Page 1
Toll Free: 1-888-865-6888
Tel: 510-226-8368 Fax: 510-226-8968
Email: sales@RackmountMart.com
Page 2
User Manual
1U 17″ Full HD LCD Console Drawer
Ultra short depth
400mm / 15.7″
LCD1U17-30
LCD1U17-39
Page 3
Legal Information
First English printing, January 2018
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■ Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■ Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■ Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■ If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■ Observe all precautions and warnings attached to the equipment.
■
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■ Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fi re or electrical shock.
■ Only qualifi ed service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■
If any part of the equipment becomes damaged or stops functioning, have it checked by qualifi ed service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modifi ed or removed.
■ Damage, deterioration or malfunction resulting from:
□ Accident, misuse, neglect, fi re, water, lightning, or other acts of nature, unauthorized product modifi cation, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fl uctuation or failure.
□ Use of supplies or parts not meeting our specifi cations.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■
Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifi cations made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.RackmountMart.com
Page 4
Options
3.1 3G / HD / SD-SDI Broadcast-grade input
3.2 HDMI 1.3 video input
Audio input & output ( LCD1U17-30 only )
3.4 DC Power : 12V / 24V / 48V / 125V
3.5
2-post rack mounting brackets
< Part. 3 >
P.16
P.17 - 18
P.19 - 20
P.21
P.22
< Part. 2 >
Specifi cations / OSD
2.1 Product Specifi cations
2.2 Keyboard / Mouse Specifi cations
2.3 On-screen Display Operation ( OSD )
P.9 - 10
P.11 - 13
P.14 - 15
< Part. 1 >
Contents
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Installation
1.4 Connection
P. 1
P.2 - 3
P.4 - 6
P.7 - 8
KVM integration
< Part. 4 >
P.23
P.24
www.RackmountMart.com
LCD1U17-30 / LCD1U17-39
03.3 17"
Touchscreen : Resistive 1-point touch
4.1 LCD1U17-30
4.2 LCD1U17-39
Page 5
■ It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■ To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■ When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■ Use only cleansers made specifi cally for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the fi nish.
■ Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfi ber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfi ber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfi ber cloth fi rst, not directly on the parts you are cleaning.
3
4
www.RackmountMart.com
Page 6
- 6ft DVI-D console cable X 1
( Alternative : 6ft VGA console cable )
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
- 6ft DVI-D console cable X 1
( Alternative : 6ft VGA console cable )
- 2.5A Power adapter & Power cord X 1
- M6 screw, cage nut & cup washer X 8
< 1.1 > Package Content
P. 1
< Part 1 >
The above package content is only for the single console models.
It varies with options such as KVM, SDI, HDMI, Touchscreen & DC power.
< 1.2 > Structure Diagram
4
1
2
5
6
7
3
11
9
10
8
11
10
9
8
7
6
5
4
3
1
LCD interchangeable module kit
Membrane switch (KVM option)
Installation Slides
LCD membrane
Micro switch for screen auto power off
Audio speaker ( for SDI or HDMI option )
Keyboard interchangeable module kit
Mouse interchangeable module kit
Blue Power LED
Front USB port for device access
( USB Hub KVM only )
Molded front handle
2
6
4
5
8
2
1
3
7
8
7
6
5
4
3
1
LCD interchangeable module kit
Installation Slides
Molded front handle
Audio speaker ( for SDI or HDMI option )
LCD membrane
Micro switch for screen auto power off
Keyboard interchangeable module kit
Mouse interchangeable module kit
2
LCD1U17-39LCD1U17-30
www.RackmountMart.com
Page 7
< 1.2 > Dimension - LCD1U17-30
Side View
Top View
Front View
The weight is only for the single console models. It varies with accessories & options
such as KVM, SDI, HDMI, Audio & DC power.
UNIT : mm
1mm = 0.03937 inch
Model
Product Dimension
(W x D x H)
Net
Weight
LCD1U17-30
441.6 x 460 x 44 mm
17.4 x 18.1 x 1.73"
10.8 kg
23.8 lb
Power
VGA
DVI-D
Rear View
P. 2
www.RackmountMart.com
Page 8
Side View
Top View
Front View
The weight is only for the single console models. It varies with accessories & options
such as KVM, SDI, HDMI & DC power.
UNIT : mm
1mm = 0.03937 inch
Model
Product Dimension
(W x D x H)
Net
Weight
LCD1U17-39
441.6 x 400 x 44 mm
17.4 x 15.7 x 1.73"
8.6 kg
18.9 lb
Rear View
PowerVGADVI-D
< 1.2 > Dimension - LCD1U17-39
P. 3
www.RackmountMart.com
Page 9
< 1.3 > Installation - Installation Slides
■ Fix the LCD console drawer into the rack.
Complete the installation
Step
3
■
Insert the left and right rear mounting brackets into
the LCD console drawer.
Step
1
Step
2
■ Measure the depth of the front and rear mounting rails.
■
Align each rear mounting bracket to a suitable length.
M6 screw, cage nut & cup washer x 8 are provided.
P. 4
www.RackmountMart.com
Page 10
P. 5
■ Hold the handle and slide out the
drawer.
■
Operate the LCD console drawer.
■ Flip up the LCD to a suitable angle.
< 1.3 > Installation - How to use the LCD1U17-30 drawer
www.RackmountMart.com
Page 11
< 1.3 > Installation - How to use the LCD1U17-39 drawer
■
Press the handle button and gently slide out
the drawer.
■ Flip up the LCD to a suitable angle.
■ Operate the LCD console drawer.
P. 6
www.RackmountMart.com
Page 12
< 1.4 > Connection to USB Server via DVI cable
< 1.4 > Connection to external KVM via DVI cable
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
DVI-D
LCD Console Drawer
USB server
KVM
DVI-D
console cable
Power
DVI-DUSB
DVI-D
DVI console KVM
LCD Console Drawer
Power
DVI-D
console cable
DVI-D USB
KVM
P. 7
* LCD1U17-39 is in external power
* LCD1U17-39 is in external power
www.RackmountMart.com
Page 13
LCD Console Drawer
< 1.4 > Connection to USB Server via VGA cable
< 1.4 > Connection to external KVM via VGA cable
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
DVI-D
KVM
USB server
VGA
console cable
VGAUSB
DVI-D
KVM
LCD Console Drawer
USB console KVM
USB VGA
VGA
console cable
P. 8
www.RackmountMart.com
* LCD1U17-39 is in external power
* LCD1U17-39 is in external power
Page 14
Compliance EMC FCC & CE certifi ed
Safety CE / LVD certifi ed
Environment RoHS2 & REACH compliant
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption for
Single Console
Screen ON Max. 25W
Power saving mode Max. 4W
Power button OFF Max. 1W
Power Consumption
with KVM integration
Screen ON Max. 55W
Power saving mode Max. 34W
*For details, please refer to our KVM rear kit user manuals
< 2.1 > Product Specifi cations
LCD
Panel
Native Resolution 1920 x 1080
Panel Size ( diagonal ) 17.3"
Brightness ( cd/m² ) 400
Contrast Ratio ( typ. ) 600:1
Colors 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 80/80/60/80
Response Time ( ms ) 40
Dot pitch ( mm ) 0.1989
Display Area ( mm ) 381.888H x 214.812V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
P.9
Video Digital HDMI HDMI 1.3 / HDCP 1.3
DVI-D DVI-D, TMDS single link
Analog
VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & PAL
S-Video ( 4-pin ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
www.RackmountMart.com
LCD1U17-30 / LCD1U17-39
Page 15
Applicable
Format
DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
Audio Signal 2ch Linear PCM
HDMI Input
PC Signal Same as VGA
HDMI 1.3
1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
*In some circumstances, if the user connects the LCD to PC via HDMI port
or video and audio signals, the LCD may display incorrectly on a full screen.
If so, please adjust the display card setting on display size to fi x the issue.
Physical
Specifi cation
Product ( W x D x H ) 441.6 x 460 x 44 mm 441.6 x 400 x 44 mm
17.4 x 18.1 x 1.73 inch 17.4 x 15.7 x 1.73 inch
Net Weight 10.8 kg / 23.8 lb 8.6 kg / 18.9 lb
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 20~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 5~500Hz 1G RMS random
P. 10
www.RackmountMart.com
LCD1U17-30 LCD1U17-39
Page 16
Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
OS support Windows / Linux / Unix / Mac OS
< 2.2 > Standard Keyboard / Mouse Specifi cations
Supporting layouts
America
United States
EMEA
United Kingdom Germany France Spain Norway
Italy Russia Switzerland Netherlands Portugal
Asia
China Japan Korea Arabia Turkey
P.11
www.RackmountMart.com
keyboard integrated with trackball
B
keyboard integrated with touchpad
N
Page 17
< 2.2 > MAC Keyboard / Mouse Options
F8F7 F8F8F7
F8F7 F8F8F7
P.12
How to Use "MAC" Keyboard
Keyboard Features
F1
Decrease display brightness
F9
Fast-forward
F2
Increase display brightness
F10
Mute sound
F3
Mission control
* Only works with OS X Lion
default Keyboard Shortcuts.
F11
Decrease volume
F4
Dashboard
F12
Increase volume
F7
Rewind
Eject disc
F8
Play / Pause
Command
Supporting layouts
America
United States
www.RackmountMart.com
MAC keyboard integrated with trackball
Mb
MAC keyboard integrated with touchpad
Mn
Page 18
Audio / Display Keys * Please ask your supplier for full details
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
< 2.2 > SUN Keyboard / Mouse Options
P.13
Num LED in Green mode
Key pad behaves as a normal key
pad mode
Num Caps Scroll ComposeNum Caps Scroll Compose
■
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
■ 104 key notepad keyboard with full numerical pad and SUN function
■
USB interface
■ US layout only
Num LED in Off mode
Key pad behaves as a SUN Solar
system administration command mode
How to Use "S" Keyboard
www.RackmountMart.com
SUN keyboard integrated with touchpad / trackball
SUN keyboard integrated with trackball
Sb
SUN keyboard integrated with touchpad
Sn
Page 19
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Scroll through menu options and adjust
the displayed control
Display the OSD menu
Act as an Enter key to select screen setting options
Turn the monitor on or off
Membrane Switch Function
Remark : All LED touch buttons in WHITE light.
The LED of Power touch button will fl ash continuously when there is no signal input.
All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power ).
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power ).
1
2
< 2.3 > On-screen Display Operation ( OSD )
P.14
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / off LCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
www.RackmountMart.com
LCD1U17-30
LCD1U17-39
Page 20
< 2.3 > On-screen Display Operation ( OSD )
P.15
Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness : Adjust background black level of the screen image
Contrast : Adjust the difference between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation :
Adjust the saturation of the image color
Picture size : Adjust the image size
Color temp : Standard / Cool / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness :
Adjust the image from weak to sharp
1
PC
Auto adjust : Automatically adjust sizes, centers and fi ne tunes the
video signal to eliminate waviness and distortion.
Clock : Adjust the clock value
Phase : Adjust the phase value
H. Position : Align the screen image left or right
V. Position : Align the screen image up or down
2
MISC
Language : Select the language in which the OSD menu is
displayed - English
Sleep timer : Set the off time
PIP mode :
Adjust picture in picture setting
PIP position : Enter into PIP position
PIP source : Enter into the Sub source and sound source
System reset : Return the adjustment back to factory setting
Information : Select for Help
4
Audio
Audio mode : Movie / Voice / Normal / Music mode to choose
Volume : Adjust the volume of sound
Bass :
Set the value of bass sound
Treble : Set the value of treble sound
Balance : Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn off the surrounding sound
3
www.RackmountMart.com
Page 21
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
***
For SDI option, LCD1U17-30 chassis extension in depth to 530mm ( 20.9” )
SDI
out - in
Power
KVM
DVI-D
P.16
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
SDI
out - in
PowerDVI-D
KVM
www.RackmountMart.com
Our SDI input is an ideal solution for the broadcast-grade video
and high resolution CCTV market.
Designed for use with NOVA series displays, a SDI input
module can support up to 1080p @60Hz resolution without
using additional space or power and it comes standard with a
1-year warranty.
LCD1U17-39
LCD1U17-30
Page 22
Audio
Power
KVM
DVI-DHDMI
in - in - out
PC Video
( Built-in Dual Stereo Speakers, 2W x 2 )
( 3.5mm audio jacks for audio in & out )
- Audio
( HDCP 1.3 )
- HDMI 1.3
( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to fi x the issue.
( 2 ) Adding HDMI: LCD1U17-30 chassis extension in depth to 480mm ( 18.9” )
Adding AV / Audio: LCD1U17-30 chassis extension in depth to 530mm ( 20.9” )
< 3.2 > LCD1U17-30 Options :
P.17
www.RackmountMart.com
Page 23
< 3.2 > LCD1U17-39 Options :
P.18
( HDCP 1.3 )
- HDMI 1.3
( 1 ) In some circumstances, if the user connects the LCD to PC via HDMI port for video and audio
signals, the LCD may display incorrectly on a full screen. If so, please adjust the display card
setting on display size to fi x the issue.
Power
KVMDVI-D
HDMI
www.RackmountMart.com
* Due to limited space to the rear kit, only 1 input signal (DVI or HDMI) other than VGA can be applied
Page 24
Model
TRB Resistive
Technology
5-Wire Resistive
Touch Point
Single
Input Type
Finger or Stylus
Resolution
2048 x 2048
Response Speed
15 ms
Activation Force
≤ 50 g
Surface Hardness
3H
Light Transmission
80% ± 3%
Haze
8% ± 3%
Durability
10 million touches
Top Layer
ITO Film
Bottom Layer
ITO Glass
Thickness
2.2 ± 0.2 mm
Connector
USB Type A
Compatibility
Windows 7 / XP / Vista, Linux
< 3.3 > Options : Touchscreen & driver
■
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■
For detailed information, please refer to the attached CD disc
■
As the touchscreen unit is not made of toughened glass, please handle it carefully
P.19
Power
KVM
DVI-D
Power
DVI-D KVM
USB Touchscreen
USB Touchscreen
www.RackmountMart.com
17" USB Touchscreen Specification
LCD1U17-39
LCD1U17-30
Page 25
TRB Driver
Step 1. Run the bundled CD disc or download the driver from the link below :
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to fi nish the setup
Step 4. After installation, run the TouchKit program & the “4 point calibration”
Please follow the below steps to setup the touch screen:-
Please do the initial calibration
after the fi rst setup
< 3.3 > Options : Touchscreen & driver
P.20
www.RackmountMart.com
http://www.rackmountmart.com/downloads.html
Page 26
DC power
KVM
DVI-D
< 3.4 > Options : DC Power
Model 12V 24V 48V 125V
Input rating
Input voltage: 12-Volt 24-Volt 48-Volt 110-Volt
Input range: 9 ~ 18V 18 ~ 36V 36 ~ 75V 66 ~ 160V
Input current
- No load 50 mA 50 mA 50 mA 35 mA
- Full load 4950 mA 2450 mA 1220 mA 749 mA
Output rating
Output voltage: 12-Volt 12-Volt 12-Volt 12-Volt
Output current: 4.16A 4.16A 4.16A 6.25A
Effi ciency 84% 85% 85% 91%
P.21
LCD1U17-30
( 1 ) If the unit with LCD, earthing may be required
( 2 ) DC option excludes AC power adapter and power cord.
( 3 ) LCD1U17-30 chassis extension in depth to 530mm ( 20.9” )
( 4 ) LCD1U17-39 chassis extension in depth to 490mm ( 19.3” )
For DC power option :
***
DC power
DVI-D KVM
LCD1U17-39
www.RackmountMart.com
Page 27
This step is necessary for front.
Failure to complete this will cause damage.
Apply if
necessary
■
Fix the LCD console drawer to the mini brackets
with 6#32*4.5 mm screw x 8.
■ Installation completed
Right bracket
Step
1
■ Before apply 2-post rack brackets, please release
front mounting ears and rear mounting wheels.
■
Attach left and right mounting brackets to the
drawer with the screws below :
6#32*3.5 mm screw x 8 ( only for front )
6#32*4.5 mm screw x 6 ( only for rear )
Step
2
■ Attach the set of 4 mini brackets to the 2-post rack.
■ M6 screw set is not provided.
P. 3
Left bracket
P.22
fl at head screw
6#32*4.5mm x 3
round head screw
6#32*3.5mm x 4
M6 screw
set x 8
Step
■
Insert the drawer into the mini brackets.
Step
3
Step
4
fl at head screw
6#32*4.5mm x 2
fl at head screw
6#32*4.5mm x 2
Round head screw only for front
www.RackmountMart.com
< 3.5 > 2-Post Rack Mounting Brackets
Page 28
< Part 4 >
< 4.1 > LCD1U17-30 KVM Integration
P.23
Model
Product Dimension
(W x D x H)
Net Weight
LCD1U17-30 w/ KVM
441.6 x 580 x 44 mm
17.4 x 22.8 x 1.73"
11.6 kg
25.5 lb
www.RackmountMart.com
** console upgrade option for resolution support 1920 x 1080
Matrix
Cat6 KVM
Combo
Cat6 KVM
DVI-D KVM
Remote
1
2
0
0
0
1
1
1
2
3
Remote
LCD1U17-30-U8KVM2IP
1
0
0
0
LCD1U17-30-U8KVM2
1
0
LCD1U17-30-U8KVM
Remote
0
LCD1U17-30-12DVI
0
8-port 16-port 32-port
-
-
-
-
-
LCD1U17-30-MU164IP2
LCD1U17-30-MU163IP
LCD1U17-30-MU162
LCD1U17-30-MU163
LCD1U17-30-MU164
LCD1U17-30-MU324IP2
LCD1U17-30-MU323IP
LCD1U17-30-MU322
LCD1U17-30-MU323
LCD1U17-30-MU324
8-port 16-port 32-port
LCD1U17-30-U16KVM2IP
LCD1U17-30-U16KVM2
LCD1U17-30-U16KVM
LCD1U17-30-U32KVM2IP
LCD1U17-30-U32KVM2
LCD1U17-30-U32KVM
12-port
USB Hub
DB-15 KVM
Matrix
DB-15 KVM
Combo
DB-15 KVM
Remote
1
0
0
LCD1U17-30-H8KVM2IP
0
LCD1U17-30-H8KVM2
1
0
LCD1U17-30-H8KVM
Remote
LCD1U17-30-M83IP
1
2
0
0
0
1
LCD1U17-30-M84IP2
1
1
LCD1U17-30-M82
2
3
Remote
1
0
0
LCD1U17-30-8KVM2IP
0
LCD1U17-30-8KVM2
1
0
LCD1U17-30-8KVM-u
8-port 16-port
LCD1U17-30-H16KVM2IP
LCD1U17-30-H16KVM2
LCD1U17-30-H16KVM
8-port 16-port
LCD1U17-30-M163IP
LCD1U17-30-M164IP2
LCD1U17-30-M162
LCD1U17-30-M163LCD1U17-30-M83
LCD1U17-30-M164LCD1U17-30-M84
8-port 16-port
LCD1U17-30-16KVM2IP
LCD1U17-30-16KVM2
LCD1U17-30-16KVM-u
Page 29
< 4.2 > LCD1U17-39 KVM Integration
P.24
Model
Product Dimension
(W x D x H)
Net Weight
LCD1U17-39 w/ KVM
441.6 x 540 x 44 mm
17.4 x 21.3 x 1.73"
10.4 kg
22.9 lb
www.RackmountMart.com
The company reserves the right to modify product specifi cations without prior notice and assumes no responsibility
for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Copyright 2018 Synergy Global Technology Inc. All rights reserved.
** console upgrade option for resolution support 1920 x 1080
Matrix
Cat6 KVM
Combo
Cat6 KVM
DVI-D KVM
Remote
1
2
0
0
0
1
1
1
2
3
Remote
LCD1U17-39-U8KVM2IP
1
0
0
0
LCD1U17-39-U8KVM2
1
0
LCD1U17-39-U8KVM
Remote
0
0
8-port 16-port 32-port
-
-
-
-
-
LCD1U17-39-MU164IP2
LCD1U17-39-MU163IP
LCD1U17-39-MU162
LCD1U17-39-MU163
LCD1U17-39-MU164
LCD1U17-39-MU324IP2
LCD1U17-39-MU323IP
LCD1U17-39-MU322
LCD1U17-39-MU323
LCD1U17-39-MU324
8-port 16-port 32-port
LCD1U17-39-U16KVM2IP
LCD1U17-39-U16KVM2
LCD1U17-39-U16KVM
LCD1U17-39-U32KVM2IP
LCD1U17-39-U32KVM2
LCD1U17-39-U32KVM
12-port
LCD1U17-39-12DVI
Matrix
DB-15 KVM
Combo
DB-15 KVM
Remote
1
2
0
0
0
1
1
1
2
3
Remote
1
0
0
LCD1U17-39-8KVM2IP
0
LCD1U17-39-8KVM2
1
0
LCD1U17-39-8KVM-u
8-port 16-port
LCD1U17-39-M83IP
LCD1U17-39-M84IP2
LCD1U17-39-M82
LCD1U17-39-M83
LCD1U17-39-M84
8-port 16-port
LCD1U17-39-16KVM2IP
LCD1U17-39-16KVM2
LCD1U17-39-16KVM-u
LCD1U17-39-M163IP
LCD1U17-39-M164IP2
LCD1U17-39-M162
LCD1U17-39-M163
LCD1U17-39-M164
Loading...