Syrelec, Brand of Crouzet Control SHS SERIES Data Sheet

TIMERS TIMERS

Products and specifications subject to change without notice.

Order/Technical Support – Tel: [phone] / FAX: [phone] / www.crouzet-usa.com

2/45

2

SHS SERIES

INTERVAL TIMER WITH
SOLID STATE OUTPUT

UL listed CSA recognized

• Epoxy Encapsulated

• DIN-Rail or Base Mounting

• Internal or External Time Set

• Fixed Time

P.S.: Specify maximum time for “D” and “P” versions.

The solid state output turns on when the input power (S1) is
applied. The output turns off at the end of time (T). The timer is
reset when the input power is removed.

Function H:

Internal Timer



Input Power S1

Output

T

t

0

HS-P

= internal potentiometer

MOUNTING

HS-D

SERIES

300S

TIME RANGE

DIMENSIONS See page 3-34

SPECIFICATIONS:

Input . . . . . . . . . . . . . . . . . . . . . . 24 VAC, 48 VAC, 110 VAC

Maximum power consumption . . 24 VAC: 0.2 VA

Output . . . . . . . . . . . . . . . . . . . . . SCR

Output Rating . . . . . . . . . . . . . . . max.: 1.0 A at 20°C

Repetition accuracy . . . . . . . . . . ±0.5% at a constant ambient

Temp. rise derating . . . . . . . . . . . 5 mA / °C

Reset time . . . . . . . . . . . . . . . . . . 100 ms after timing

Leakage current during timing .2 mA max.

Peak surge current . . . . . . . . . . . 20 A < 10 ms

Peak surge voltage . . . . . . . . . . . 1400 V, 100 µs

Terminals . . . . . . . . . . . . . . . . . . Faston 1/4˝ (6.35mm)

Operating temperature . . . . . . . . -22°F to +140°F -30°C to +60°C

Weight . . . . . . . . . . . . . . . . . . . . . 1.9 oz. (55g)

ORDERING INFORMATION:

S

S

= Encapsulated, requiring
DIN-Rail, Panel
Adapter or Base Mounting

Holes

WIRING DIAGRAM:

220 VAC, ±15%, 50/60 Hz

48 VAC: 0.3 VA
110 VAC: 0.6 VA
220 VAC: 1.2 VA

min.: 10 mA

150 ms during timing

Note: Available with internal potentiometer in HS-P Series.

(100 pcs. minimum order)

= Fixed time

HS

HS-D = remote potentiometer

HS = Fixed .1s. - 120 min

HS-D
HS-P

Maintain 100:1 ratio

=.1 sec. - 120 min. Maintain 10:1 ratio

=1-10 sec. or min., 10 - 100 sec. or min.

SHS SHS-D SHS-P

S1 S1 S1

LOAD LOAD LOAD

220A L

INPUT POWER UL

24A = 24 VAC

48A = 48 VAC

110A

= 110 VAC

220A

= 220 VAC

470 K

POTENTIOMETER

A2 18 A1A2 18 A1 A2 18 A1 Z1 Z2

1 AMP