Data
Data
Sheet
Sheet
Module name：IA9QH5 SY5-A24 Module
Project Code：SMMSBRQHC58RH2
Product name:RF 5G Wireless Module (FPC type)
Version 0.1
Aug. 22, 2018
OEM/Integrators Installation Manual
Syncomm Technology Corp.
10F., No. 101, Sec. 2, Gongdao 5th Rd., East Dist., Hsinchu City, Taiwan, R.O.C.
Tel: +886-3-5169188
Fax: +886-3-5169111
http://www.syncomm.com.tw
SYNCOMM Confidential
E-Mail:
Web site:
sell@syncomm.com.tw
Http://www.syncomm.com.tw
1. Features
2. Application
3. RF Specification
4. Audio Specification
5. Electrical Specification
...................................................................................................................................................
...............................................................................................................................................
........................................................................................................................................
................................................................................................
.............................................................................................................................
6. Mechanical Specification
7. Block Diagram
8. Interface
9. Design Reference
10. Antenna Application
11. Ordering Information
12. Revision History
........................................................................................................
...................................................................................................................................................
...................................................................................................
..............................................................................................
.............................................................................................
.....................................................................................................
INDEX
错误！未定义书签。
.........................................................................................................................
错误！未定义书签。
错误！未定义书签。
错误！未定义书签。
错误！未定义书签。
错误！未定义书签。
3
3
4
5
6
7
This document is proprietary and confidential to Syncomm Technology Corp.
SYNCOMM Confidential
E-Mail:
Web site:
sell@syncomm.com.tw
Http://www.syncomm.com.tw
SYNIC and Intelligent Wireless are trademarks of Syncomm Technology Corp.
All other trademarks and registered trademarks are the property of their respective owners.
SYNCOMM Confidential
E-Mail:
Web site:
sell@syncomm.com.tw
Http://www.syncomm.com.tw
1. Features
5.2GHz/5.8GHz ISM Band
GFSK modulation
Low BOM cost
Long distance > 30m (Line of sight)
Support 1-1 duplex mode or 1-N broadcasting mode
Digital I2S audio interface
Support no audio detection function
Support compression/un-compression mode
Antenna diversity
Short delay time variation
IA9QH5 SY5-A24 MODULE V0.1 page - 4 -
Audio format 16/24bit , 32/44.1/48K/96KHz sampling rate
Robust Packet error correction
Low power consumption
No RF induced audio noise
Audio latency time < 20ms
(Programmable according customized spec.)
2. Application
Wireless HTiB Rear Speaker
Wireless Outdoor Speaker
Wireless TV theater
Wireless Audio Sender
Wireless Headphone
Wireless Stereo Ear Microphone
SYNCOMM Confidential
E-Mail: sell@syncomm.com.tw
Web site: Http://www.syncomm.com.tw
3. RF Specification
Item
Min
Typ
Max
Unit
Note
Channel Range
5160
─
5240
MHz
-20dB bandwidth
─
2.7
─
MHz
2M Mode
RF Output Power
11
dBm
Peak power at Antenna port
Sensitivity
─
-91
─
dBm
The smaller, the better
Item
Min
Typ
Max
Unit
Note
Channel Range
5735
─
5840
MHz
-20dB bandwidth
─3─
MHz
2M Mode
RF Output Power
11
dBm
Peak power at Antenna port
Sensitivity
─
-89
─
-
dBm
The smaller, the better
Table 1 5.2GHz RF Specification
IA9QH5 SY5-A24 MODULE V0.1 page - 5 -
Table 2 5.8GHz RF Specification
SYNCOMM Confidential
E-Mail: sell@syncomm.com.tw
Web site: Http://www.syncomm.com.tw
4. Electrical Specification
Item
Min
Typ
Max
Unit
Note
Power Supply Voltage
3.0
3.3
3.6
V
Consumption Current
(TX_MODE)
132
mA
No GPIO driving , 0.1CH
Mode
Consumption Current
(RX_MODE)
91
mA
No GPIO driving , 0.1CH
Mode
Operating Temperature
02555
℃
Item
Symbol
Parameter
Min
Typ
Max
Unit
Conditions
VIHInput High Threshold
2.0─3.33
V
LDO_OUT=3V
VILInput Low Threshold
-0.3─0.8
V
LDO_OUT=3V
VOHOutput High Threshold
2.4
──V
LDO_OUT=3V
VOLOutput Low Threshold
─
─
0.4
V
LDO_OUT=3V
IA9QH5 SY5-A24 MODULE V0.1 page - 6 -
Table 5
Table 6
SYNCOMM Confidential
E-Mail: sell@syncomm.com.tw
Web site: Http://www.syncomm.com.tw
5. Mechanical Specification
6.1 No Shielding Case
Dimension：35 * 35 * 1 mm
PCB 4 Layers
Mechanical Drawing：
IA9QH5 SY5-A24 MODULE V0.1 page - 7 -
Fig 6.1 Mechanical Drawing of SY5-A24 Module
SYNCOMM Confidential
E-Mail: sell@syncomm.com.tw
Web site: Http://www.syncomm.com.tw
Interface
Pin
Name
I/O
TX Function Define
RX Function Define
1
GPIO11
I/O
GPIO
GPIO
2
GPIO15
I/O
GPIO
GPIO
3
I2C_DATA_S
I/O
I2C Master/Slave data signal
GPIO
4
I2C_CLK_S
I/O
I2C Master/Slave clock signal
GPIO
5
I2C_DATA_M
I/O
GPIO
I2C Master/Slave data signal
6
I2C_CLK_M
I/O
GPIO
I2C Master/Slave clock signal
7
GPIO 31
I/O
GPIO
GPIO
8
GPIO 13
I/O
GPIO
GPIO
9
SPB_I2S_BCK
I/O
SPB I2S audio BCK
SPB I2S audio BCK
10
SPB_I2S_LRCK
I/O
SPB I2S audio LRCK
SPB I2S audio LRCK
11
SPB_I2S_MCLK
I/O
SPB I2S audio MCLK
SPB I2S audio MCLK
12
DGND
P
Digital GND
Digital GND
13
SPA_I2S_BCK
I/O
SPA I2S audio BCK
SPA I2S audio BCK
14
SPA_I2S_LRCK
I/O
SPA I2S audio LRCK
SPA I2S audio LRCK
15
SPA_I2S_DATA
I/O
I2S DATA 0
SYNC LED
16
SPB_I2S_DATA
I/O
SPB I2S audio Data
SPB I2S audio Data
17
GPIO 21
I/O
GPIO
GPIO
18
GPIO 34
I/O
GPIO
GPIO
19
GPIO 16
I/O
GPIO
GPIO
20
GPIO 17
I/O
GPIO
AMP RESET(L Act)
21
GPIO 36
I/O
I2C_BUSY，Need 10K Pull High
Resistor
I2C_BUSY，Need 10K Pull High
Resistor
22
DGND
P
Digital GND
Digital GND
23
VCCIO
P
DC 3.0 ~ 3.6V IN
DC 3.0 ~ 3.6V IN
24
VCCIO
P
DC 3.0 ~ 3.6V IN
DC 3.0 ~ 3.6V IN
1
24
IA9QH5 SY5-A24 MODULE V0.1 page - 8 -
Fig 8.1 Pin sequence of SY5-A24 Module
SYNCOMM Confidential
E-Mail: sell@syncomm.com.tw
Web site: Http://www.syncomm.com.tw
Table 8 IO Function Define
IA9QH5 SY5-A24 MODULE V0.1 page - 9 -
SYNCOMM Confidential
E-Mail: sell@syncomm.com.tw
Web site: Http://www.syncomm.com.tw
FCC Statement
15.19
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
15.21
Note: The grantee is not responsible for any changes or modifications not expressly approved by
the party responsible for compliance. Such modifications could void the user’s authority to
operate the equipment.
15.105(b)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENTS
The RF 5G Wireless
Module complies with Part 15 of the United States of America FCC rules and regulations. The Orig
inal Equipment Manufacturer (OEM) must comply with the FCC certification requirements.
15.21 Any changes or modifications made to the module without the manufacturer’s approval
could void the user’s authority to operate the module.
Instructions to the OEM/Integrator:
This module has been granted modular approval for mobile applications. OEM integrators for
host products may use the module in their final products without additional FCC/ISED
(Innovation, Science and Economic Development Canada) certification if they meet the following
conditions. Otherwise, Additional FCC/IC approvals must be obtained.
⚫ The OEM must comply with the FCC labeling requirements. If the module’s label is not
visible when installed, then an additional permanent label must be applied on the outside of
the finished product which states: ”Contains transmitter module FCC ID: PJH-IA9QH5SY5A24”.
Additionally, the following statement should be included on the label and in the final
product’s user manual:
“This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interferences, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.”
⚫ The user’s manual for the host product must clearly indicate the operating requirements and
conditions that must be observed to ensure compliance with current FCC / IC RF exposure
guidelines.
⚫ The final host / module combination may also need to be evaluated against the FCC Part 15B
criteria for unintentional radiators in order to be properly authorized for operation as a Part
15 digital device.
⚫ This Module is full modular approval, it is limited to OEM installation ONLY.
⚫ The module is limited to installation in mobile application.
⚫ A separate approval is required for all other operating configurations, including portable
configurations with respect to Part 2.1093 and difference antenna configurations.
⚫ The OEM integrator is responsible for ensuring that the end-user has no manual instruction
to remove or install module.
⚫ The Grantee will provide guidance to the Host Manufacturer for compliance with the Part
15B requirements if requested.
IC Statement
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
IC 20cm RF
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance of 20 cm
between the radiator and your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements de la IC établies pour un
environnement non contrôé. Cet équipement doit être installé et fonctionner à au moins 20 cm de
distance d’un radiateur ou de votre corps.
Loading...