3.12
& Assistant Software Version V2.12
Thank you for purchasing this DJI product. Please strictly follow these steps to use this product, including
PHANTOM VISION and DJI VISION App.
Please regularly check the web page of PHANTOM VISION at our website
www.dji-innovations.com, which is updated regularly. Product information, technical updates
and manual corrections will be available on this web page. Due to unforeseen changes or product upgrades,
the information contained in this manual is subject to change without notice.
This manual is only referenced for basic assembly and configuration; you can obtain more details and
advanced instructions when using the Assistant software or DJI VISION App. To assure you have the latest
information, please visit our website and download the latest manual and software.
If you have any problem that you cannot solve during usage, please contact your dealer.
© 2013 DJI Innovations. All Rights Reserved.
Index
INDEX ............................................................................................................................. 2
DISCLAIMER & WARNING ............................................................................................... 3
TRADEMARK .................................................................................................................. 4
CERTIFICATIONS ............................................................................................................. 4
SYMBOL INSTRUCTION ................................................................................................... 4
IN THE BOX ..................................................................................................................... 4
PRODUCT INSTRUCTION ................................................................................................. 4
ASSEMBLY ............................................................................................................................ 5
AIRCRAFT RECOGNITION .......................................................................................................... 5
TRANSMITTER RECOGNITION .................................................................................................... 6
BASIC USAGE OF AIRCRAFT AND TRANSMITTER ............................................................................ 6
CAMERA RECOGNITION ........................................................................................................... 7
RANGE EXTENDER RECOGNITION............................................................................................... 8
CAMERA AND RANGE EXTENDER REBIND .................................................................................... 9
DJI VISION APP ............................................................................................................. 10
DOWNLOAD AND INSTALLATION .............................................................................................. 11
WI-FI NETWORK SELECTION .................................................................................................. 11
LOGIN ................................................................................................................................ 11
MAIN PAGE ........................................................................................................................ 12
CAMERA PAGE ..................................................................................................................... 13
CAMERA PAGE--CAMERA SETTINGS ......................................................................................... 14
ALBUM PAGE—ALBUM IN CAMERA SD CARD ........................................................................... 17
ALBUM PAGE—ALBUM IN MOBILE DEVICE ................................................................................ 19
NEWS PAGE ........................................................................................................................ 20
SETTINGS PAGE .................................................................................................................... 20
APPENDIX ..................................................................................................................... 22
MC/PMU FIRMWARE UPGRADE ............................................................ 错误！未定义书签。
© 2013 DJI Innovations. All Rights Reserved.2 |
AUTOPILOT SYSTEM LED DESCRIPTION ..................................................................................... 23
SPECIFICATION ..................................................................................................................... 23
Disclaimer &Warning
Please read this disclaimer carefully before using the product. By using this product,
you hereby agree to this disclaimer and signify that you have read them fully. THIS
PRODUCT IS NOT SUITABLE FOR PEOPLE UNDER THE AGE OF 18.
Despite the built-in autopilot system and our efforts in making the control as safe as possible, we strongly
recommend users to remove all propellers when calibrating and setting parameters. Make sure all
connections are good, and keep children and animals away during firmware upgrade, system calibration and
parameter setup. DJI Innovations accepts no liability for damage(s) or injuries incurred directly or indirectly
from the use of this product in the following conditions:
1. Damage(s) or injuries incurred when users are drunk, taking drugs, drug anesthesia, dizziness, fatigue,
nausea and any other conditions no matter physically or mentally that could impair your ability.
2. Damage(s) or injuries caused by subjective intentional operations. Any mental damage compensation
caused by accident.
3. Failure to follow the guidance of the manual to assemble or operate.
4. Malfunctions caused by refit or replacement with non-DJI accessories and parts.
5. Damage(s) or injuries caused by using third party products or fake DJI products.
6. Damage(s) or injuries caused by mis-operation or subjective mis-judgment.
7. Damage(s) or injuries caused by mechanical failures due to erosion, aging.
8. Damage(s) or injuries caused by continued flying after low voltage protection alarm is triggered.
9. Damage(s) or injuries caused by knowingly flying the aircraft in abnormal condition (such as water, oil,
soil, sand and other unknown material ingress into the aircraft or the assembly is not completed, the
main components have obvious faults, obvious defect or missing accessories).
10. Damage(s) or injuries caused by flying in the following situations such as the aircraft in magnetic
interference area, radio interference area, government regulated no-fly zones or the pilot is in backlight,
blocked, fuzzy sight, and poor eyesight is not suitable for operating and other conditions not suitable
for operating.
11. Damage(s) or injuries caused by using in bad weather, such as a rainy day or windy (more than
moderate breeze), snow, hail, lightning, tornadoes, hurricanes etc.
12. Damage(s) or injuries caused when the aircraft is in the following situations: collision, fire, explosion,
floods, tsunamis, subsidence, ice trapped, avalanche, debris flow, landslide, earthquake, etc.
13. Damage(s) or injuries caused by infringement such as any data, audio or video material recorded by the
use of aircraft.
14. Damage(s) or injuries caused by the misuse of the battery, protection circuit, RC model and battery
chargers.
15. Other losses that are not covered by the scope of DJI Innovations liability
© 2013 DJI Innovations. All Rights Reserved.3 |
Trademark
Forbidden(Important)
Cautions
Tip Reference
PHANTOM Aircraft X1
5.8GHz Transmitter X1
Camera X1
Range extender X1
Charger X1
Battery X1
PropellerX8
mobile device Mounting X1
Guide X1
AC Adapter X3
Sticker(Several)
Q
u
i
c
k
S
t
a
r
t
G
u
i
d
e
DJI and PHANTOM VISION are registered trademarks of DJI Innovations. Names of product, brand, etc.,
appearing in this manual are trademarks or registered trademarks of their respective owner companies. This
product and manual are copyrighted by DJI Innovations with all rights r eserved. No part of this product or
manual shall be reproduced in any form without the prior written consent or authorization of DJI
Innovations. No patent liability is assumed with respect to the use of the product or information contained
herein
Certifications
This product is approved with quality standards such as CE, FCC and RoHS.
Symbol Instruction
In the Box
Product Instruction
© 2013 DJI Innovations. All Rights Reserved.4 |
Assembly
Built-in
NAZA-M Autopilot System
(Refer to NAZA-M manual for details)
GPS & Compass Module
R/C Receiver
Power System for Flight
LED Indicator
USB Interface
(in the Battery Compartment)
Function
ATTI./GPS ATTI. Mode
Intelligent Orientation Control
Enhanced Fail-Safe
Low-Voltage Alert
Takeoff Weight:<1200g
Direction LED Red
Aircraft nose
Propeller
Damping Unit
Landing Gear
Compass
Rotor
LED Indicator
Power cable
Antenna
Direction LED
Fig.1: PHANTOM VISION Fig.2: Transmitter& iOS & Range Extender
AircraftRecognition
© 2013 DJI Innovations. All Rights Reserved.5 |
TransmitterRecognition
Working Frequency: 5.8GHz ISM
Control Channel Numbers of Transmitter:
6
Communication Distance: 300m
Receiver Sensitivity(1%PER): ＞-93dBm
Power Consumption of Transmitter: ＜
20dBm
Working Current/Voltage: 52 mA@6V
AA Battery (5#): 4 Required
Transmitter Aircraft
（ is the nose direction）
GPS ATTI. Mode/ATTI. Mode
Throttle stick is for aircraft up& down control.The aircraft will
hold the height automatically if the stick is centered. You
should Push the throttle stick to the neutral position to take-off
the multi-rotor. Note that the stick returns to the central
position when released for the transmitter V3.5. For the
version below 3.5, the stick cannot hold the central position
when released.
Yaw stick is for aircraft rudder control.
Command stick controls the angular velocity of the aircraft,
with the maximum rudder angular velocity of 200°/s. Left stick
command gives counter clock-wise rotation of the aircraft, &
vice versa.
Roll stick is for aircraft left/right control and Pitch stick is for
front/back control. Command stick controls the angle of the
aircraft.Stick neutral position is for 0˚, its endpoint is 35˚. The
roll and pitch sticks return to the central position when
released.
In GPS Mode, the aircraft will hover (hold horizontal
position) when sticks released.
In ATTI. Mode, the aircraft will keep attitude stabilizing
without horizontal position (different from hover in GPS
OFF
CL
HL
GP S
ATT I
ATT I
Basic Usageof Aircraft and Transmitter
Definitions
Stick neutral position and stick released means the stick of Transmitter is pushed to the central position.
Command Stick means the stick of Transmitter is pushed away from the central position.
© 2013 DJI Innovations. All Rights Reserved.6 |
Mode).
GPS ATTI. ATTI. ATTI.
(Manual
or
Failsafe is
selectable
in
software.)
3-position switch (S1) on the Transmitter for mode control.
Only after Compass Module connection and Compass
calibration, GPS ATTI. Mode is available. Otherwise, all switch
positions are for ATTI. Mode. Pay attention because the GPS
ATTI. Mode is dependent on the number of GPS satellites
acquired by the main controller. Refer to the LED Indicator.
When GPS signal has been lost for 3s, system enters ATTI.
Mode automatically. You can enable the Manual Mode or Fail
Safe (also known as One-key Go-home) in the assistant
software->Basic->R/C->Control Mode.
OFF Course Lock Home Lock
3-position switch (S2) on the Transmitter for Intelligent
Orientation Control (IOC). Set the switch to OFF in basic flight.
This function is defaulted to off. If you want to use this
function refer to the advanced manual, and enable it in the
assistant software. Use IOC when you are familiar with basic
flight.
LED
WIFI
CAMERA
Solid on
OFF
Power On; Idle State
[2]
[1]
[3]
[4]
[5]
CameraRecognition
[1]Power Switch(on the back of the camera)
Three stops:
(1) OFF – Powered off
(2) CAM ON – Power on, Wi-Fi off
(3) WIFI ON –Power and Wi-Fi are both on
[2]LED Indicator (on the back of the camera)
© 2013 DJI Innovations. All Rights Reserved.7 |
Slow Blink (0.2s on, 1.8s off)
ON
Idle State
Fast Blink (0.1s on, 0.3s off)
ON
Accessing photos and videos in the camera
Solid on
OFF
Recording
Blink Once(0.2s on, 0.3s off)
ON/OFF
making a single capture
Blink 3 Times(0.1s on, 0.1s off)
ON/OFF
making a multiple capture,3 or 5 pictures per shot
Fast Blink(0.1s on, 0.3s off)
ON/OFF
Firmware Upgrading
(0.2s green, 1.8s amber)
ON
Recording
Solid on
ON/OFF
Critical error
Blink Slow (0.2s on, 1.8s off)
ON/OFF
Sensor error
Blink Once(0.2s on, 0.3s off)
ON/OFF
Operation failed
Blink 3 Times(0.1s on, 0.1s off)
ON/OFF
SD Card error
Blink Fast(0.1s on, 0.3s off)
ON/OFF
Upgrade error
(0.5s Green, 0.5s Amber,
0.5s Red, 0.5s Off)
ON/OFF
Camera overheat
When camera temperature goes above 80℃, the LED indicator will blink and the camera
will automatically power off when the temperature goes above 85℃
Statuses including Red is either error or malfunction
Camera in idle state
short press (<2s)
single capture
long press (≥2s)
record
Camera in non-idle
state
any press
back to idle state
[1]
[2]
[3]
[4]
[5]
[3]Micro-SD Card Slot(on the back of the camera)
Make sure that the Micro-SD card is inserted before you take any pictures or make any videos.
[4]Power Plug(on the back of the camera)
[5]Function Button(on the bottom of the camera)
Range ExtenderRecognition
[1]Switch: (1) OFF – Power off
© 2013 DJI Innovations. All Rights Reserved.8 |
Loading...