Synergy 5811 User Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA [phone]

PPM-5811 JK FRONT SEAT HARNESS TABS

Version 1.0

GENERAL NOTES:

• Read installation instructions fully prior to beginning installation.

• Check our website at www.synergymfg.com for updated instructions.

• These tabs are designed around standard 5 point crow harnesses which feature

clip in lap belts and bolt on submarine belts.

• For complete 5-point harness installation, use these tabs in conjunction with

harness bars found in 5223 JK 4dr B-pillar Tie-in kit, 5222 JK 2dr Rear Cage kit,
5222-04 JK 2dr harness bar.

• These harness tabs are a bolt on installation and can be installed with simple hand

tools.

PARTS LIST:

• (2) 581102-01 Submarine Belt Mounts (1L & 1R)

• (4) 581101-01 Lap Belt Tabs

INSTALLATION:

1) Begin by removing the front attachment bolts for the seat. Use an 18mm socket for
removal. Do one seat at a time These pictures are on the drivers side, repeat for
passenger side installation.

2) With the front seat attachment bolts removed, install the submarine mount. Note, the
brackets are left and right specific. The notch in the bracket goes towards the seat
and is there to clear the weld on the seat bracket itself. See image below for proper
orientation.