Synchross BS77 Instruction Manual

Front Page

- Logo

Instruction

Manual

Power On/Off Press and hold

AUX IN

USB (Charging)

1) Blinking of Play/Pause: Charging

2) Solid of Play/Pause: Charging cycle done

Reset Use a pin to reset the system

Back view

USB

Reset

BS77

Use the included audio cable to connect the audio output

of your device to the Line In input on the speaker.

Use the included USB adapter to connect to the USB on

the speaker. Charging status indicator on Play/Pause key:

Power On/Of

AUX IN

BS77

Touch panel

Play/Pause

Blinking: Indicate low battery

Volume Up/Down

Press and hold to start searching Bluetooth source

1.) Blinking: Speaker attempting to connect to a paired device.

2.) Solid: Speaker connected to paired device.

3.) If unable to connect within five minutes, Bluetooth stop

searching for source

1) Press to answer/end calls.

2) Blinking: Indicate unanswered calls.

BS77

Cannot see the buttons in the dark?

Night Vision: Press Power ( )

Afraid of mis-touching the buttons while carrying the speakers?

Lock/Unlock the touch panel:

1) Press and hold the Play/Pause ( ) until all the

buttons on touch panel blink twice

2) Under Lock: Press any button on the touch panel, all the

buttons blink twice and disabled functions.

More featuring functions

Suggestion: Despite BS77 is IPX7-RATED Waterproof, the sensibility of

the touch panel will be better induced in dry condition. We recommend

you to wipe off water droplet(s) from the touch panel before usage.