SystemRoMedic
TM
Manual no: 724 Ver. 10 140313
Manual - English
Rowalker400
SWL: 180 kg/400 lbs
English
RoWallker400 is a walker that is used as an aid to walking training by patients with impaired leg strength and
balance. RoWalker400 is designed for early mobilization specially for cardio-thoracic and abdominal post surgical
patients. Features include integration for oxygen, drain bags and IV poles. What distinguishes the RoWalker400 from
other walkers is that it is equipped with seat pads that can be used either to provide extra security when the legs are
weak or to sit on when the patient needs a rest during walking/mobility training.
SystemRoMedic is a series of different models of transfer assistive devices. The choice of assistive devices depends on
the transfer situation and the patient’s functional capability and needs.
Visual inspection
Check the condition and function of the assistive device regularly. Check to ensure that seams and material are free from
damage. If there are signs of wear, the product must be inspected and serviced.
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
The product should be inspected yearly, and otherwise as required, by a qualified technician. Service must be performed
by a qualified technician.
Functional inspection
Always read the manual
Description of parts
1. Seat support
2. Arm support
3. Control for hight adjustment
4. Handles
5. Leg support
6. Foot pedal for leg spread
adjustment
7. Castors with brake
8. Hooks for portable oxygen
system
9. Castors with direction lock
10. Locking clamp
11. Star knob for arm support
1
10
4
5
6
7
7
4
3
10
8 8
9 9
2
2
11
11
1
MANUAL
SystemRoMedic
TM
SystemRoMedic
TM
Rowalker400
Functions
• Split seat support: can both swing out and flip up (image 2)
• Soft leg support: can be tilted (image 1)
• Foot pedal: for leg spread adjustment to enable easy access to chair or wheelchair (image 1)
• Control with height adjustment: ergonomical and easy for the patient to hold, while the arm rest can be set at the
right height with the help of pressurized air (image 3)
• Hooks for portable oxygen system: Two hooks for convenient mounting of a portable oxygen system that the patient
can use during walking training (image 3).
1
2 3
• RoWalker400 is not intended for long transfers.
• RoWalker400 can only be used on flat floor.
To transfer with RoWalker400, the patient must be able to:
• Support weight while standing
• Stand up and maintain balance (with support)
• Grasp handles
• Understand instructions
Special requirements and conditions
!
Testing standing function
RoWalker400 is ideal for testing a patient’s standing
function in cases where there is uncertainty as to whether
the patient is able to rise from a seated to a standing
position.
Training standing function
Rowalker400 can be used to train the patient’s standing,
sitting and sit-to-stand function. To measure improvement,
use a stopwatch or clock with a second hand to time the
patient.
Walking/mobility training
• RoWallker400 is a walker that is used as an aid to walking training by patients with impaired leg strength and
balance. What distinguishes the RoWalker400 from other walkers is that it is equipped with seat pads that can
be used either to provide extra security when the legs are weak or to sit on when the patient needs a rest during
walking/mobility training.
• Adjust the arm support to the appropriate height for the patient.
• Place RoWalker400 as close to the patient as possible and ask the patient to place his/her legs against the leg
support.
• The patient can then rise to a standing position, place the arms on the arm support and grasp the handles. If nec-
essary, adjust the height of the arm support. The arm support is then secured in place with the locking handle.
English
MANUAL
SystemRoMedic
TM
1013
1172
906
321 5
C
D
4 6
78
B
A
1013
1379
321 5
C
D
4
67A8
B
906
987
1379
694
321 5
C
D
4 6
7
B
8
A
Dimensions
English
MANUAL
SystemRoMedic
TM
Care of the product:
•Useasoftclothandmildcleaningagentsuchas
dishwashing liquid or car shampoo to clean
RoWalker400. Do not use abrasive cloths or brushes.
•Donotusesolvents.
•Todisinfect,use70%alcohol.
Technical information
Accessories
OxygenTankHolder
An accessory that the can be attached to the RoWalker400 enables
convenient use of an oxygen tank during walking training.
Seat width: 480 mm 18.9”
Seat depth: 265 mm 10.43”
Castor Ø Ø80 mm Ø3.15”
Weight:
37,5kg 82,67lbs
Weight incl. OxygenTankHolder: 43,5 kg 95.9 lbs
Max. weight capacity: 180 kg 400 lbs
English
MANUAL
SystemRoMedic
TM
Loading...