Synco MIC-D2 User guide

Guangzhou Zhiying Technology Co., Ltd

Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
[e-mail]
www.syncoaudio.com
https://www.facebook.com/syncomicrophones

MIC-D2 Microphone

Please read this manual carefully before use and follow all instructions mentioned herein.

Thank you for choosing SYNCO Mic-D2,

User Manual

Contents

Package List.....................................................................................................................................1

Feature Introduction.......................................................................................................................2

Caring For Your SYNCO Mic-D2 Microphone................................................................................2

Mounting the Shotgun Mic............................................................................................................4

Speci󽗉cations..................................................................................................................................3

① Polar Pattern
② Frequency Response

③ Performance Parameter

Warranty...........................................................................................................................................5

Package List

(Package includes the following items)

SYNCO Mic-D2 Microphone x1

Feature Introduction

Shotgun Directional Microphone with High Sensitivity
Hyper Cardioid Pattern, Great Pickup E󽗈ect
Solid Brass Body, Highly Anti-Interference
Extremely Low Self-Noise
Ultra-󽗊at Frequency Response
3-Pin XLR Connector
Wide Usage Occasions
Mini MIC Holder with 3/8” and 5/8” Connector
Original Sound Reproduction

XLRM-XLRF Cable x1

Windscreen x1

1 www.syncoaudio.com www.syncoaudio.com 2

Mic Holder

with 5/8"-3/8" Connector x1

Protection Box x1

User Manual

User Manual x1

Caring For Your SYNCO Mic-D2 Microphone

Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics

damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.

Mounting the Shotgun Mic

1. The MIC-D2 microphone can be mounted on a
boom pole or tripod through a mini holder with
3/8" and 5/8" connector.

2. A cotton windshield will minimize the
environmental noise when shooting videos.

Speci󽗉cations

1. Polar Pattern: Hyper Cardioid

2. Frequency Response

-20

-30

-40

-50

-60

-70
20

50 100 200 5001 K2 K5 K 10K 20K

3. Performance Parameter

Element
Polar Pattern

3. A 19.7 inches XLRM - XLRF cable connecting the
mic to other equipments.

4. Mount on a camcorder

Frequency Response
Bass
Sensitivity
Output Impedance
Max.Input SPL
Signal to Noise Ratio
Dynamic Range

3 www.syncoaudio.com www.syncoaudio.com 4

Back Electret Condenser
Hyper-Cardioid
20Hz-20kHz
Built-in

-32dB±3dB（1dB=1V/Pa at 1kHz）
450Ω±20%（at 1kHz）
130dB（T.H.D≤1% at 1kHz）
80dB（1KHz at 1Pa）
117dB（1kHz at Max SPL）

Power Requirements
Weight
Body Dimensions
Output Interface

48V DC ，2mA
165g

0.75*9.84 inches
XLRM

The code on product is inconsistent with that of warranty certi󽗉cate, or the code on the product or
warranty certi󽗉cate is altered or torn o󽗈

All consumable accessory attached to a product, like cable, wind mu󽗈, battery

Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

Warranty Claim Procedure

WARRANTY

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the
product under normal use within 30 days upon receipt of the product.

2. Original SYNCO products are entitled to 24-month limited warranty service. The warranty period begins
on the date of purchase of brand new, unused products by the 󽗉rst end-user.

Within the warranty period, if product defect or failure is attributable to material defection or
technological problem, the defective product or defective part will be repaired or replaced without charge
(service and materials fee).

If failure or any problem occurs to your product after purchase, please contact a local agent for
assistance, or you can always contact SYNCO’s customer service through email at
[e-mail].

Please retain your sales receipt and warranty certi󽗉cate as proof of purchase. If any of these documents
is missing, only sales return or chargeable service will be provided.

If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its operation speci󽗉cation

Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

Modi󽗉cations to a product by its user or a third party without prior written consent of SYNCO, e.g.
replacement of element or circuit, label alteration

5 www.syncoaudio.com www.syncoaudio.com 6

WARRANTY CERTIFICATE

Please register your warranty. Meanwhile, you are welcomed to contact us via Email：

Customer Name:

USER
INFORMATION

SALES
INFORMATION

REPAIR
RECORD

Phone Number:

Email:

Address:

Sales Date:

Model:

Product Code:

Dealer:

Service Date:

Technician:

Issue:

[e-mail]

RESULT

Solved Unsolved Returned(Replaced)