System Q HDM401 Installation Manual

Features

• 1 HDMI Out, 4 HDMI In

• Display up to 4 Signals on 1 Screen

• Built in HDMI Switcher

• Remote Control Included

FUNCTION SPECIFICATION

Video Inputs 4

Video In Connection HDMI

Video Outputs 1

Video Out Connection HDMI

Power 12V DC

Current Consumption 450mA

PSU Supplied

Controls

Push Button & IR Remote

Remote Control Included

Screen Display 7 Display Modes

Dimensions 190 x 90 x 23mm

Specication

Recommended Accessories

PART CODE DESCRIPTION

VID501 HDMI-HDMI LEAD 1M PLG-PLG

VID502 HDMI-HDMI LEAD 2M PLG-PLG

VID503 HDMI-HDMI LEAD 3M PLG-PLG

VID505 HDMI-HDMI LEAD 5M PLG-PLG

VID510 HDMI-HDMI LEAD 10M PLG-PLG

All specications are approximate. System Q Ltd reserves the right to change any product specications or features without notice. Whilst every eort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible in any way for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non-performance of the equipment that these instructions refer to.

This symbol on the products and/or accompanying documents means that used electronic equipment must not be mixed with general household waste. For treatment, recovery and recycling please return this unit to your trade supplier or local designated collection point as dened by your local council.

WEE/CG0783SS

01246 200 000 systemq.com

HDMI QUAD 1080P - 4 INPUTS 7 MODES

HDM401

Other Products To Consider

HDMI Switch 3x1,

4K, 3D, Remote

Control

HDM170

KVM Switch Control

your PC/DVR/NVR

over a LAN

HDM210

HDMI Splitter1in 8

Out

HDM308

Handy Quad HD-

TVI/AHD/Analogue

QUAD050

HDMI Quad Viewer

The HDM401 can take 4 HD video and audio signals and display on a single HD monitor. There are 7 dierent modes that can be selected which includes quad formats, two channel, single channel xed or sequencing modes.

Buttons on the HDM401 can be used for video and audio selection but can also be controlled using an IR remote which is supplied, along with a 12 V DC 5A PSU.

Installation Instructions

Connect 4 HD feeds to the HDM401 using HDMI cables of 15 metres maximum. Connect a HDMI cable from the unit to a HDMI monitor, again no longer than 15 metres. Connect the 12 V DC 2A power supply to the 2.1mm power socket and connect the mains to the power supply.

You can now use the buttons on the from of the HDM401 to select video and audio. Note that you may prefer using the IR remote supplied with this unit to do this as you will not have to go through all the options to select the one you require. Please note that you can

only select 720p or 1080p output using the remote control.

The HDM401 supports the following output resolutions:

Input Resolutions: 1080p, 1080i, 1360 x 768, 1280 x 1024, 1024 x 768, 720p

Output Resolutions: 1080p, 720p

The monitor picture displays may need adjusting using settings in the monitor menu if the format causes irregular shapes e.g. oval shapes, circles etc.